IUT Repository Home
→
Mechanical and Production Engineering (MPE)
→
Thesis
→
Undergraduate
→
2016
→
Browsing 2016 by Issue Date

Browsing 2016 by Issue Date

Now showing items 1-20 of 22

Investigation of microalgae biomass as a potential source of bio-fuel for Bangladesh

Bin Karim, Shabab; Ishmam, Shitab; Rahman, Wasel-Ur- (IUT, MCE, 2016-11-20)

Fossil fuel energy resources are unsustainable. World reserves are gradually depleting and the greenhouse gas emissions associated with their use are contributing to global warming. Therefore, there are vigorous research ...
Determining factors hampering the implementation of techniques for the reduction of prominent wastes in export-oriented garments factories: a case study

Rahman, Hussein Areefur; Islam, Shehroze (IUT, MCE, 2016-11-20)

In the competitive global market, the position of garments industry, the most important remittance-earning industry, is deteriorating by day due to numerous reasons one of which being increase in cost. To keep up with ...
Investigation of Surface Roughness and Burr Height of Al/Al2O3/Gr Metal Matrix Composite for Various Drilling Parameters

Saadat, Sadman; Anan, Md. Abid Hasan (IUT, MCE, 2016-11-20)

Drilling is a simple and common metal removal process and is important for the final fabrication stage prior to application.This paper discusses the influence of cutting parameters on drilling characteristics of pure ...
A comparative study of vibrational characteristics of carbon fiber composite sandwich plates with truss-cores of different lattice structures

Hassan, Mehedi; Nayeem, Md. Abu (IUT, MCE, 2016-11-20)

The effective vibrational characteristics of sandwich plates with truss-cores of pyramidal truss lattice structure and reciprocal double-pyramidal truss lattice structure made of carbon fiber composite have been investigated ...
CFD analysis of steady and transient natural convection in an enclosed cavity

Mehedi, Tanveer Hassan; Tahzeeb, Rahat Bin (IUT, MCE, 2016-11-20)

The research is conducted to find out the critical width of insulation in air insulated walls seen in residential buildings and industrial furnaces. Natural convection between two differentially heated walls have been ...
Cricket bat :

Hasan, A. A. Mahmud; Alam, Shariar (IUT, MCE, 2016-11-20)

In the game of cricket importance of using the right type of bat is very crucial. Boundaries of laws set by the MCC does not permit massive alteration of traditional bat design, materials and its manufacturing process. Yet ...
Design Simulation and Fabrication of vehicle exhaust gases emission control system

Mehmood, Aqib; Bilal, Hazrat (IUT, MCE, 2016-11-20)
Redesigning of a warehouse facility layout for improving the inventory management system: a case study

Razee, Syed Muqsit (IUT, MCE, 2016-11-20)

Warehouse layout is a classical production problem in engineering environment. Warehouse design often has a significant impact on the performance of a manufacturing plant. In modifying the warehouse floor layout, main issue ...
Study of the effect of external vibration on surface roughness after burnishing by a vibration assisted flexible burnishing tool

Rahman, Wahidur; Chowdhury, Asif Alam; Tousif, Rahat Latif (IUT, MCE, 2016-11-20)

Burnishing is a very simple and effective method for improvement in surface finish and can be carried out using existing machines, such as lathe. Quality of Surface is an important factor to decide the performance of a ...
Optimization of surface roughness on aluminium milling operation by peltier cooling effect

Sanglap, Md. Tanzib Ehsan; Ahnaf, Md. Golam (IUT, MCE, 2016-11-20)

The ultimate goal in the manufacturing of a part is to achieve an economic production plan with precision and accuracy in the first attempt at machining. A physics-based comprehensive modelling of the machining processes ...
Transitional change of conventional manufacturing system towards lean manufacturing system into the apparel manufacturing industry: a case study

Islam, Md. Aminul; Ashfaq, Shaikh (IUT, MCE, 2016-11-20)

Traditionally operated garment industries are facing problems like low productivity, longer production lead time, high rework and rejection, poor line balancing, low flexibility of style changeover etc. These problems were ...
Effect of rake angle and cutting speed in chip morphology and prediction of tip temperature and cutting forces with FEA software

Khalid, Saifullah; Tanzil, Sifat Ullah (IUT, MCE, 2016-11-20)

To minimize experimental time and expensive experimental test, researchers always refer FEA as most effective system. In this paper, we tried to show the effect of rake angle, cutting speed in chip morphology for different ...
Effects of magnetism on the roughness of drilled holes of a glass fiber reinforced polymer composite material

Shahriar, Md. Ragib; Azam, Md. Firdous (IUT, MCE, 2016-11-20)

Have superior properties of the glass fiber reinforced polymer (GFRP) composite materials, the use of it is being accelerated recently. That is why the machining of these GFRP materials is a great concern for engineers. ...
Fire and safety engineering in the garment factory of Bangladesh

Arefin, Shamsul; Abedin, Saadman; Azam, Sheikh Shafqat (IUT, MCE, 2016-11-20)

In Bangladesh businesses are growing at an ever fast rate. New businesses are opening everyday in every possible sector. Taking purchasing power parity into account Bangladesh is the 44th largest economy in the world. ...
Construction of a plunger type experimental wave tank for validation studies

Islam, Md. Ishmam; Islam, Md. Asiful; Asif Hossain, Mohammad (IUT, MCE, 2016-11-20)

The design and construction of a small wave tank (flume) and associated equipment has been described. The wave tank is equipped with a plunger-type wave generator, capable of producing both regular and irregular waves. A ...
Study of environmental pollution by Petrol engines

Mohammed, Hammam Ali; Idris, Abdullahi; Mohammed, Abdallah (IUT, MCE, 2016-11-20)
A Case Study on the Successful Implementation of 5s Process and its benefits

Hossain, Zilkad; Ashraf, SK. Riad Bin (IUT, MCE, 2016-11-20)

5S is amongst the first and fundamental steps implemented by an enterprise towards the path of implementing Total Quality Management and continuous improvement at the operation level. 5S is a process designed to organize ...
Productivity and quality enhancement through implementation of Total Productive Maintenance (TPM) in a manufacturing plant

Rashid, Md. Mynur; Alam, Rabiul (IUT, MCE, 2016-11-20)

Plant and equipment maintenance is a vital issue in manufacturing. The cost of regular maintenance might be low but the major breakdown of a machine can halt the entire production line. On the other hand effective machine ...
Vibration analysis and effect of internal Stiffener on the structural response of Steel wind turbine tower

Islam, Md. Mirazul; Al Saeed, Abdullah (IUT, MCE, 2016-11-20)

In this paper, the structural response of steel tubular wind turbine towers with various design configuration is analyzed using FEM modeling. 50m tower with 3 different design option as follows: i) tower without stiffener, ...
Optimisation of Process Parameters using the Hybrid Algorithm of Artificial Bee Colony and Fuzzy Logic Controller

Islam, Madani; Rahman, Md. Rizwanur (IUT, MCE, 2016-11-20)

A hybrid Artificial Bee Colony (HABC) algorithm is proposed based on Fuzzy Inference System for solving fuzzy flexible real life optimisation problem. First, the Fuzzy Logic Control provides multiple parameters to an output ...

Now showing items 1-20 of 22

Search IUT Repository

Advanced Search

Browse

All of IUT Repository
This Collection
- By Issue Date
- Authors
- Titles
- Subjects

Browsing 2016 by Issue Date

Browsing 2016 by Issue Date

Search IUT Repository

Browse

All of IUT Repository

This Collection

My Account