Browsing 2021 by Issue Date

Browsing 2021 by Issue Date

Sort by: Order: Results:

  • Experimental and numerical modelling of break water overtopping for plain, converging and stairs slope 
    Ahmed, Niyaz Afnan; Tahsin, Maysha (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    In recent years, emphasis has been given on converting wave energies in a stable form to protect coastal areas from erosion. Wave energy has grown to develop the reputation of being a major and promising energy resource ...
  • Modelling of NOx and SOx emission: A CFD case study in a small-scale furnace 
    Noor, Faria; Sarwar, Rezwana; Khan, Musarrat (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    A CFD case study was done to learn the impact of Flue Gas Recirculation in a horizontal axis small scale furnace. Flue Gas Recirculation was performed to seehow the emissions are affected with a change in recirculation ...
  • Pneumatically Operated Push on Capping System 
    Imran, Tushar (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    Automation is constantly making significant impact on many industries other than manufacturing. Automation has been taking over the manual operations that have been carried out in the industries for centuries. By reducing ...
  • Remote Controlled Lawn Mower 
    Abdi, Abshir Hassan Mohamud; Elsadig, Ayman; Ali, Abubakar Isak; Ali, Abdullah Mabkhot; Khawari, Ahmad Shuaib (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    The remote-controlled solar-powered lawnmower has been developed to reduce the amount of work required of humans in trimming the lawn. Due to the increased availability of sophisticated equipment, our work has become more ...
  • Techno-economic and Feasibility Analysis of a Thermo-chemical Waste to Energy Conversion Technology from the Perspective of Dhaka City, Bangladesh 
    Hossain, Mohammad Masrur; Inan, Md. Navid (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    As a consequence of dynamic growth in its economy, Bangladesh has seen rapid urbanization in recent years. Dhaka, the capital of Bangladesh, serves as the economic, cultural, and educational center. Unfortunately, Dhaka ...
  • Well-to-Wheel Life Cycle Analysis of Liquefied Petroleum Gas 
    Eva, Ishrat Jahan; Mahi, Afrin; Saharier, Fahim (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    Over the past few decades climate has been changed drastically and it has become a crying need to control greenhouse gas emissions for the gas and oil industries. So, it is important to know the impacts on the environment ...
  • Experimental study on acoustic energy harvesting using single and double PZT film configuration in Helmholtz resonator 
    Shan, A.N.M Nihaj Uddin; Mostafa, Md. Zayed; Shohan, Md. Iftekhar Uddin (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    Acoustic energy harvesting has been the main attraction for many researchers because of energy scarcity. Low-frequency energy harvesting is a highly complicated process. However, the physical characteristics of piezoelectric ...
  • Study of Nanofluid Based Direct Absorption Solar Collector 
    Islam, Touhid; Antik, Asif Rahman; Alam, Mir Karim Ebne (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    As technology advances finding new sources of energy is getting more and more importance. Solar energy is the most significant source of renewable energy hence researches focus on using the most of it. Solar collectors are ...
  • Energy analysis of 171 mw combined cycle power plant in Bangladesh 
    Sifat, Syed Musabbir Al; Piash, Mehedi Hasan (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    The Kushiara Combined Cycle Cogeneration Plant is investigated in this research by energy and exergy analyses. Energy analysis using key operating conditions is used to evaluate the basic thermodynamic properties of the ...
  • Ergonomic Intervention for Improving Worker Efficiency: using adjustable workstation in garment industry 
    Tushi, Sadia Sharmin; Tanzih, Jumainah (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
  • Numerical investigation of local scour around different shaped bridge piers using flow 3d software 
    Shahriyar, Md Abid (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
  • Effect of tool geometry ob chip morphology and cutting parameters in turning process by FEM analysis 
    Meem, Rahnum Tahia (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
  • Optimized Design of an Off-Grid PTC Based Power Plant in Saint Martin’s Island 
    Khairuzzaman, Md.; Islam, Md. Raihanul; Asef, S.M. Maheer (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    Solar energy is one of the key renewable energy sources of the globe and can be converted into power by using different technologies and approaching various methodologies. As a remote island and being disconnected from the ...
  • Analysis of Bimorph Piezoelectric Energy Harvester Attached With a Cantilever Beam Under Excitation 
    Alam, Syed Sifat; Rhythm, Ahnaf Sharaf (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    In this thesis work a cantilever structure based bimorph piezoelectric energy harvester have been designed and analyzed using lead zirconium titanate (PZT 5A) as piezoelectric material and steel as the elastic substrate ...
  • Improvement of heat transfer in helical HX with multiple-head ribbed using water-based nanofluids 
    Hasan, Md. Jahid (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    This study shows the comparison between the helical and straight tube heat exchangers with multiple-head ribbed geometries. A computational fluid dynamics model with constant wall temperature condition was developed for ...
  • Analysis & Comparative Study on Different Cooling Systems of Motorbike Engines and Implementation of Thermoelectric Generator (TEG) on the Exhaust System 
    Himel, Ashif Ahmmed; Hussain, Md Riasat; Sadi, Ahnaf (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    For a smooth running of the engine as well as to maintain an optimum performance, the engine needs to be cooled down. With the number of motorbikes increasing day by day in Bangladesh, finding an optimum cooling system for ...
  • Optimized Design of a PTC Based Power Plant in Saint Martin’s Island 
    Khairuzzaman, Md.; Raihanul Islam, Md.; Maheer Asef, S.M. (Department of Mechanical and Production Engineering, 2021-03-30)
    Solar energy is one of the key renewable energy sources of the globe and can be converted into power by using different technologies and approaching various methodologies. As a remote island and being disconnected from the ...
  • Analysis of Different types of cracks on Beams and Plates 
    Shajid, Soad; Sajol, Sazzadul Islam (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    Beam and plates in existence of crack is vulnerable to failure reckoning on the different mode of vibration. The natural frequency of the beams and plates and the superposition of periodic force acting on beams and plates ...
  • Effect of Tool Geometry on Chip Morphology and Cutting Parameters in Turning Process by FEM Analysis 
    Meem, Rahnum Tahia (Department of Mechanical and Production Engineering, 2021-03-30)
    The purpose of this study is to analyze various parameters like temperature, pressure, max shear stress etc while keeping two parameters constant
  • Numerical Prospect of Ocean Wave Energy Harvesting Using Wells Turbine in Saint Martin Island, Bangladesh 
    Tawkir, Kazi; Rahman, Syed Ashrafur (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)

Search IUT Repository


Advanced Search

Browse

My Account