Thesis: Recent submissions

  • Low-Cost Triangulation 3D Laser Scanner for Lambertian Surfaces 
    Kushal, Tazim Ridwan Billah; Haque, Md. Shariful; Khan, Shahtab Ahmed (Department of Electrical and Electronic Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh, 2014-11-15)
    The design of a low-cost triangulation 3D laser scanner using off-the-shelf electronics is described. This system has a wide range of applications in 3D modeling, and is particularly useful because of its portability and ...
  • Design and Simulation of a controller compensated Buck Converter 
    Lisheshar, Ibrahim W.; Ahmad, Shabir; Akbar, Niaz; Ahmed, Salahuddin Mohammed (Department of Electrical and Electronic Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh, 2014-11-15)
    DC-DC converters are used in every day electronic devices. Like transformers are to ac power, they can change the state of a dc power from high to low and vice versa. In this thesis, the buck converter is designed for ...
  • Smart Grid Using Renewable Energy 
    Seck, Mamour; Omar, Abdillahi Mohmed (Department of Electrical and Electronic Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh, 2014-11-15)
    Renewable energy resources hold great promise for meeting the energy and development needs of countries throughout the world. This promise is particularly strong for developing countries where many regions have not yet ...
  • Modeling of Frequency Dependent Permittivity of Materials and Simulation of Plasmonic Nanostructures Using FDTD Algorithm 
    Shahriar, Kh. Arif; Joy, Md. Mahamudun Arif; Sohel, Ikramul Hasan (Department of Electrical and Electronic Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh, 2014-11-15)
    Speed of modern digital circuits is limited by the delay caused in electronic interconnects due to distributed RC effect. The diffraction limit of ordinary light waves limits the resolution of optical instruments like ...
  • SPP Propagation Using FDTD Method 
    Khan, Md. Azmot Ullah; Shamim, Md. Hosne Mobarok; Fuad, Faisal Mahmud (Department of Electrical and Electronic Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh, 2014-11-15)
    Now a days Surface Plasmon Polariton (SPP) has become a very attractive field of study for its extraordinary confinement of light at optical frequencies and its ability to overcome the diffraction limit. It is a very ...
  • Performance Analysis of Energy Efficient Cross Layer Approach in WSN & Goodput Analysis in Two Way Relay Network 
    Hossain, Md. Wahid; Rahim, Md. Abdul Ohab; Ahmed, Rifat (Department of Electrical and Electronic Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh, 2014-11-15)
    Survivability is one of the critical issues and the most important research topics in the fields of wireless sensor networks (WSNs). Energy efficiency is one of the determining factors for survivability and lifetime of ...
  • Automatic Lesion Segmentation of Breast Ultrasound Image: An approach towards full automation 
    Mukaddim, Rashid-Al-; Islam, Nafiul; Zaman, Fahim Ahmed (Department of Electrical and Electronic Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh, 2014-11-15)
    Breast cancer is the most common cause of death among patients. One of the main reasons is that the lesion is not identified in proper time to seek medical facility. The situation in Bangladesh is alarming as there is a ...
  • Performance Comparison of Positive-Feedback Match-Line Sensing Schemes in High Speed Ternary Content Addressable Memory (TCAM) 
    Foysal, Md. Atik; Morshed, Syed Muntasir; Anam, Md. Zahidul (Department of Electrical and Electronic Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh, 2014-11-15)
    We survey different schemes in the design of TCAM. A TCAM is a memory that implements the lookup-table function in a single clock cycle using dedicated comparison circuitry. TCAMs are especially popular in network routers ...
  • Modeling and Small Signal Analysis of a Grid Connected Doubly Fed Induction Generator 
    Biswas, Rifat Md. Bakhtear; Islam, Tonmoy; Rabbi, Hasan M. Fazle (Department of Electrical and Electronic Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh, 2014-11-15)
    Wind power, as an alternative to fossil fuels, is plentiful, renewable, widely distributed, clean, produces no greenhouse gas emissions during operation and uses little land. Unlike other sources of electricity that ...
  • Study on Vehicular Ad-Hoc Delay Tolerant Networking for Infrastructure-Less Areas 
    Saniad, Md.; Sayem, S.M.A.; Zahin, Abrar (Department of Electrical and Electronic Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh, 2014-11-15)
    Generally in traditional networks suppose the existence of some path between endpoints. Today, however, new applications, environments and types of devices are challenging these assumptions. In Delay Tolerant Networks ...
