IUT Repository Home
→
Mechanical and Production Engineering (MPE)
→
Thesis
→
Undergraduate
→
2021
→
Browsing 2021 by Title

Browsing 2021 by Title

Now showing items 1-20 of 46

Analysis & Comparative Study on Different Cooling Systems of Motorbike Engines and Implementation of Thermoelectric Generator (TEG) on the Exhaust System

Himel, Ashif Ahmmed; Hussain, Md Riasat; Sadi, Ahnaf (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)

For a smooth running of the engine as well as to maintain an optimum performance, the engine needs to be cooled down. With the number of motorbikes increasing day by day in Bangladesh, finding an optimum cooling system for ...
Analysis of Bimorph Piezoelectric Energy Harvester Attached With a Cantilever Beam Under Excitation

Alam, Syed Sifat; Rhythm, Ahnaf Sharaf (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)

In this thesis work a cantilever structure based bimorph piezoelectric energy harvester have been designed and analyzed using lead zirconium titanate (PZT 5A) as piezoelectric material and steel as the elastic substrate ...
Analysis of Different types of cracks on Beams and Plates

Shajid, Soad; Sajol, Sazzadul Islam (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)

Beam and plates in existence of crack is vulnerable to failure reckoning on the different mode of vibration. The natural frequency of the beams and plates and the superposition of periodic force acting on beams and plates ...
Assessment of Biogas Potential at IUT from Cafeteria Waste

Sayed, Abu; Islam, Khirul; Ali, Md. Hasan; Islam, Md. Shafiul (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur-1704, Bangladesh, 2021-03-30)

Biogas is a source of clean energy and one kind of renewable energy resource which has highly influence in waste management. Anaerobic digestion is used in formation of biogas from different organic materials and it makes ...
Assessment of Quality Management System and Intervention of Lean Six Sigma Tools in a Ready Made Garments (RMG) Factory

Nafiz, Afsan; Aziz, Md. Abdul (Department of Mechanical and Production Engineering, 2021-03-30)

Quality Management Systems have become an integral part of modern manufacturing processes. Lean Manufacturing approach, Six Sigma Methodologies and the various tools of Lean Six Sigma approaches are increasingly being ...
A brief review of phase change materials and CFD study of thermal management technique for electronic cooling using phase change material (PCM)

Khan, Basit; khan, Muhammad Wasim; Almojamer, Momen; Khan, Muhammad Asif Nawaz (Department of Mechanical and Production Engineering, 2021-03-30)

In this project two different studies were performed, coupled with the review study a numerical study of (2D/3D) transient numerical simulation of a phase change material (PCM) based finned heat sink were performed to ...
Concept of Eco Scrubbing Technology: A CFD case study in small furnace

Zidan, Md. Abidur Rahman; Shihab, S.M. Samiul Bashir; Suprova, Nabila Tabassum; Aktab, Mohd. Mahir (Department of Civil and Environmental Engineering (CEE), Islamic University of Technology (IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)

The substantial rise in CO2 percentage in the atmosphere owing to the increasing demand in electrical power is alarming and needs to be addressed. Coal continues to be a key fuel in global energy systems, accounting for ...
Conducting a heat flow study in a vessel with the presence of natural convection and phase change material (PCM)

Hassan, Ahmad Muntar (Department of Mechanical and Production Engineering, 2021-03-30)

Experiments on the liquid and convectional circulator heat transfer and cooling in a rectangular heat storage tank with natural circulation As a phase change material 0.1 to ten , paraffin is used (PCM). The effect of ...
Design and analysis of a compressed air vehicle

Shatat, Khalil I A; Alawawda, Amro A A; Alqedra, Sohaib O A; Haniyeh, Hassn A. H.; Abukashef, Abdallah N M; Alfarra, Said A B (Department of Mechanical and Production Engineering, 2021-03-30)
Design and Analysis of an Eddy Current Metal Separator in a Single Stream Solid Waste Management System

Al Naqib, Shakh Fahad (Department of Mechanical and Production Engineering, 2021-03-30)

Recovery and recycling of metal items from waste sources is very important in economic and environmental aspects. The purpose of this study is to design and simulate and eddy-current metal separator which is used industrially ...
Effect of tool geometry ob chip morphology and cutting parameters in turning process by FEM analysis

Meem, Rahnum Tahia (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
Effect of Tool Geometry on Chip Morphology and Cutting Parameters in Turning Process by FEM Analysis

Meem, Rahnum Tahia (Department of Mechanical and Production Engineering, 2021-03-30)

The purpose of this study is to analyze various parameters like temperature, pressure, max shear stress etc while keeping two parameters constant
Energy analysis of 171 mw combined cycle power plant in Bangladesh

Sifat, Syed Musabbir Al; Piash, Mehedi Hasan (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)

The Kushiara Combined Cycle Cogeneration Plant is investigated in this research by energy and exergy analyses. Energy analysis using key operating conditions is used to evaluate the basic thermodynamic properties of the ...
Ergonomic Intervention for Improving Worker Efficiency: using adjustable workstation in garment industry

Tushi, Sadia Sharmin; Tanzih, Jumainah (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
Experimental and numerical modelling of break water overtopping for plain, converging and stairs slope

Ahmed, Niyaz Afnan; Tahsin, Maysha (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)

In recent years, emphasis has been given on converting wave energies in a stable form to protect coastal areas from erosion. Wave energy has grown to develop the reputation of being a major and promising energy resource ...
Experimental study on acoustic energy harvesting using single and double PZT film configuration in Helmholtz resonator

Shan, A.N.M Nihaj Uddin; Mostafa, Md. Zayed; Shohan, Md. Iftekhar Uddin (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)

Acoustic energy harvesting has been the main attraction for many researchers because of energy scarcity. Low-frequency energy harvesting is a highly complicated process. However, the physical characteristics of piezoelectric ...
Heat transfer enhancement using different baffle Spacing arrangement

Rahman, Md. Muhibur (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)

To enhance the heat transfer rate the feature of a shell and tube heat exchanger was developed by considering the baffle spacing and baffle cut.The research in this project was carried by manual calculations and was performed ...
Improvement of heat transfer in helical HX with multiple-head ribbed using water-based nanofluids

Hasan, Md. Jahid (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)

This study shows the comparison between the helical and straight tube heat exchangers with multiple-head ribbed geometries. A computational fluid dynamics model with constant wall temperature condition was developed for ...
Improvement of heat transfer in helical HX with multiple-head ribbed using water-based nanofluids

Hasan, Md. Jahid (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)

This study shows the comparison between the helical and straight tube heat exchangers with multiple-head ribbed geometries. A computational fluid dynamics model with constant wall temperature condition was developed for ...
Modelling of NOx and SOx emission: A CFD case study in a small-scale furnace

Noor, Faria; Sarwar, Rezwana; Khan, Musarrat (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)

A CFD case study was done to learn the impact of Flue Gas Recirculation in a horizontal axis small scale furnace. Flue Gas Recirculation was performed to seehow the emissions are affected with a change in recirculation ...

Now showing items 1-20 of 46

Search IUT Repository

Advanced Search

Browse

All of IUT Repository
This Collection
- By Issue Date
- Authors
- Titles
- Subjects

Browsing 2021 by Title

Browsing 2021 by Title

Search IUT Repository

Browse

All of IUT Repository

This Collection

My Account