Browsing 2022 by Issue Date

Browsing 2022 by Issue Date

Sort by: Order: Results:

  • Cafeteria Waste to Biogas Plant 
    Mashfy, Mohammad Muhtasim; Farhan, Talat; Sobhan, Abrar; Saagoto, Md Sadatuzzaman (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    Food waste is becoming a major problem in IUT. The best option for controlling food waste and replacing traditional cooking and heating fuel is to convert food waste to biogas energy via anaerobic digestion. In addition, ...
  • Study of Fuel Consumption and GHG Emission of Motorcycles in Dhaka to Offset Pollution by Use of an Alternative Biofuel 
    Anindo, Muhaimin Wasif; Shefat, Md Khaledun Newaz; Abtahi, MD. Mustakim (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    The recent decade has been a prosperous period for Bangladesh's economic growth, which has elevated the country's economic position to developing or emergent. The accelerating expansion of this country's GDP from the Indian ...
  • Design & Development of Firefighting Robot in the Scenario of Bangladesh 
    Alam, Shah Hasibul; Mahmud, Rezwan; Raad, Rakin Robbani (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    Firefighting is an essential yet hazardous profession. Technology has now crossed the gap between humans and machines, enabling for a much more effective and efficient firefighting strategy. Robots developed to locate a ...
  • Modal & Fatigue Analysis of Different Blade Profiles of Axial Flow Turbine 
    Rad, Shihabus Sakib; Akram, Md. Saleh (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    The profile shapes of axial turbine blades need to fulfil the requirements of not only aerodynamics but also mechanical criteria. A design requires aerodynamically favorable velocity distribution as well as mechanically ...
  • Photovoltaic Thermoelectric Cooling System For Off-grid Vaccine Refrigerator: An Experimental Study 
    Khan, Nazia Rodoshi; Sharmin, Tasnuva (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    The rapidly rising demand of refrigeration technologies mostly in the fields of refrigeration and air conditioning, medical applications and electronic component cooling resulted in much more energy being produced than ...
  • Autonomous Path Planning of Unmanned Air Systems Using Computational Methods and Optimization Algorithm 
    Islam, Tausiful; Tanvin, Jahiduzzaman; Hasan, Muhammad Samin (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    In recent years, the use of Unmanned Air Systems (UAS) has become popular in many industries including agriculture, logistics, security agencies and humanitarian missions. An Unmanned Air System consists of a drone or ...
  • Comparative Life Cycle Analysis of Electric and Conventional Vehicle in Bangladesh. 
    Mashiyat, Md Samawat Ahsan; Ahmed, Md. Asif; Atik, Raisul Islam (Department of Business and Technology Management(BTM), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2022-05-30)
    In many parts of the globe, electric cars are being promoted as a means to drastically improve urban air quality while also cutting greenhouse gas emissions. Utilizing a Life Cycle Analysis approach, this study examines ...
  • Control of Seat Vibration of a Vehicle Due to Bump on Road 
    Rashid, Naqib Sadiq; Ishtyaq, Md. Nuhan (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    This work is focused on the seat suspension system of a vehicle. To control the vibration of the seat suspension in such a way so that it not only safe-guard a rider but also provide high level comfort. With that in mind ...
  • Design and Analysis of A Compressed Air Vehicle 
    Mohamed, Mohamoud; Sadeq, Mohammad; Harir, Kasmal; Adimbo, Ibrahim Zakari (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    Global climate change is the most pressing issue facing the entire globe.Vehicles are one of the primary contributors of pollution. As a result, non-conventional fuels must be substituted for conventional fuels. Compressed ...
  • Analysis of different metamaterials based on low frequency sound transmission loss using comsol multiphysics 
    Rahman, S. M. Mustafizur; Zakir, Junayed Bin (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    In this day and age noise reduction is an increasingly relevant and rapidly progressing sector of technology. It is necessary due to the numerous psychological benefits of a relatively quiet atmosphere. In this paper, we ...
  • A Machine Learning based assessment of OTEC potential in the Bay of Bengal and it's harvesting approach 
    Rashid, Abir; Nakib, Taher Hasan (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)
    Bangladesh has been steeply growing towards a concerning power demand. The coastal region and nearby islands surrounding the Bay of Bengal barely gets more than half of its required power through conventional power grid ...
  • Design and Analysis of Heat Sink Configurations for Passive Cooling of Solar Panels 
    Ahmed, Ishtiaq; Farhin, Hossain Azmain; Heme, Saziea Afrin (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)
    The reduction in efficiency of polycrystalline solar panels at very high operating temperatures demands the implementation of effective cooling solutions to dissipate the excess heat from the photovoltaic (PV) module. ...
  • A Review of the Technologies for Wave Energy Conversion 
    Mahatab, Fardin (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    The primary objective of this article is to provide a comprehensive overview of the wave energy extraction techniques currently in use. The overview will describe the potential of wave technologies as well as their ...
  • Design and Fabrication of a Fire Fighting Drone 
    Mizan, Chowdhury Hassan Bin; Islam, Md Anwarul (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)
    Fire is a disaster that can occur from different natural causes and from manmade causes. Generally, natural fires are the wildfires that occur due to global warming caused by human beings. Generally, the manmade causes ...
  • Formulating a Conceptual Framework for Route Planning and Warehouse Design-Operation in the E- Commerce Based Logistics Companies In Bangladesh. 
    Aziz, Md Tawhid; Shahriar, Sk. Tahmid; Faiyaz, F.M. Farhan; Islam, Aseer Nehalul (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)
    Frameworks assist organizations in saving time and increasing the efficiency of their operations by providing a list of all the common process elements found in the majority of businesses that can be used as building blocks. ...
  • Effect of Mechanical Vibrations In Sand Casting of Aluminium Alloy Using Organic Binders 
    Mahmud, Safayet; Rownak, Ragib (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)
    This paper represents a systematic finite element analysis to evaluate the various mechanical vibration impacts on sand mold casting during aluminum alloy cooling. In general, the mold materials govern the molten metal ...
  • Feasibility analysis of CSP Technology coupled with TES system for power generation in industrial plants of Bangladesh 
    Ahmed, Fahim; Mubarrat, Mitin (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh., 2022-05-30)
    Different technologies and approaches to diverse methodology may be used to convert solar energy into electrical power, making it an important renewable energy source across the world. Photovoltaic (PV) conversion and ...
  • Design and Analysis of Heat Transfer of a Fully Spiral and Smooth Exhaust Gas Recirculation Cooler in a Diesel Engine. 
    Waqas, Muhammad; Ullah, Hameed; Javed, Usama (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)
    Currently our planet Earth is facing a severe climate change and the natural resources are consumed at a very vast rate, government strategies, technological companies and world organizations are working hard to reduce ...
  • A CFD Study on Comparison of Heat Transfer Performance of Water based Graphene Nanoplatelets Nanofluids and Multiwalled Carbon Nanotubes Nanofluids in a Concentric Tube Heat Exchanger 
    Hoq, MD Zahinul (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)
    For the next generation of nanofluids, carbon nanomaterials are of tremendous interest. CnT and GnP, in particular, are extremely thermally conductive, and their usage in heat transfer nanofluids is a significant field ...
  • Study and comparison of mechanical properties between scrap recycled steel and ship recycled steel. 
    Al-Noor, M. Sadik; Shuvo, Safayet Hossen; Khan, Tausif (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)
    Steel is the most recycled metal in the world and it is impossible to imagine life without steel. It must be recycled maintaining its proper quality and contributing to economy. Scrap recycling and ship recycling are two ...

Search IUT Repository


Advanced Search

Browse

My Account