• Comparative Design Analysis of Motorcycle Braking Systems to Decide the Most Appropriate System According to The Traffic Context of Bangladesh 

  Mahtab, Md.Azmain; Mahee, Nafiz Fuad; Shikder, Md.Nahian (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)

  The road accident rates in Bangladesh has increased by 42% since last 4 decades. Apart from all other socio-economic reasons, lack of appropriate usage of motorcycle braking system is one of the obvious reasons in this ...
• Study and comparison of mechanical properties between scrap recycled steel and ship recycled steel. 

  Al-Noor, M. Sadik; Shuvo, Safayet Hossen; Khan, Tausif (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)

  Steel is the most recycled metal in the world and it is impossible to imagine life without steel. It must be recycled maintaining its proper quality and contributing to economy. Scrap recycling and ship recycling are two ...
• A CFD Study on Comparison of Heat Transfer Performance of Water based Graphene Nanoplatelets Nanofluids and Multiwalled Carbon Nanotubes Nanofluids in a Concentric Tube Heat Exchanger 

  Hoq, MD Zahinul (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)

  For the next generation of nanofluids, carbon nanomaterials are of tremendous interest. CnT and GnP, in particular, are extremely thermally conductive, and their usage in heat transfer nanofluids is a significant field ...
• Power Generation from Rice Husk 

  Anando, Ahmed Imtiaz (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-31)

  The alarming rate at which the deposit of non-renewable or fossil energy resources are depleting around the whole world has been nudging us in the direction of green energy for quite a long time. Considering the upcoming ...
• CFD Modelling of H-Darrieus Vertical Axis Wind Turbine 

  Tonni, Morium Mannan (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-31)

  With the progress of time, as fossil fuel is being exhausted, renewable energy resources are getting more attention for their promising impact on the environment and its capability to replenish and sustainability. Wind ...
• Vibration and Stress Analysis of Multistory Steel Structure 

  Alvy, Tamzeed Ahmed (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-31)

  Modal parameters of structures and machines is crucial to determine the dynamic behavior during operation stages. A necessary step is to determine the dynamic characteristics and optimize the structure at its design phase ...
• Changes in future rainfall extremes over northwest Bangladesh using multi-model ensemble 

  Abedin, MD Minhajul (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-31)

  Bangladesh is rich in nearly every form of natural resource. Underground water and rainfall are critical parameters in civil and mechanical engineering. The impacts of climate change on precipitation across Bangladesh's ...
• Design and off-Design Performance Analysis of a Zigzag Channeled Precooler For SCO2 Recompression Cycle Integrated with CSP 

  Ahmed, Md. Maruf (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-31)

  The design and performance analysis of Printed Circuit Heat Exchanger (PCHE) as pre-cooler is being recent research trend as the researches on recuperator has already been saturated. The improbable fluctuating properties ...
• Numerical Investigation of a Hybrid Photovoltaic Thermal PVT Module 

  Chowdhury, Taspia Shawkat; Mita, Mita Noor Hasan; Mohsin, Fatima Tasneem (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-31)

  Over 173,000 terawatts of solar radiation continuously strike the Earth’s atmosphere however, most of this energy is reflected or absorbed and is lost due to insufficient space and technology required to harness the ...
• Thermal and Hydraulic Performance Comparison of Carbon Based and Metal Based Nano fluids in Flat Plate Solar Collector: A CFD Analysis 

  Nuhash, Mashrur Muntasir; Alam, Md. Ibthisum; Zihad, Ananta (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-31)

  The constant rise in global temperature and the need to reduce fossil fuel consumption has made renewable energy sources desirable, especially solar energy systems. Flat plate solar collector (FPSC) is one of the most ...
• Data-Driven-Approach-to-Construct-Flow-Field-of-A-2d-Airfoil 

  Chowdhury, Nahiyan; Hossain, Fahmid; Mahi-al-rashid, Abrar (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-06-10)

  Machine learning is quickly becoming a significant scientific computer tool, with enormous potential to broaden the field of computational fluid dynamics. Various research has been conducted in the recent past which ...
• Thermodynamic Investigation of Combined Cycles And Polygeneration Systems With An Emphasis On Supercritical Carbon Dioxide Power Cycles 

  Bishal, Salim Sadman; Faysal, Dewan Fahim (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-31)

  Because of the tremendous growth in global population and economic activity, as well as growing environmental concerns, efficient energy use will be critical in creating the future energy landscape. Reduced waste heat ...
• Numerical Simulation on Thermal Analysis of Single Borehole U Tube 

  Ahmad, Ahmad Tijjani; Kamara, Mohamed Alie (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-31)

  The most vital element in evaluating the thermal efficiency of a geothermal coupled heat pump system is the thermal layout of a borehole. It necessitates an understanding of the borehole's U-tube configuration and design. ...
• Design and Fabrication of a Fire Fighting Drone 

  Mizan, Chowdhury Hassan Bin; Islam, Md Anwarul (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)

  Fire is a disaster that can occur from different natural causes and from manmade causes. Generally, natural fires are the wildfires that occur due to global warming caused by human beings. Generally, the manmade causes ...
• Effect of Mechanical Vibrations In Sand Casting of Aluminium Alloy Using Organic Binders 

  Mahmud, Safayet; Rownak, Ragib (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)

  This paper represents a systematic finite element analysis to evaluate the various mechanical vibration impacts on sand mold casting during aluminum alloy cooling. In general, the mold materials govern the molten metal ...
• Design and Analysis of Heat Sink Configurations for Passive Cooling of Solar Panels 

  Ahmed, Ishtiaq; Farhin, Hossain Azmain; Heme, Saziea Afrin (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)

  The reduction in efficiency of polycrystalline solar panels at very high operating temperatures demands the implementation of effective cooling solutions to dissipate the excess heat from the photovoltaic (PV) module. ...
• A Machine Learning based assessment of OTEC potential in the Bay of Bengal and it's harvesting approach 

  Rashid, Abir; Nakib, Taher Hasan (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)

  Bangladesh has been steeply growing towards a concerning power demand. The coastal region and nearby islands surrounding the Bay of Bengal barely gets more than half of its required power through conventional power grid ...
• Formulating a Conceptual Framework for Route Planning and Warehouse Design-Operation in the E- Commerce Based Logistics Companies In Bangladesh. 

  Aziz, Md Tawhid; Shahriar, Sk. Tahmid; Faiyaz, F.M. Farhan; Islam, Aseer Nehalul (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)

  Frameworks assist organizations in saving time and increasing the efficiency of their operations by providing a list of all the common process elements found in the majority of businesses that can be used as building blocks. ...
• Design and Analysis of Heat Transfer of a Fully Spiral and Smooth Exhaust Gas Recirculation Cooler in a Diesel Engine. 

  Waqas, Muhammad; Ullah, Hameed; Javed, Usama (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)

  Currently our planet Earth is facing a severe climate change and the natural resources are consumed at a very vast rate, government strategies, technological companies and world organizations are working hard to reduce ...
• Feasibility analysis of CSP Technology coupled with TES system for power generation in industrial plants of Bangladesh 

  Ahmed, Fahim; Mubarrat, Mitin (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh., 2022-05-30)

  Different technologies and approaches to diverse methodology may be used to convert solar energy into electrical power, making it an important renewable energy source across the world. Photovoltaic (PV) conversion and ...

View more