Browsing 2021 by Title

Browsing 2021 by Title

Sort by: Order: Results:

  • Optimization of Micro EDM Process Using Multi Objective Grasshopper Optimization Algorithm (MOGOA) 
    Sakib, Mohmmad Shadman (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2021-03-30)
    The complex cross sectional micro-operation entails precise and stable micro machining processes. Localized electrochemical deposition in micro EDM operation is an inexpensive meticulous machining approach which can ...
  • Optimization Processes and Analysis of Impact on Productivity 
    Hassan, Abid; Islam, Md. Shihabul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    Optimization in industrial systems is crucial for the competitiveness of any industry in a competitive economy. A well optimized process can ensure most effective utilization of the limited resources, prove to be cost-effective ...
  • Optimized Design of a PTC Based Power Plant in Saint Martin’s Island 
    Khairuzzaman, Md.; Raihanul Islam, Md.; Maheer Asef, S.M. (Department of Mechanical and Production Engineering, 2021-03-30)
    Solar energy is one of the key renewable energy sources of the globe and can be converted into power by using different technologies and approaching various methodologies. As a remote island and being disconnected from the ...
  • Optimized Design of an Off-Grid PTC Based Power Plant in Saint Martin’s Island 
    Khairuzzaman, Md.; Islam, Md. Raihanul; Asef, S.M. Maheer (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    Solar energy is one of the key renewable energy sources of the globe and can be converted into power by using different technologies and approaching various methodologies. As a remote island and being disconnected from the ...
  • ‘Performance analysis of a geothermal power plant. Case study: Comoros 
    Imamou, Abdoul-Enziz; Moustapha, Mohamadou; Yaya, Mounjouompou (Department of Mechanical and Production Engineering, 2021-03-30)
    The Khathala geothermal field in the Grande Comoros is under development. We propose design of a double flash geothermal power plant, which has a geofluid temperature of 2500 C. The performance analysis of this double ...
  • Performance Comparison of Microchannel Heat Sink using Nano-Liquid-Metal-Fluid Coolant 
    Khan, Yasin; Sarowar, Md Tanbir; Mobarrart, Mahir (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    Augmentation of heat transfer from compact areas is a growing concern for many researchers for quite a long time. The search for ultimate cooling solutions is one of the key aspects of transforming different micro-electr ...
  • Performance evaluation of wave-carpet in wave energy extraction at different coastal regions: an analytical approach 
    Miskati, Sajia; Farin, Farhana Mumtahin (Department of Mechanical and Production Engineering, 2021-03-30)
    Globally, muddy seafloors have been reported to extract a significant percentage of energy in wave that interacts at different wavelengths. Since mud is capable of taking so much energy out of ocean waves, the researchers ...
  • Pneumatically Operated Push on Capping System 
    Imran, Tushar (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    Automation is constantly making significant impact on many industries other than manufacturing. Automation has been taking over the manual operations that have been carried out in the industries for centuries. By reducing ...
  • Remote Controlled Lawn Mower 
    Abdi, Abshir Hassan Mohamud; Elsadig, Ayman; Ali, Abubakar Isak; Ali, Abdullah Mabkhot; Khawari, Ahmad Shuaib (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    The remote-controlled solar-powered lawnmower has been developed to reduce the amount of work required of humans in trimming the lawn. Due to the increased availability of sophisticated equipment, our work has become more ...
  • A review study on vortex generators 
    Tasnim, Nafisa; Anjum, M Raseed (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-11-15)
    This paper presents a review on the heat transfer increase and reduction in pressure drop for compact heat exchangers (CHXs) by using protrusion of surfaces in the form of surfaces in the form of vortex generators (VGs). ...
  • Rice Husk Ash Concrete: Study with Experimental and Theoretical result of Compressive Strength and Other Characteristics 
    Uday, Sultan Ul Iffat; Rahman, Ishfaqur (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    This book presents a study on the development of the physical properties of Portland cement by using rice husk ash (RHA) as a supplementary material instead of cement, where RHA from the local paddy milling industry in ...
  • Room Acoustic Parameters of an Auditorium using Ray Tracing Method 
    Antar, Abrar MD Mubashshir; Maruf, Md. Mesbahul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    Sound quality is important for concert halls, seminar room even in room of house too. Ray acoustic is used in simulating the high frequency limit when the wavelengths is smaller than the geometrical features. The ray ...
  • Study of Nanofluid Based Direct Absorption Solar Collector 
    Islam, Touhid; Antik, Asif Rahman; Alam, Mir Karim Ebne (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    As technology advances finding new sources of energy is getting more and more importance. Solar energy is the most significant source of renewable energy hence researches focus on using the most of it. Solar collectors are ...
  • Study of the Applicability of Chemical Precipitation and Electrocoagulation Method for Chromium Recovery in CETP at Savar Leather Industrial Park 
    Rahman, Sazedur; Karim, Tasdee Al; Khan, Munabbih Hasan Nadid (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    When we visited tanneries at Savar Tannery Industrial Estate in order to gain a deeper understanding of the leather tanning industry of Bangladesh, we realized that the lack of environmental compliance certification is ...
  • Study of the Effect of Stacking Sequence on the Tensile and Flexural Behaviour of Carbon/Jute Epoxy Composite Materials: Experimental and Numerical/FE Analysis 
    Mohaimen, Teena; Anjum, Hakim Dina; Haque, Md. Enamul; Serajee, Mokid Mohammad Shelley (Department of Mechanical and Production Engineering, 2021-03-30)
    Currently, there is an increasing trend of utilizing composite materials in various sectors of engineering and technology, particularly aerospace and industrial application, for their exceptional mechanical and thermal ...
  • Studying the effect of various contact materials in perovskite/silicon tandem solar cell 
    Shabnam, Shamaita (Department of Mechanical and Production Engineering, 2021-03-30)
    In the last decade, Perovskite based solar cells have seen massive enhancement, as opposed to conventional silicon (Si) based solar cells. As a result, its research has attracted a lot of attention in recent times. The ...
  • Techno-Economic and Environmental Feasibility Analysis of Solar water Heating System for a Textile Industry In Bangladesh 
    Rahman, Md. Ashiqur; Salahuddin, R.R.M.; Shoieb (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    Considering the energy crisis and environmental concerns, green energy technologies are being focused to harness energy from every available source. Extraction of thermal energy using solar collector is one such technology ...
  • Techno-economic and Feasibility Analysis of a Thermo-chemical Waste to Energy Conversion Technology from the Perspective of Dhaka City, Bangladesh 
    Hossain, Mohammad Masrur; Inan, Md. Navid (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    As a consequence of dynamic growth in its economy, Bangladesh has seen rapid urbanization in recent years. Dhaka, the capital of Bangladesh, serves as the economic, cultural, and educational center. Unfortunately, Dhaka ...
  • Thermodynamic Analysis of Cascade Refrigeration System for Low Temperature Applications 
    Faruque, Md Walid; Nabil, Mahdi Hafiz (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    In recent years, concern about global warming and ozone layer depletion has been growing. Increasing attention is being given to refrigerants used in refrigeration and air-conditioning systems as they have a signi cant ...
  • Vibration Analysis of Multi-Story Structures 
    Anam, S.M. Nazrul; Fahim, Abid Md. (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    To determine the dynamic characteristics and properties of an object, Modal analysis, and Harmonic response analysis both are quite essential tools. Natural frequency is a significant dynamic parameter as every structure ...

Search IUT Repository


Advanced Search

Browse

My Account