Browsing by Title

Sort by: Order: Results:

  • EEE Question Papers: Winter Semester 2022-2023 Mid-Semester Examination 
    Unknown author (2023-10-15)
  • Effect of Ball Burnishing Parameters on the Surface Roughness by a Burnishing Tool with Magnetic Ball Holding Device 
    Hasan, Muhammad Khaled Aminul (Department of Mechanical and Production Engineering (MPE), 2017-11-15)
    In this study four burnishing parameters were selected for optimizing the burnishing process using Taguchi method. The examined burnishing parameters include: (1) Burnishing speed, (2) Force and (3) Feed rate and (4) Ball ...
  • The Effect of Different Types of Aggregate on the Durability of Concrete : Carbonation 
    Nahian, Zihan Mahmood; Sakib, Ann Nazmun; Sakib, Md. Sadman; Jaman, Muhammad Asif (Department of Civil and Environment Engineering, Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    Highly desirable durability requirement for concrete is not always achieved in practice due to various environmental factors. Corrosion of reinforcement in concrete is a common cause of deterioration in many RC structures. ...
  • Effect of existing nearby structures in tunnel excavation at TSC area 
    Nazrul, Fuad Bin; Islam, Mohaimenul; Umama, Mohammad Abu; Mansur, Mahdi (2021-03-15)
    Urban underground structures e.g. construction of subway tunnels are a crucial part of Geotechnical Engineering. Existing nearby structures have a significant impact on construction and excavation work. Until starting ...
  • Effect of Existing Nearby Structures in Tunnel Excavation at TSC Area 
    Nazrul, Fuad Bin; Islam, Mohaimenul; Umama, Mohammad Abu; Mansur, Mahdi (Department of Civil and Environmental Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    Urban underground structures e.g. construction of subway tunnels, are a crucial part of Geotechnical Engineering. Existing nearby structures have a significant impact on construction and excavation work. Until starting the ...
  • Effect of Fatigue on Traffic Violations of Bus Drivers 
    Mahamud, Hayat; Saif, Adib; Rimol, Abu Hasan; Tahmid, Ahnaf (Department of Civil and Environment Engineering, Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    Road accident has become a daily and deadly phenomenon in Bangladesh which has one of the worst crash rates in the world, at more than 60 per 10,000 registered motor vehicles. The official death toll for road traffic ...
  • Effect of holes placed on the perforated finned heat exchanger at different angles on the Nusselt and Reynolds numbers 
    Saad, Muhammad (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    In this research, 6mm diameter holes were opened on each circular fin on a heating tube in order to increase convective heat transfer. This is different from the other studies in the literature. These holes were placed ...
  • Effect of land use on the water quality of the Turag River 
    Zaman, Md. Rafiu; Noman, Abu Saeed Md. (Department of Civil and Environmental Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2015-11-15)
    Dhaka is one of the most densely populated cities in the world. The population of Dhaka is now more than 15 million (1). The population of Dhaka is increasing day by day. Same thing is happening in the northern part of the ...
  • Effect of Mechanical Vibrations In Sand Casting of Aluminium Alloy Using Organic Binders 
    Mahmud, Safayet; Rownak, Ragib (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)
    This paper represents a systematic finite element analysis to evaluate the various mechanical vibration impacts on sand mold casting during aluminum alloy cooling. In general, the mold materials govern the molten metal ...
  • Effect of Point and Line Defects on the Mechanical Behavior of Single Layer MoTe2 
    Aziz, Md. Jobayer (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
    Following the groundbreaking discovery of graphene, the scientific community has witnessed a surge of interest in two-dimensional (2D) materials during recent times, remarkable capabilities and versatility for technological ...
  • Effect of Rake Angle & Relief Angle in Chip Formation During Turning Operation 
    Ahmed, Tanvir; Anik, Eftekharul Hoque; Rythm, Fahim Ajmal (2018-11-15)
    The simulation of various machining processes is a matter of interest in active research for over two decades. This study develops a combined simulation based and experimental approach to find the effect of rake Angle & ...
  • Effect of rake angle and cutting speed in chip morphology and prediction of tip temperature and cutting forces with FEA software 
    Khalid, Saifullah; Tanzil, Sifat Ullah (IUT, MCE, 2016-11-20)
    To minimize experimental time and expensive experimental test, researchers always refer FEA as most effective system. In this paper, we tried to show the effect of rake angle, cutting speed in chip morphology for different ...
  • Effect of Reinforcement In Slope Stabilization of Road Embankment of Dhaka-Feni Express Way 
    Jabbar, MD. Abdul; Mahmood, Nabil; Rabbi, Md. Tariqul Islam (Department of Civil and Environmental Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    Slope stability is the potential of soil covered slopes to withstand and undergo movement. Stability can be determined by the balancing of shear stress and shear strength. A stable slope can be initially affected by ...
  • Effect of Scouring Around Bridge Piers 
    Enam, Samin (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    A series of relatively recent bridge failures due to pier scour, as reported in literature, has rekindled interest in furthering our understanding of the scour process and for developing improved ways of protecting bridges ...
  • The Effect of Social, Economic and Political Factors on Student Migration to Bangladesh 
    Usman, Abdulhakim (Departmental of Technical and Vocational Education(TVE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2022-05-30)
    Investigating the international students’ decision to travel to Bangladesh for study purposes was a study long overdue. In this study, we strove to look into the minds of the international students to find out the ...
  • Effect of tool geometry ob chip morphology and cutting parameters in turning process by FEM analysis 
    Meem, Rahnum Tahia (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
  • Effect of Tool Geometry on Chip Morphology and Cutting Parameters in Turning Process by FEM Analysis 
    Meem, Rahnum Tahia (Department of Mechanical and Production Engineering, 2021-03-30)
    The purpose of this study is to analyze various parameters like temperature, pressure, max shear stress etc while keeping two parameters constant
  • Effect of ultrasonic sound wave on machinability parameters during turning operation of mild steel 
    Russel, Md. Omar Faruque (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    This project aims to investigate the effects of ultrasonic sound signal on the machinability control of mild steel during turning operation. The machinability responses include tool wear, surface roughness, temperature, ...
  • Effect of Variation of Aerodynamic Brake Plate Orientation and Multiple Brake Geometries on Incident Drag of Hyperloop Pod 
    Khan, Shahnoor Shamim; Mahmud, Shadman; Adnan, Adib (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    The idea for the Hyperloop has received significant attention, with commentators and analysts expecting it to become a revolutionary and potentially the fastest mode of land transportation on the planet. Various companies ...
  • Effective Data Extraction from Underwater Using Sensor-Delay Tolerant Network (S-DTN) 
    Sharif, Nasif Ahmed; Ahmed, Shihab Nayeem; Ahmed, Redwan (Department of Electrical and Electronic Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh, 2013-11-15)
    Delay-tolerant networking (DTN) is a term invented to describe and encompass all types of long-delay, disconnected, disrupted or intermittently-connected networks, where mobility and outages or scheduled contacts may be ...

Search IUT Repository

Browse

My Account