Browsing 2023 by Issue Date

Browsing 2023 by Issue Date

Sort by: Order: Results:

  • Numerical simulation of the application of Fe3O4 nanofluid in photovoltaic thermal collector system 
    Islam, Naimul (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-04-30)
    Concerns over climate change and the depletion of nonrenewable energy sources have contributed to the widespread use of solar power. Solar energy is a renewable and environmentally friendly energy source since it can ...
  • Design Technique to Parameterize a Real-Time Simulation Model of an Industrial Vehicle with Customized Parameters. 
    Adamu, Harrisou (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-04-30)
    This study presents a strategy for building a real-time simulation model that runs in real-time with user-closable, customizable parameters. There are eight steps and four decision points in the proposed design process ...
  • Thermo-hydraulic Analysis of Helically corrugated geometry using Single phase and Hybrid Nanofluids 
    Mustakim, Ashraf; Naqib-Ul-Islam, S.M. (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-04-30)
    This research set out to look at the aspects of flow and convective heat transfer in helically corrugated pipes. The main goal is to evaluate the thermo-hydrodynamic performance of single and hybrid nanofluids in this ...
  • Numerical investigation on double pipe heat exchanger for augmentation of heat transfer having twisted inner pipe with conical ring turbulator 
    Rinik, Rizvi Arefin (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-04-30)
    Double pipe heat exchanger is made of two concentric pipe where one carries hot fluid and another one carries cold fluid inside the pipe. The walls of the pipes allow heat to pass between the fluids. Enhancing the ...
  • BTSQA: An Architecture for Bangla Textual and Spoken Question Answering 
    Jim, Shams Tanveer; Islam, Md.Ashraful; Abdullah, Adnan (Department of Computer Science and Engineering(CSE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-04-30)
    Question answering (QA) is a field within natural language processing (NLP) that focuses on developing systems capable of automatically answering questions posed in human language. QA systems aim to understand the meaning ...
  • A Generalized Machine Learning Model to Predict Significant Wave Height from Wind Parameters 
    Kayes, Imrul; Hasan, Abid; Alam, Minhazul (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-04-30)
    Due to recent energy crises in the post-pandemic world, exploration of marine renewable energy sources is more crucial than ever. Significant wave height is a key parameter for wave energy extraction, it also has a ...
  • Development of IOT Based Smart Irrigation System 
    Salah, Awad; Oumarou, Almouzzammil; Ismaila, Mouhammad Hamza; Amadou, Oumarou (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
    This project presents an IOT based smart irrigation system in order to optimize watering schedules for plants and lawns. The system uses an Arduino Uno microcontroller in conjunction with IoT(Internet of Things) sensors ...
  • Production and Combustion Analysis of Microalgae-based Biodiesel 
    Amin, Md.Sameeul; Bari, A.B.M Najmul (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
    For over the past century, traditional fossil fuel has been the life force of modern society. However, with rising sea-levels and the impending global climate crisis, the entire world and especially tropical countries ...
  • Design and Evaluation of a Novel Solar Biomass Hybrid Dryer with Cutting-Edge Resistive Heating Backup Technology 
    Bari, Sifat Abdul; Fuad, Mohtasim (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
    Over population can have adverse effects on the food balance of a county. One of the major issues is the poor processing and preservation of food. it is a very big challenge for any country to meet the demand of the ...
  • Sensitivity and performance analysis of a comprehensive PEM cell model and fuel cell based renewable autonomous RHFC system for Saint Martin Bangladesh 
    Tamim, Tahmidur Rahman; Chowdhury, Mohammed Arman; Sarkar, Shakhawat Hossain (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
    Providing uninterrupted electricity to remote regions, such as Saint-Martin Island, that have a high potential for renewable energy sources but lack a large-scale grid connection is a formidable challenge. Such ...
  • A Blockchain - Based Secure Model for Automobile Supply Chain with IoT 
    Arnab, Tawsif Zaman; Noor, Ekra Binta (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
    "AutoChain," a blockchain-based solution designed to enhance transparency and trust within the global automotive supply chain. Traditional supply chains often face challenges such as disruptions and difficulties in ...
  • Effect of Point and Line Defects on the Mechanical Behavior of Single Layer MoTe2 
    Aziz, Md. Jobayer (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
    Following the groundbreaking discovery of graphene, the scientific community has witnessed a surge of interest in two-dimensional (2D) materials during recent times, remarkable capabilities and versatility for technological ...
  • Numerical Modelling of Biomass Combustion in a Large-scale Industrial Furnace 
    Raihan, Rownak; Saad, Md. Muhibur Rahman (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
    The world is making a major shift towards renewable energy. As the threat of climate change and global warming becomes more and more imminent, researchers are trying to find sustainable renewable energy sources. Biomass ...
  • Automobile odometer fraud prevention with the implementation of blockchain and deep learning 
    Orony, Intisar Islam; Khan, Ishtiak Ahmed (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
    Automobile odometer fraud prevention has been an issue for the automobile industry for some time. The estimated annual financial damages from this fraud exceed one billion dollars. It is necessary to have a solution ...
  • An Experimental Evaluation of Passive Cooling Configuration for Improving Solar PV systems Efficiency 
    Timur, Kazi Fahad Labib; Hossain, Tahiya; Saif, Mostofa Jahid (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
    As fossil fuel reserves decline and their environmental impact becomes more apparent, the world is increasingly turning to solar energy as a replacement. To convert photons into electricity, fuel, and heat, however, ...
  • Multi Objective Performance Optimization & Thermodynamic Analysis of Advanced Supercritical CO2 Power Cycles for CSP Using ANN & Genetic Algorithim 
    Turja, Asif iqbal; Hasan, Md. Mahmudul (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
  • Experimental Approach to Produce Biogas from fallen Leaves available in IUT Campus 
    Khaled, Md Mainuddin; Kamal, Md. Gias; Porosh, Md Kawser Ahmed (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
  • Numerical Study of Turbulent Flow and Heat Transfer in A Novel Design of Serpentine Channel Coupled with D-Shaped Jaggedness Using Hybrid Nanofluid 
    Ratul, RM Raditun Elahe (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
    This study aimed to examine numerically the effects of a dimpled surface over a mini-channel heat exchanger on the flow characteristics and heat transfer across a serpentine channel with a uniform rectangular cross-section. ...
  • Assessment and Characterization of Potential Locations for Wind Energy Harvest in Bangladesh 
    Tasnim, Maliha; Rifa, Tasnia Islam (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
    Wind, solar, hydro, and geothermal renewable energy sources are becoming more and more important for tackling the energy issue and reducing climate change. Wind energy is regarded as one of nature's cleanest, safest, ...
  • An optimized design of a connecting rod based on buckling and fatigue analysis 
    Rahman, Sabbir; Haque, Md. Mustakim; Utsho, Md. Abu Ishrak (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
    Connecting rod, a vital component of an automotive engine, undergoes stress and deformation producing useful rotary motion. The following work was done aiming to fulfil a research gap in the premises of connecting rod. ...

Search IUT Repository


Advanced Search

Browse

My Account