IUT Repository Home
→
Mechanical and Production Engineering (MPE)
→
Thesis
→
Graduate
→
Recent submissions

Graduate: Recent submissions

Now showing items 1-20 of 29

Thermo-economic Analysis and Multi-Objective Optimization of Advanced Three-Stage Cascaded Refrigeration Technologies

Nabil, Mahdi Hafiz (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-11-30)

The rising global demand for refrigeration, driven by industrial, medical, and technological needs, necessitates advancing highly performing and environment-friendly cooling technologies. This study explores advanced ...
A Machine Learning Based Modeling and Analysis of Solar-Assisted Thermal Power Plant in Bangladesh

Hasan, Muhammad Mahmood (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-10-30)

Global climate change, driven by carbon emissions from fossil fuels, has accelerated the global transition toward renewable energy sources. A major challenge with renewable energy, particularly solar energy, is its ...
Thermal Analysis and Multi-Objective Optimization of Cascaded and Advanced Absorption Refrigeration Technologies

Khan, Yasin (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-05-25)

This thesis presents an in-depth analysis of advanced modifications of absorption refrigeration systems, with the primary aim of enabling these systems to operate at reduced evaporator temperatures while achieving higher ...
Thermal Assessment and Performance Evaluation of Evacuated Flat Plate Collector

Rahman, Md. Ashiqur (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-06-11)

The transition towards renewable energy technologies is gaining momentum, especially within industrial domains seeking sustainable alternatives to traditional energy sources. Among these technologies, the Evacuated Flat ...
Investigation of the NOx and SOx Emissions from Large-Scale Coal-Based Power Plants

Firoz, Mahmudul (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-06-12)

Coal-fired power plants are a pivotal source of energy in Bangladesh, a country with abundant coal reserves. Yet, the environmental and health risks linked to the greenhouse gas emissions from these plants are significant ...
Numerical Study of Emission Control of Urban and Rural Kitchens for Healthy Environment

Rahman, Md. Hamidur (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2016-03-28)

Lack of proper ventilation of exhaust fumes from gas and biomass fired stoves in both urban and rural residential kitchens are a major health concern for majority populations. It could even cause destruction of property, ...
Parametric Analysis of Thermal performance of Earth-To-Air-Tunnel-Heat Exchanger (EATHE)

Rana, Masud (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-07-30)

The Earth-to-Air-Tunnel-Heat Exchanger (EATHE) is one of several ambient air conditioning systems with minimum cost. Several factors and conditions will enhance the performance of the installed EATHE in room air conditioning ...
Optimization of Maintenance Management Framework in LPG Cylinder Manufacturing

Sarker, Md Shamsuzzoha (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-06-30)

Maintenance can be defined as actions necessary for retaining or restoring a piece of equipment, machine or system to the specified operating conditions to achieve its maximum useful life. Maintenance ensures that ...
A Numerical Investigation of Local Scour Around Different Shape of Bridge Piers and Its Reduction

Hasan, Rumana (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-06-30)

Around the world, local scour is one of the leading causes of bridge collapses and other hydraulic structure failures. The study demonstrates the scour depth and fluid dynamics of different shaped bridge piers, including ...
Detection of Cracks in a Cantilever Metal Plate Using Vibrational Techniques

Shuvo, Sharif Rezwan (Department of Mechanical and Production Engineering, 2020-09-30)

The main objective of this research is to detect crack at different positions of the thin metal cantilever plate based on the natural frequency. Most of the researchers have investigated on beam. Few researchers have ...
Numerical and Experimental Investigation of Shock wave Propagation in the Open Atmosphere

Ehsan, Mohammad Monjurul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)

Shock wave propagation in the open atmosphere has been investigated both numerically and experimentally. Three-dimensional numerical code has been used to solve the Euler equations for the upstream and downstream parameters ...
Thermal Performances of Two-metal Micro Heat Pipes (TMMHP)

Iqbal, KMN Sarwar (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)

Electronic machines are rapidly being developed with the increasing benefits but, getting smaller in sizes resulting in more thermal stress. In an attempt to manage this stress, a comparative study is conducted between a ...
Study of Hybrid Photovoltaic Solar Thermal systems during summer months in Bangladesh

Miah, Sohel (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)

A hybrid photovoltaic (PVT) solar system combines a simultaneous conversion of the absorbed solar radiation into electricity and heat. In this study the design of an experimental PVT/dual system, both air & water circulation ...
Study of Product Design Perspectives for Manufacturing Refrigerators in Bangladesh using Analytic Hierarchy Process (AHP)

Ahmed, Farhad (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)

Product design is a new engineering practice in Bangladesh. Now-a-days different companies are showing willingness on manufacturing engineering products in Bangladesh, where product designing is playing very important ...
Investigation and Optimization of the Effects of Application of Ultrasonic Sound Frequencies during Turning Operation of Steel on Machinability Responses

Chowdhury, Mohammad Shariful Islam (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)

Turning is one of the most common and popular process in industry for manufacturing metallic products. The two single most important output parameters that define the product quality are surface roughness and tool wear. ...
Computational investigation of pulsatile blood flow in the models of arterial stenosis and aneurysm

Miah, Md. Abdul Karim (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2018-03-30)

A numerical analysis based on a finite volume approach is employed for a 2-D axisymmetric, incompressible, laminar flow of mean Reynolds number of 578 so as to simulate and compare the pulsatile blood flow in the models ...
Life Cycle Assessment of Renewable Energy Technologies of Bangladesh

Baky, Md. Abdullah Hil (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2017-08-30)

As the benefit of the renewable energy systems getting more and more clear to people, these are being introduced in small scale and large scale in both developed and developing countries. Renewable energy systems show a ...
Stress and Vibration Analysis of a MDOF Excavator Bucket

Islam, Md Shahriar (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2015-11-15)

Multi degrees of freedom (MDOF) excavator is a very popular machine in today’s mining industry and are also popularly used in roads and building constructions or demolition and for material handling. All these uses involve ...
Prediction and Optimization of Quality of Drilled Holes During Magnetic Drilling Operation of Glass Fiber Reinforced Polymer Composite

Yusuf, Suleiman Mohammed (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2015-11-15)

This study presents the results of an investigation of the use of Box Behnken design approach to plan the experiments for drilling GFRP composite under different magnetic conditions with an overall objective of optimizing ...
Analysis of Mechanical Properties of Jute and Carbon Fiber Reinforced Epoxy Hybrid Composite

Sujon, Md Abu Shaid (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2020-03-30)

Now showing items 1-20 of 29

Search IUT Repository

Advanced Search

Browse

All of IUT Repository
This Community
- By Issue Date
- Authors
- Titles
- Subjects

Recently added

Graduate: Recent submissions

Search IUT Repository

Browse

All of IUT Repository

This Community

My Account