Browsing 2017 by Issue Date

Browsing 2017 by Issue Date

Sort by: Order: Results:

  • 3d Numerical Investigation of Flow and Heat Transfer Characteristics in Smooth Wavy Fin and Elliptical Tube Heat Exchangers Using ARW Vortex Generator 
    Sabbir, Shah Mohammad; Chowdhury, Sadat Hasan (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    3D computational analysis was performed to investigate heat transfer and pressure drop characteristics of flow in SWFET (Smooth Wavy Fin-and-Elliptical Tube) heat exchanger with VGs (vortex generators). The numerical model ...
  • Parametric Investigation of Induced Oscillation on ARC Welding 
    Alam, Fahrial; Pavel, Mahmudul Hasan; Sanin, Ahmed Yousuf; Rakib, Nuruzzaman (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    Welding is one of the important processes in mechanical engineering. In engineering sector, welding is a common phenomenon. Now-a-days, production time is an important factor in industrial sector because every industries ...
  • Investigation of Surface Roughness During Hot Air Streaming Turning Process of Different Materials and Optimization of Parameters Using Particle Swarm Optimization 
    Mahmud, Md. Firoz; Islam, Md. Minhazul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    Different types of coolants are widely used in different metal cutting processes to improve the machining responses. But the suitability of using the correct cutting fluid is very important considering the concept of green ...
  • EAHE-Solar Chimney Coupled Passive Cooling System and the Simulation 
    Alam, Chowdhury Sadid; Dhrubo, Tm Abir Ahsan (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    In the 21st century the talk of the time has been proper use of renewable energy sources due to the continuous depletion of non-renewable energy sources and global warming as a result of combustion of fossil fuels. The ...
  • Design of a Net Zero Energy Building in Bangladesh using Building Energy Optimization Simulation Tool 
    Aziz, Waleed; Rashik, Rafsan Ahmed (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    A Net Zero Energy Building (NZEB) is a residential or commercial building with greatly reduced energy consumption by efficiency means, such that the remaining energy load can be supplied with Renewable Energy (RE) technologies. ...
  • Designing and Construction of Solar Tracker 
    Abdullah; Muhammad, Jebreel (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    The crucial purpose of our systematic experimental technique is to concentrate the solar radiation on the solar panel i.e. to construct a solar tracker system which will be capable of converting maximum sun light to ...
  • Effect of holes placed on the perforated finned heat exchanger at different angles on the Nusselt and Reynolds numbers 
    Saad, Muhammad (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    In this research, 6mm diameter holes were opened on each circular fin on a heating tube in order to increase convective heat transfer. This is different from the other studies in the literature. These holes were placed ...
  • Design & Fabrication of Vortex Tube for Industrial Cooling 
    Abeer, Arik Inkiyad; Uddin, Md. Misbah; Khan, Muhammad Hamza; Rahma, Yousif; Alkasim, Hassan; Hayat, Khurram (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    A cooling system is very important for both man and machine. In general vapor compression refrigeration system and vapor absorption refrigeration system are used for refrigeration purpose. Vortex tube cooling system is a ...
  • Minimization of Shrinkage Defect in Crankshaft Casting 
    Abubakar, Zayyad; Ullah, Najeeb (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    In our present study, we mainly focused on the reduction of the casting and moulding defects that mainly occurs during metallurgical process and we are able to depict some of those severe problems that might hamper the ...
  • Enhancement of Heat Transfer Using Nano Fluid 
    Sikandar, Faizan (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    Researches in heat transfer have been carried out over the previous several decades, leading to the development of the currently used heat transfer enhancement techniques. The use of additives is a technique applied to ...
  • Study of Combustion of a Biofuel Innovation in Combustion Engines Internal Vehicles 
    Abushibh, Dhiaa Yahya Ali; Mojaly, Hassan Mohammed Ahmed (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
  • Solar Thermal Powered Steam Turbine Power Plant 
    Mohammed, Sami Hamid (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
  • Study of Ocean Wave Energy in an Optimum Wave Tank With a Plunger Type Wave maker 
    Haq, Rafiul; Abdullah, Syed Mohammad; Sunvy, Al Shaharia; Pasha, Tofael Ahmed (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    Renewable energy technology that can operate to rival with conventional energy sources at a monetary elevation. A wave power utensil comprises an energy harvesting strategy. Our Project provides the distinctive and ...
  • Study of vibrational characteristics of carbon fiber composite sandwich plates. 
    Siddique, Md. Abu Bakar; Sakib, Tanvir (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    The vibration and damping performances of hybrid carbon fiber composite pyramidal truss sandwich panels with viscoelastic layers embedded in the face sheets were investigated in this paper. Hybrid carbon fiber composite ...
  • Renewable energy in Afghanistan 
    Nazari, Samiullah (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    Energy is as a soul necessary and a prerequisite in communities. It’s lead to growth the economic it can exist a strength relationship among the communities and makes unity between them. Energy can be use in various type ...
  • Influence of Demand Forecasting in reducing the percentage of Safety Inventory of a Company’s Supply Chain to generate higher efficiency 
    Khan, Abid Hassan; Shahriar, Fahim (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    In this research, we discuss the definition of Demand Forecasting and Safety Inventory and synthesize both to get the impact of their relation for having a higher efficiency. We look at the overlap between demand forecasting ...
  • Heat Transfer Augmentation of Compact Heat Exchangers Using Modern Innovative Techniques, A review and Parametric study 
    Awais, Muhammad (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    This project presents a comprehensive review and numerical study on different ways of enhancing heat transfer rate and pressure loss reduction in compact heat exchangers (CHXs). The sole objective of this study is to gather ...
  • Techno-economic assessment of a stand-alone solar photovoltaic system at IUT campus 
    Thani, Soibahadine Mohamed; David, Saidou Mamadou; Abdallah, Abdirazak (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    Renewable energy resource is considered as clean, it can reduce the emission of greenhouse gases (GHGs) which become a big concern around the world. Electricity produced using solar energy which is one of the renewable ...
  • Designing and Manufacturing the control system of an underwater robot 
    Islam, MD. Maidul; Sumon, MD. Shums (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    As the ocean attracts great attention on environmental issues and resources as well as scientific and military tasks, the need for and use of underwater robotic systems has become more apparent. Underwater robotics represents ...
  • Production of Biodiesel from Microalgae Collected from Ponds 
    Shakib, Mahmudul Alam; Rahat, Md. Sazzadul Alam (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    In this paper, authentic empirical informations on the production of biodiesel from different species of microalgae have been demonstrated after a series of extensive experimentations and research. Two different species ...

Search IUT Repository


Advanced Search

Browse

My Account