Browsing 2022 by Title

Browsing 2022 by Title

Sort by: Order: Results:

  • Control of Seat Vibration of a Vehicle Due to Bump on Road 
    Rashid, Naqib Sadiq; Ishtyaq, Md. Nuhan (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    This work is focused on the seat suspension system of a vehicle. To control the vibration of the seat suspension in such a way so that it not only safe-guard a rider but also provide high level comfort. With that in mind ...
  • Data-Driven-Approach-to-Construct-Flow-Field-of-A-2d-Airfoil 
    Chowdhury, Nahiyan; Hossain, Fahmid; Mahi-al-rashid, Abrar (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-06-10)
    Machine learning is quickly becoming a significant scientific computer tool, with enormous potential to broaden the field of computational fluid dynamics. Various research has been conducted in the recent past which ...
  • Design & Development of Firefighting Robot in the Scenario of Bangladesh 
    Alam, Shah Hasibul; Mahmud, Rezwan; Raad, Rakin Robbani (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    Firefighting is an essential yet hazardous profession. Technology has now crossed the gap between humans and machines, enabling for a much more effective and efficient firefighting strategy. Robots developed to locate a ...
  • Design and Analysis of A Compressed Air Vehicle 
    Mohamed, Mohamoud; Sadeq, Mohammad; Harir, Kasmal; Adimbo, Ibrahim Zakari (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    Global climate change is the most pressing issue facing the entire globe.Vehicles are one of the primary contributors of pollution. As a result, non-conventional fuels must be substituted for conventional fuels. Compressed ...
  • Design and Analysis of Heat Sink Configurations for Passive Cooling of Solar Panels 
    Ahmed, Ishtiaq; Farhin, Hossain Azmain; Heme, Saziea Afrin (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)
    The reduction in efficiency of polycrystalline solar panels at very high operating temperatures demands the implementation of effective cooling solutions to dissipate the excess heat from the photovoltaic (PV) module. ...
  • Design and Analysis of Heat Transfer of a Fully Spiral and Smooth Exhaust Gas Recirculation Cooler in a Diesel Engine. 
    Waqas, Muhammad; Ullah, Hameed; Javed, Usama (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)
    Currently our planet Earth is facing a severe climate change and the natural resources are consumed at a very vast rate, government strategies, technological companies and world organizations are working hard to reduce ...
  • Design and Fabrication of a Fire Fighting Drone 
    Mizan, Chowdhury Hassan Bin; Islam, Md Anwarul (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)
    Fire is a disaster that can occur from different natural causes and from manmade causes. Generally, natural fires are the wildfires that occur due to global warming caused by human beings. Generally, the manmade causes ...
  • Design and off-Design Performance Analysis of a Zigzag Channeled Precooler For SCO2 Recompression Cycle Integrated with CSP 
    Ahmed, Md. Maruf (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-31)
    The design and performance analysis of Printed Circuit Heat Exchanger (PCHE) as pre-cooler is being recent research trend as the researches on recuperator has already been saturated. The improbable fluctuating properties ...
  • Effect of Mechanical Vibrations In Sand Casting of Aluminium Alloy Using Organic Binders 
    Mahmud, Safayet; Rownak, Ragib (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)
    This paper represents a systematic finite element analysis to evaluate the various mechanical vibration impacts on sand mold casting during aluminum alloy cooling. In general, the mold materials govern the molten metal ...
  • Feasibility analysis of CSP Technology coupled with TES system for power generation in industrial plants of Bangladesh 
    Ahmed, Fahim; Mubarrat, Mitin (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh., 2022-05-30)
    Different technologies and approaches to diverse methodology may be used to convert solar energy into electrical power, making it an important renewable energy source across the world. Photovoltaic (PV) conversion and ...
  • Formulating a Conceptual Framework for Route Planning and Warehouse Design-Operation in the E- Commerce Based Logistics Companies In Bangladesh. 
    Aziz, Md Tawhid; Shahriar, Sk. Tahmid; Faiyaz, F.M. Farhan; Islam, Aseer Nehalul (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)
    Frameworks assist organizations in saving time and increasing the efficiency of their operations by providing a list of all the common process elements found in the majority of businesses that can be used as building blocks. ...
  • A Machine Learning based assessment of OTEC potential in the Bay of Bengal and it's harvesting approach 
    Rashid, Abir; Nakib, Taher Hasan (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)
    Bangladesh has been steeply growing towards a concerning power demand. The coastal region and nearby islands surrounding the Bay of Bengal barely gets more than half of its required power through conventional power grid ...
  • Modal & Fatigue Analysis of Different Blade Profiles of Axial Flow Turbine 
    Rad, Shihabus Sakib; Akram, Md. Saleh (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    The profile shapes of axial turbine blades need to fulfil the requirements of not only aerodynamics but also mechanical criteria. A design requires aerodynamically favorable velocity distribution as well as mechanically ...
  • Molecular Dynamics Simulation of Two Dimensional Materials 
    Hezam, Ahmad Fatehi Ali Mohammed; Haider, A.S.M. Redwan (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-06-06)
    Ultra-thin materials like Graphene and Transition Metal dichalcogenides are a novel class of materials with robust applications in electronic devices. These 2D materials are one of the main driving forces behind the rise ...
  • Nanofluid Implementation in Heat Exchanger Geometries 
    Ahmad, Foyez; Mahmud, Sajjad (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-06-07)
    In recent years, nanotechnology has evolved as an important field that employs sophisticated "green" nanoparticles incorporated in conventional engineering resources. The heat transfer performance of nanofluids is superior ...
  • Numerical Investigation of a Hybrid Photovoltaic Thermal PVT Module 
    Chowdhury, Taspia Shawkat; Mita, Mita Noor Hasan; Mohsin, Fatima Tasneem (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-31)
    Over 173,000 terawatts of solar radiation continuously strike the Earth’s atmosphere however, most of this energy is reflected or absorbed and is lost due to insufficient space and technology required to harness the ...
  • Numerical Simulation on Thermal Analysis of Single Borehole U Tube 
    Ahmad, Ahmad Tijjani; Kamara, Mohamed Alie (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-31)
    The most vital element in evaluating the thermal efficiency of a geothermal coupled heat pump system is the thermal layout of a borehole. It necessitates an understanding of the borehole's U-tube configuration and design. ...
  • Numerical study on thermal performance analysis of radiator: effect of the number of pipes 
    Ousmanou, Yaya; Tchari, Madi Abba (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-06-10)
    The car Radiator is one the most important of its parts which plays a very important role in the heat transfer of the engine. Our study is based on the number of pipes or tubes in a car radiator. By varying the number of ...
  • Photovoltaic Thermoelectric Cooling System For Off-grid Vaccine Refrigerator: An Experimental Study 
    Khan, Nazia Rodoshi; Sharmin, Tasnuva (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    The rapidly rising demand of refrigeration technologies mostly in the fields of refrigeration and air conditioning, medical applications and electronic component cooling resulted in much more energy being produced than ...
  • Power Generation from Rice Husk 
    Anando, Ahmed Imtiaz (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-31)
    The alarming rate at which the deposit of non-renewable or fossil energy resources are depleting around the whole world has been nudging us in the direction of green energy for quite a long time. Considering the upcoming ...

Search IUT Repository


Advanced Search

Browse

My Account