Design & Fabrication of Vortex Tube for Industrial Cooling

Abeer, Arik Inkiyad; Uddin, Md. Misbah; Khan, Muhammad Hamza; Rahma, Yousif; Alkasim, Hassan; Hayat, Khurram

IUT Repository Home
→
Mechanical and Production Engineering (MPE)
→
Thesis
→
Undergraduate
→
2017
→
View Item

dc.contributor.author	Abeer, Arik Inkiyad
dc.contributor.author	Uddin, Md. Misbah
dc.contributor.author	Khan, Muhammad Hamza
dc.contributor.author	Rahma, Yousif
dc.contributor.author	Alkasim, Hassan
dc.contributor.author	Hayat, Khurram
dc.date.accessioned	2021-10-07T05:03:05Z
dc.date.available	2021-10-07T05:03:05Z
dc.date.issued	2017-11-15
dc.identifier.citation	 Hilsch R (1947) the Use of Expansion of Gases in a Centrifugal Field as a Cooling Process. Review of Scientific Instruments 18 (2), 108 – 13 .  N.F. Aljuwayhel, G.F. Nellis, S.A. Klein, Parametric and internal study of the vortex tube using a CFD model, University of Wisconsin-Madison, 1500 Engineering Drive, Madison, WI 53706, USA  M. KUROSAKA, Acoustic streaming in swirling flow and the Ranque-Hilsch (vortex-tube) effect  Xue, Y., Arjomandi, M., Kelso, R., The working principle of a vortex tube, International Journal of Refrigeration (2013), doi: 10.1016/j.ijrefrig.2013.04.016.  Mahesh Kumar Dhangar, Manujendrasharma, Mangu Singh Chouhan, Designing Aspects of a Vortex Tube Cooling System, Department Of Mechanical Engineering, MIT Mandsaur  Rahim Shamsoddini, Alireza Hossein Nezhad, Numerical analysis of the effects of nozzles number on the flow and power of cooling of a vortex tube  K. Dincer , S. Tasdemir , S. Baskaya , B.Z. Uysal , Modeling of the effects of length to diameter ratio and nozzle number on the performance of counter flow Ranque–Hilsch vortex tubes using artificial neural networks  Yunpeng Xue , Maziar Arjomandi, The effect of vortex angle on the efficiency of the Ranque–Hilsch vortex tube	en_US
dc.identifier.uri	http://hdl.handle.net/123456789/1114
dc.description	Supervised by Dr. A.R.M. Harunur Rashid, Assistant Professor, Department of Mechanical and Chemical Engineering (MCE), Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh.	en_US
dc.description.abstract	A cooling system is very important for both man and machine. In general vapor compression refrigeration system and vapor absorption refrigeration system are used for refrigeration purpose. Vortex tube cooling system is a non-conventional type of cooling system which is not used widely for cooling purpose. But it has many advantages over the conventional cooling system. This project attempt has been made to construct a counter flow vortex tube and its experimental setup has also been designed. Our objective is to check the performance of counter flow vortex tube by changing the various geometrical parameters such as Tube Length and diameter of hot end pipe and cold end pipe, Ratio of tube length over diameter and Vortex angle so that we increase the performance of the vortex tube. We had also predicted some of the experimental data that are available and observed the performance variation by changing working parameters at inlet such as temperature and pressure.	en_US
dc.language.iso	en	en_US
dc.publisher	Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh	en_US
dc.title	Design & Fabrication of Vortex Tube for Industrial Cooling	en_US
dc.type	Thesis	en_US