Abstract:
In this experimental procedure attempts made to know influence of different fiber on concrete and the effects on Mechanical properties. In this experimental procedure we used same type of 12mm downgrade aggregate and w/c ratio 0.35 for JUTE FIBRE, 0.32 for BANANA FIBRE, 0.31 for COCONUT FIBRE. We have conducted 14 days and 28 days compressive strength.. Our binder content 550 kg/m3. Our S/A ratio 0.40
.. We used super high performance super plasticizer and admixture. We used total
three fibres length 25mm alkali-treated 5% solution of NAOH for one day. Our mix
proportion was 1% and 2% for each fibre we used two cases and each case carries 10
cylinders. By this we have casted 60 cylinder with six cases. We have conducted Rept
Test on the 28 day initially we calculated the physical properties of the fibres and
aggregates.
Description:
Supervised by
Mohammad Zunaied-Bin-Harun,
Assistant Professor,
Department of Civil and Environmental Engineering(CEE),
Islamic University of Technology(IUT),
Board Bazar, Gazipur-1704, Bangladesh
This thesis is submitted in partial fulfillment of the requirements for the degree of Bachelor of Civil and Environmental Engineering, 2024
