• A brief review of phase change materials and CFD study of thermal management technique for electronic cooling using phase change material (PCM) 

  Khan, Basit; khan, Muhammad Wasim; Almojamer, Momen; Khan, Muhammad Asif Nawaz (Department of Mechanical and Production Engineering, 2021-03-30)

  In this project two different studies were performed, coupled with the review study a numerical study of (2D/3D) transient numerical simulation of a phase change material (PCM) based finned heat sink were performed to ...
• Performance evaluation of wave-carpet in wave energy extraction at different coastal regions: an analytical approach 

  Miskati, Sajia; Farin, Farhana Mumtahin (Department of Mechanical and Production Engineering, 2021-03-30)

  Globally, muddy seafloors have been reported to extract a significant percentage of energy in wave that interacts at different wavelengths. Since mud is capable of taking so much energy out of ocean waves, the researchers ...
• Studying the effect of various contact materials in perovskite/silicon tandem solar cell 

  Shabnam, Shamaita (Department of Mechanical and Production Engineering, 2021-03-30)

  In the last decade, Perovskite based solar cells have seen massive enhancement, as opposed to conventional silicon (Si) based solar cells. As a result, its research has attracted a lot of attention in recent times. The ...
• Study of the Effect of Stacking Sequence on the Tensile and Flexural Behaviour of Carbon/Jute Epoxy Composite Materials: Experimental and Numerical/FE Analysis 

  Mohaimen, Teena; Anjum, Hakim Dina; Haque, Md. Enamul; Serajee, Mokid Mohammad Shelley (Department of Mechanical and Production Engineering, 2021-03-30)

  Currently, there is an increasing trend of utilizing composite materials in various sectors of engineering and technology, particularly aerospace and industrial application, for their exceptional mechanical and thermal ...
• Design and analysis of a compressed air vehicle 

  Shatat, Khalil I A; Alawawda, Amro A A; Alqedra, Sohaib O A; Haniyeh, Hassn A. H.; Abukashef, Abdallah N M; Alfarra, Said A B (Department of Mechanical and Production Engineering, 2021-03-30)
• Conducting a heat flow study in a vessel with the presence of natural convection and phase change material (PCM) 

  Hassan, Ahmad Muntar (Department of Mechanical and Production Engineering, 2021-03-30)

  Experiments on the liquid and convectional circulator heat transfer and cooling in a rectangular heat storage tank with natural circulation As a phase change material 0.1 to ten , paraffin is used (PCM). The effect of ...
• Optimization of Micro EDM Process Using Multi Objective Grasshopper Optimization Algorithm (MOGOA) 

  Sakib, Mohmmad Shadman (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2021-03-30)

  The complex cross sectional micro-operation entails precise and stable micro machining processes. Localized electrochemical deposition in micro EDM operation is an inexpensive meticulous machining approach which can ...
• ‘Performance analysis of a geothermal power plant. Case study: Comoros 

  Imamou, Abdoul-Enziz; Moustapha, Mohamadou; Yaya, Mounjouompou (Department of Mechanical and Production Engineering, 2021-03-30)

  The Khathala geothermal field in the Grande Comoros is under development. We propose design of a double flash geothermal power plant, which has a geofluid temperature of 2500 C. The performance analysis of this double ...
• Assessment of Biogas Potential at IUT from Cafeteria Waste 

  Sayed, Abu; Islam, Khirul; Ali, Md. Hasan; Islam, Md. Shafiul (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur-1704, Bangladesh, 2021-03-30)

  Biogas is a source of clean energy and one kind of renewable energy resource which has highly influence in waste management. Anaerobic digestion is used in formation of biogas from different organic materials and it makes ...
• Improvement of heat transfer in helical HX with multiple-head ribbed using water-based nanofluids 

  Hasan, Md. Jahid (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)

  This study shows the comparison between the helical and straight tube heat exchangers with multiple-head ribbed geometries. A computational fluid dynamics model with constant wall temperature condition was developed for ...
• Heat transfer enhancement using different baffle Spacing arrangement 

  Rahman, Md. Muhibur (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)

  To enhance the heat transfer rate the feature of a shell and tube heat exchanger was developed by considering the baffle spacing and baffle cut.The research in this project was carried by manual calculations and was performed ...
• Waste to Energy : Potential of using activated carbon and rice husk ash in primary cells 

  Hossain, Arman; Maroof, Irteza; Mahmud, Md. Fahim (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)

  Rapid growth of population has brought up some serious concerns, such as waste management and excessive use of fossil fuels causing pollution and negative impact on climate change. A large portion of the waste is organic ...
• Vibration Analysis of Rotary Drill Rig and Modification Using Absorber Technique 

  Sadeque, Sumaiya Binta; Rahan, Md. Asif (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)

  Rotary drill rig being an essential tool in construction engineering, reducing its vibration became necessary due to avoiding any kind of fracture or failure. With the depth of hole getting increased, the vibration becomes ...
• Vibration Analysis of Multi-Story Structures 

  Anam, S.M. Nazrul; Fahim, Abid Md. (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)

  To determine the dynamic characteristics and properties of an object, Modal analysis, and Harmonic response analysis both are quite essential tools. Natural frequency is a significant dynamic parameter as every structure ...
• Thermodynamic Analysis of Cascade Refrigeration System for Low Temperature Applications 

  Faruque, Md Walid; Nabil, Mahdi Hafiz (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)

  In recent years, concern about global warming and ozone layer depletion has been growing. Increasing attention is being given to refrigerants used in refrigeration and air-conditioning systems as they have a signi cant ...
• Techno-Economic and Environmental Feasibility Analysis of Solar water Heating System for a Textile Industry In Bangladesh 

  Rahman, Md. Ashiqur; Salahuddin, R.R.M.; Shoieb (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)

  Considering the energy crisis and environmental concerns, green energy technologies are being focused to harness energy from every available source. Extraction of thermal energy using solar collector is one such technology ...
• Study of the Applicability of Chemical Precipitation and Electrocoagulation Method for Chromium Recovery in CETP at Savar Leather Industrial Park 

  Rahman, Sazedur; Karim, Tasdee Al; Khan, Munabbih Hasan Nadid (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)

  When we visited tanneries at Savar Tannery Industrial Estate in order to gain a deeper understanding of the leather tanning industry of Bangladesh, we realized that the lack of environmental compliance certification is ...
• Room Acoustic Parameters of an Auditorium using Ray Tracing Method 

  Antar, Abrar MD Mubashshir; Maruf, Md. Mesbahul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)

  Sound quality is important for concert halls, seminar room even in room of house too. Ray acoustic is used in simulating the high frequency limit when the wavelengths is smaller than the geometrical features. The ray ...
• Rice Husk Ash Concrete: Study with Experimental and Theoretical result of Compressive Strength and Other Characteristics 

  Uday, Sultan Ul Iffat; Rahman, Ishfaqur (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)

  This book presents a study on the development of the physical properties of Portland cement by using rice husk ash (RHA) as a supplementary material instead of cement, where RHA from the local paddy milling industry in ...
• Performance Comparison of Microchannel Heat Sink using Nano-Liquid-Metal-Fluid Coolant 

  Khan, Yasin; Sarowar, Md Tanbir; Mobarrart, Mahir (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)

  Augmentation of heat transfer from compact areas is a growing concern for many researchers for quite a long time. The search for ultimate cooling solutions is one of the key aspects of transforming different micro-electr ...

View more