Thesis: Recent submissions

  • Single-Phase AC-DC Cascaded Boost- Cûk (CBC) Converter for High Step-up Applications Using Common Part Sharing Method (CPSM) 
    Parash, Md. Nasif Fuad; Habib, Monsur; Mehran, Anagh; Rahman, Ashikur (Department of Electrical and Electronic Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    Due to the rising need of renewable energy the importance of the development of more efficient circuits that transform energy has also risen. The multi-pulse AC-DC converters used in wind turbines often prove to be ...
  • Single Phase AC-DC Hybrid Boost-SEPIC (HBS) Converter for Improver Power Quality at High Duty Cycle and HBS Converter with Three Phase Inverter Integrated with a LCL Filter 
    Rahman, Mohammad Dehan; Kabir, Md Saif; Rabbi, Md Nazaf; Sarker, Mohammad Abir Hassan (Department of Electrical and Electronic Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    Modern day devices often use an AC source as input even though they are operated with DC voltage. In order to have a suitable and flexible DC output, an AC-DC converter is used. However the conventional converters are not ...
  • Simulation and Study of 5g Technologies and Feasibility of Device-To-Device Communication n LTE 
    Zia, Muhtasim; Bhuiyan, Mashharar; Masud, Sadaf; Ahmed, Zubair (Department of Electrical and Electronic Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    For us to meet the demands of fifth generation technologies, device-to-device (D2D) communication is foreseen to be an important part of fifth generation networks. Device-to- device communication brings significant improvement ...
  • Photonic Crystal Fiber Based Optical Fiber Core Design For Sensing and Transmission in Terahertz Spectrum 
    Islam, Shazedul; Saroar, Abu Nahid; Talha, Khandoker Md. Abu; Rahman, Mushfiqur (Department of Electrical and Electronic Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    Terahertz radiation occupies a middle ground between microwaves and infrared light waves known as the terahertz gap, where technology for its generation and manipulation is in its infancy. The frequency band of 0.1-10 THz, ...
  • Performance Analysis Through Modeling & Simulation of Different Power Converters using MATLAB/Simulink 
    Bashar, Md. Hasibul; Shadat, Khondokar Anwar; Marsad, Mecdad (Department of Electrical and Electronic Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    The recent upsurge in the demand of PV systems is due to the fact that they produce electric power without hampering the environment by directly converting the solar radiation into electric power. However, the solar radiation ...
  • Performance Analysis of V2x Sidelink 
    Mahin, Rafsan; Azad, Md. Abid Hasan bin; Islam, Saiful; Ahmed, Mukto (Department of Electrical and Electronic Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    The industry is moving rapidly to establish standards for V2X communications. V2X is a form of technology that allows vehicles to connect with moving parts of the traffic system around them. DSRC and LTE-V ...
  • PCF Based Optical Fiber Designing for Sensing in Terahertz Spectrum 
    Rezwan, Shaikh; Reza, Md. Sharon; Uzzal, Khalid Saifullah; Fuad, Md. Nafis (Department of Electrical and Electronic Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    Terahertz radiation occupies a middle ground between microwaves and infrared light waves known as the terahertz gap, where technology for its generation and manipulation is in its infancy. The frequency band of 0.1-10 THz, ...
  • High Gain Non-isolated DC-DC Converter Topologies for Energy Conversion Systems 
    Ahmad, Musa; Moumin, Ali; Panhwar, Fahad; Adam, Abdimajid (Department of Electrical and Electronic Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    Emerging applications driven by low voltage level power sources, such as photovoltaics, batteries and fuel cells require static power converters for appropriate energy conversion and conditioning to supply the requirements ...
  • Design of IoT based Smart Energy device for Demand Side Management 
    Mohan, Tanjil Arafat; Rifat, Golam Sarowar Jahan; Khuhawar, Muhammad Ishaque; Haque, Sarker Ehsanul (Department of Electrical and Electronic Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    Our research is based on smart energy. A smart energy system is a cost-effective, sustainable and secure energy system. In this system renewable energy production, infrastructures and consumption are integrated. It is also ...
  • Design and Analysis of Air Gap Based Semi-Elliptical Coupler 
    Sumon, Md. Saiful Islam; Tazwar, Mahir; Khandaker, Sakib Mahtab (Department of Electrical and Electronic Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    Efficient coupling of light between the dielectric waveguide and plasmonic waveg- uide has been investigated theoretically in three dimensions. An air gap based nanoplasmonic semi-elliptical structure of Silicon (Si) is ...
