• Parametric Analysis of Thermal performance of Earth-To-Air-Tunnel-Heat Exchanger (EATHE) 

  Rana, Masud (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-07-30)

  The Earth-to-Air-Tunnel-Heat Exchanger (EATHE) is one of several ambient air conditioning systems with minimum cost. Several factors and conditions will enhance the performance of the installed EATHE in room air conditioning ...
• Optimization of Maintenance Management Framework in LPG Cylinder Manufacturing 

  Sarker, Md Shamsuzzoha (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-06-30)

  Maintenance can be defined as actions necessary for retaining or restoring a piece of equipment, machine or system to the specified operating conditions to achieve its maximum useful life. Maintenance ensures that ...
• A Numerical Investigation of Local Scour Around Different Shape of Bridge Piers and Its Reduction 

  Hasan, Rumana (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-06-30)

  Around the world, local scour is one of the leading causes of bridge collapses and other hydraulic structure failures. The study demonstrates the scour depth and fluid dynamics of different shaped bridge piers, including ...
• Detection of Cracks in a Cantilever Metal Plate Using Vibrational Techniques 

  Shuvo, Sharif Rezwan (Department of Mechanical and Production Engineering, 2020-09-30)

  The main objective of this research is to detect crack at different positions of the thin metal cantilever plate based on the natural frequency. Most of the researchers have investigated on beam. Few researchers have ...
• Numerical and Experimental Investigation of Shock wave Propagation in the Open Atmosphere 

  Ehsan, Mohammad Monjurul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)

  Shock wave propagation in the open atmosphere has been investigated both numerically and experimentally. Three-dimensional numerical code has been used to solve the Euler equations for the upstream and downstream parameters ...
• Thermal Performances of Two-metal Micro Heat Pipes (TMMHP) 

  Iqbal, KMN Sarwar (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)

  Electronic machines are rapidly being developed with the increasing benefits but, getting smaller in sizes resulting in more thermal stress. In an attempt to manage this stress, a comparative study is conducted between a ...
• Study of Hybrid Photovoltaic Solar Thermal systems during summer months in Bangladesh 

  Miah, Sohel (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)

  A hybrid photovoltaic (PVT) solar system combines a simultaneous conversion of the absorbed solar radiation into electricity and heat. In this study the design of an experimental PVT/dual system, both air & water circulation ...
• Study of Product Design Perspectives for Manufacturing Refrigerators in Bangladesh using Analytic Hierarchy Process (AHP) 

  Ahmed, Farhad (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)

  Product design is a new engineering practice in Bangladesh. Now-a-days different companies are showing willingness on manufacturing engineering products in Bangladesh, where product designing is playing very important ...
• Investigation and Optimization of the Effects of Application of Ultrasonic Sound Frequencies during Turning Operation of Steel on Machinability Responses 

  Chowdhury, Mohammad Shariful Islam (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)

  Turning is one of the most common and popular process in industry for manufacturing metallic products. The two single most important output parameters that define the product quality are surface roughness and tool wear. ...
• Computational investigation of pulsatile blood flow in the models of arterial stenosis and aneurysm 

  Miah, Md. Abdul Karim (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2018-03-30)

  A numerical analysis based on a finite volume approach is employed for a 2-D axisymmetric, incompressible, laminar flow of mean Reynolds number of 578 so as to simulate and compare the pulsatile blood flow in the models ...
• Life Cycle Assessment of Renewable Energy Technologies of Bangladesh 

  Baky, Md. Abdullah Hil (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2017-08-30)

  As the benefit of the renewable energy systems getting more and more clear to people, these are being introduced in small scale and large scale in both developed and developing countries. Renewable energy systems show a ...
• Stress and Vibration Analysis of a MDOF Excavator Bucket 

  Islam, Md Shahriar (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2015-11-15)

  Multi degrees of freedom (MDOF) excavator is a very popular machine in today’s mining industry and are also popularly used in roads and building constructions or demolition and for material handling. All these uses involve ...
• Prediction and Optimization of Quality of Drilled Holes During Magnetic Drilling Operation of Glass Fiber Reinforced Polymer Composite 

  Yusuf, Suleiman Mohammed (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2015-11-15)

  This study presents the results of an investigation of the use of Box Behnken design approach to plan the experiments for drilling GFRP composite under different magnetic conditions with an overall objective of optimizing ...
• Analysis of Mechanical Properties of Jute and Carbon Fiber Reinforced Epoxy Hybrid Composite 

  Sujon, Md Abu Shaid (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2020-03-30)
• Optimization of the Critical Production Process in a Textile Factory using AHP 

  Islam, Md. Tajul (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2020-12-24)

  The process of converting raw materials, components, or parts into finished goods that meet customer’s expectations or specifications is called the production process. Manufacturing commonly uses a man-machine set up with ...
• Performance analysis of a fully automated green Effluent Treatment Plant (ETP) 

  Aishan, AbdulazizMoqbelMoqbel (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)

  The major goal of this work is to focus the pollution scenario of our environment due to textile effluent from textile industries and how we can develop and upgrade our system so that the pollution level can be minimized. ...
• Development and Evaluation of a Green Composite Materials from Natural Fibers 

  Bhuiyan, Md.Shah Alam (Department of Electrical and Electronic Engineering, Islamic University of Technology,Board Bazar, Gazipur, Bangladesh, 2019-11-15)

  In the area of technological advancement, environmental awareness are always drawing the attention of the scientists for eco-friendly and recyclable products. Different kinds of composite materials are available in the ...
• Improvement of Operational Quality of a Labeling and Packaging Industry by Implementing Lean Manufacturing Process 

  Rizvan, Ratul (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2018-11-15)
• The augmentation of film cooling effectiveness of gas turbine (GT) blades by incorporating novel techniques 

  Awais, Muhammad (Department of Mechanical and Production Engineering Islamic University of Technology (IUT), Board Bazar,Gazipur-1704, Bangladesh., 2020-09-21)

  Modern gas turbine engines operate at significantly high temperatures to improve thermal efficiency and power output to a greater extent. The enhancement in rotor inlet temperature (RIT) increases the heat transfer rate ...
• 3D CFD based optimized muffler design, construction and prototype validation of motorcycle 

  Anwar, Ahmad Syed (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2016-11-15)

  In order to minimize the sound transmission due to exhaust gases, the most common and important part of the engine system is muffler. A backpressure on engine is always produce due to the use of the exhaust muffler. This ...

View more