  • Sleep Analysis by Using Minimum EEG Lead System 
    Khan, Sifat Shahriar; Ahmed, Ashfak Uddin; Hasan, Rashedul (Department of Electrical and Electronic Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh, 2014-11-15)
    Each and every day, thousands of people lose their lives in accidents occurring in roads and highways all over the world. Although there are many factors behind these collisions, one of the most significant reasons is ...
  • Dynamic Stability Study of FSIG based Hybrid Power Generation 
    Zaman, Shafi Md. Kawsar; Chowdhury, Muhammad Rashedul Alam; Hassan, Md. Kamrul (Department of Electrical and Electronic Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh, 2014-11-15)
    As a result of increasing environmental concern, increasing amounts of electricity are generated from renewable sources. One way of generating electricity from renewable sources is to use wind turbines. A tendency to ...
  • Performance Comparison of Charge-Shared Matchline Sensing Schemes in High-Speed Ternary Content Addressable Memory (TCAM) 
    Kadir, Raqqib Bin; Haque, Muntasim-Ul-; Anwar, Ahmed Selim (Department of Electrical and Electronic Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh, 2014-10-15)
    Ternary content addressable memory (TCAM) is a memory that offers high speed table look-up capability for applications such as internet protocol (IP) packet forwarding and classification in network routers. A performance ...
  • Design and Analysis of Tracking Device for Wireless Embedded System 
    Uddin, Md.Tausif; Rahman, Md.Fahim; Farhad, Saleh; Zaki, Maisra Abdul Azim (Department of Electrical and Electronic Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh, 2014-11-15)
    A large number of children are being kidnapped on a regular basis which is a matter of great anxiety for the parents. Then again a huge number of people who are sufferers of Alzheimer disease or mental degradation are ...
  • Smart and Energy Efficient Wireless Embedded Home Automation System 
    Rashid, Mohammad Bazlur; Sayeed, Joheb Muhammad Tanzeer; Shakil, MD. Wahidur Rahman (Department of Electrical and Electronic Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh, 2014-11-15)
    Automation is the technique, method or system of operating or controlling a process by highly automatic means, as by electronic devices, reducing human intervention to a minimum. An automated home appears "intelligent" ...
  • Modeling and Stability Analysis of SMIB system incorporating a VSC based HVDC link 
    Karim, Chowdhury Andalib Bin; Hossain, Muhammad Rizvi; Adham, Md. Ibrahim (Department of Electrical and Electronic Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh, 2014-11-15)
    In recent years, power demand has increased substantially while the expansion of power generation and transmission facilities have been severely limited due to limited resources and environmental restrictions. As a ...
  • Modeling and Simulation of Photovoltaic Component of a Power System 
    Mbipeh, Chafah Zachary; Legrand, Njoya Youssof; Abu-Shibh, Nasr Abdullah; Ahmed, Saddam Ahmmed (Department of Electrical and Electronic Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh, 2014-11-15)
    This project presents a modified step-by-step procedure for the simulation of photovoltaic modules with Matlab/ Simulink. One-diode equivalent circuit is employed in order to investigate I-V and P-V characteristics of a ...
  • Load Flow Study on a Standard Grid Substation 
    Zourob, Khaled H.O.; Alnajjar, Omar A.A.; Abdelaziz, Osman Mohamed; Alnajjar, Rafat A.O. (Department of Electrical and Electronic Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh, 2014-11-15)
    Electricity the most common form of energy is the indicator of economic development of a country. The demand of safe and reliable electricity is going up in such a rate that the present grid system cannot deal with the ...
  • Fuzzy Logic Based Speed Control of DC Motor 
    Rahman, Towfique; Shakib, Sadman; Aqib, Safat (Department of Electrical and Electronic Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh, 2014-11-15)
    This Thesis is based on the speed control of DC motors. In the industrial area, rolling mills, chemical process, electric trains, robotic manipulators and the home electric appliances, the necessity of speed control of ...
  • Food Quality Control Using an Economical Ph Meter 
    Sadik, Md. Rezwane; Akash, Ashiquzzaman; Mohammad, Sami (Department of Electrical and Electronic Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh, 2014-11-15)
    This project is based on designing an economical pH meter, which is capable of controlling food quality. It would accomplish that through the comparison of the pH values obtained from the food items with the safe pH values ...

Search IUT Repository


Advanced Search

Browse

My Account