  • An Approach to Improve Breast Cancer Detection by Using Various Strain Estimation Methods and Image Segmentation on Breast Ultrasound (BUS) Images 
    Alam, Md. Maksud; Imtiaz, Shafiq; Hasan, Noor Kutub Al; Sarwar, Fahad Bin (Department of Electrical and Electronic Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    Breast cancer is the only cancer that is considered universal among women worldwide. Breast cancer is the most common cancer in American women, except for skin cancers. Currently, the average risk of a woman in the United ...
  • A Novel and Robust Semi-Automated Best Frame Selection Method from Strain Videos 
    Chowdhury, Gulam Mahfuz; Hasan, Md. Mahedi; Ahmed, Asif; Rahman, Md. Wahid Tousif (Department of Electrical and Electronic Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    Breast cancer is the second leading cause of death of women worldwide. Accurate lesion boundary detection is important for breast cancer diagnosis. Since many crucial features for discriminating benign and malignant ...
  • A Complete Breast Cancer Detection Approach Via Quantitative and Qualitative Analysis of Breast Ultrasound (BUS) Images 
    Shamim, AMK Muntasir; Enayet, Mohmmad Ebne; Abir, Ehsan (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    Globally, cancer is becoming a major health issue as advances in modern medicine continue to extend the human life span. In the U.S., cancer is the second most-common cause of death, exceeded only by heart disease and ...
  • Development of a Short Term Forecasting Model for Electrical Energy Consumption Profile of a Base Station Using Artificial Neural Network 
    Al-Amin, M. Abdullah (Department of Electrical and Electronic Engineering, Islamic University of Technology,Board Bazar, Gazipur, Bangladesh, 2019-11-15)
    Renewable storage device has built a significant place in energy sector. Recently this has achieved a vast development all around the world. With that motivation, this research is focused on forecasting the energy consumption ...
  • Simulation and Analysis of Photovoltaic System with Interleaved Boost Converter 
    Alam, Md. Khairul (Department of Electrical and Electronic Engineering, Islamic University of Technology,Board Bazar, Gazipur, Bangladesh, 2019-11-15)
    In today’s world, energy is a global issue and energy demand is increasing day by day. To satisfy the increasing demand renewable energy sources are fast gaining importance over non-renewable. Among different source of ...
  • Low loss Slotted core photonic crystal fiber for terahertz radiation 
    Islam, Md. Aminul (Department of Electrical and Electronic Engineering, Islamic University of Technology,Board Bazar, Gazipur, Bangladesh, 2019-11-15)
    Fiber optic systems are important telecommunication infrastructure for world-wide broadband networks. Wide bandwidth signal transmission with low delay is a key requirement in present day applications. Optical fibers provide ...
  • Breast Elastography Modulus Reconstruction from Simultaneous Acquisition of Stress and RF Echo Signal 
    Reza, Md. Taslim (Department of Electrical and Electronic Engineering, Islamic University of Technology,Board Bazar, Gazipur, Bangladesh, 2019-11-15)
    Modulus imaging has great potential in soft-tissue characterization since it reveals intrinsic mechanical properties. The elastic properties of biological tissues are usually modified by disease. The physical quantities ...
  • Development of Nonlinear Optimization Techniques Based PID Controller for SEPIC Converter 
    Nishat, Mirza Muntasir (Department of Electrical and Electronic Engineering, Islamic University of Technology,Board Bazar, Gazipur, Bangladesh, 2019-11-15)
    This thesis presents an investigation on closed loop stability of SEPIC (Single-Ended Primary Inductor Converter) converter by employing an optimized PID controller where the parameters are tuned by Genetic Algorithm ...
  • Development of an Extremely Low Loss Photonic Crystal Fiber for THZ Regime 
    Mou, Farhana Akter (Department of Electrical and Electronic Engineering, Islamic University of Technology,Board Bazar, Gazipur, Bangladesh, 2019-11-15)
    In this research, the main focus is to develop Photonic Crystal Fiber (PCF) structures which exhibit ultra-low loss in THz wave propagation. Several researchers recently proposed different types of PCF geometry to minimize ...
  • Nature Inspired Hybrid Optimization Algorithms for Load Flow Analysis of Autonomous Microgrids 
    Abdullah, Saad Mohammad (Department of Electrical and Electronic Engineering, Islamic University of Technology,Board Bazar, Gazipur, Bangladesh, 2019-11-15)
    Load flow analysis is a significant tool for proper planning, operation and dynamic analysis of a conventional power system which provides the steady state values of voltage magnitudes and angles at fundamental frequency. ...

Search IUT Repository


Advanced Search

Browse

My Account