Browsing 2014 by Title

Browsing 2014 by Title

Sort by: Order: Results:

  • Analysis of muscles and gripping activities of human hand during drilling operation 
    Khan, Taimur Hassan; Alaqad, Mohammed H (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    Drilling is the most common machining process. One estimate is that 75% of all material removed comes drilling operations. Drilling involves the creation of holes that are right circular cylinders. This is accomplished ...
  • Biomass gasifier cookstove: manuefacturing and perfomance test and Carbon nanotubes from banana peels 
    Adnan, Abir; Rahat, Ali Nowroz (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    Up to now, efforts to replace solid biomass fuels have largely failed as vast numbers of people still use them. The absolute figures are even set to increase in the next decades being that solid biomass is the most abundant ...
  • Blood Flow Dynamics in Cerebral Aneurysm - A CFD Simulation 
    Shishir, Shamiul Sarker; Miah, Md. Abdul Karim (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-10-15)
    In the present study, the dynamics of blood flow in saccular cerebral aneurysms is investigated. The aneurysm is considered to be located at an arterial bend in human vascular system. The flow field is analyzed computationally ...
  • CFD Analysis of Heat Transfer Enhancement Using Nanofluid And Observation Of The Geometric effect in case of Flat Cross Section 
    Faysal, Syed Rafat; Ovi, Ifat Rabbil Qudrat (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    In the present study, the heat transfer enhancement using aluminium oxide with 1% volume fraction nanofluids in laminar pipe flow for different cross-sections with constant heat flux(H1 boundary condition) has been studied ...
  • Conversion of petrol engine to LPG system (dual fuel system) 
    Aishan, Abdulaziz; Alhajaji, Yousef Ahmed (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    Pollution from automobiles has been great concern all over the world Also the increasing demand of energy has soared up the prices of controlling it. Researchers are being carried out throughout the developed and ...
  • Design & construction of an ergonomic footrest for an electric three wheeler vehicle and development of an entrepreneurship scheme including supply chain management 
    Islam, Mohimenul; Khan, Md. Rakin Mashrur; Noman, Khandaker (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    At present Bangladesh, electrical three wheeler vehicles are the most common means of short-distance transport. It is actually a modification of “Rickshaw”, a very old and popular transport of this region. Unlike rickshaw ...
  • Design and analysis of an intelligent stick for blind 
    Anas, Muhammad; Waqas, Muhammad (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    The thesis presents a theoretical and practical model and a system concept to provide a smart electronic aid for blind people. The system is intended to provide overall measures – Artificial vision and object detection. ...
  • Design and construction of mobile phone based automatic security door locking system 
    Idi, Mubaraka; Ahmed, Sayed Noor (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-10-15)
    This project will basically focus on the use of mobile phones to control the security locking system . The basic concept of the project is to detect a particular ringtone from a SIM supporting modem and use it to toggle ...
  • Effects on Natural frequency of Simply Supported Square Plate due to concentrated masses and Circular Cutout 
    Ahshan, Kh. Nazmul; Arnob, Nazmul Hossain (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    In any operation performed by machine on any structure vibration may occur. This vibration can be devastating when the frequency matches with the natural frequency of that structure. Due to resonance the structure can be ...
  • An end-use energy consumption on Bangladeshi textile industry 
    Salman, Asif; Mehadi, Md. Riyad (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    In industrial sector the overall demand of electricity is increasing by about 5% per year in industrial sector. An energy consumption audit was conducted in Kojima Lyric Garments, Gazipur to determine the total electrical ...
  • Experimental And Numerical Study Of Thermal Distribution And Emission In Conventional Kitchen 
    Chowdhury, Mahmood Arifin; Haque, Md. Moinul (2014-11-15)
    Building Energy Simulation (BES) programs often use conventional thermal comfort theories to make decisions, whilst recent research in the field of thermal comfort clearly shows that important effects are not incorporated. ...
  • Experimental performance evalution of heat transfer rate in automotive radiator by adding nanoparticles in different proportions 
    Hemal, Sayed Ahmed AL Hasan; Uddin, Md. Rakib (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    CNG converted engines produces much more heat than Petrol or Diesel Engines .This is because the compression ratio of CNG is higher than other types of engines, high combustion temperature & low performance of coolants. ...
  • Fuel Injector Tester 
    Ibrahim, Mohamed Ahmed; Gorashi, Abdallh Mohammed (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
  • Investigation of the effect of machinability parameters by voice activated ultrasonic sound wave device during turning process of pre-heated mild steel 
    Latif, Md. Sharafat; Neelav, Afzal Hossain (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    Surface roughness represents the dimensional accuracy of the finished product and is one of the most important quality requirements of the finished product. Surface roughness is generally detrimental to the efficient ...
  • Noise Attenuation by Helmholtz Resonators Attached to a Duct 
    Mahmud, Md. Amin; Sameen, Zahin (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    The resonating frequency and the transmission loss due to two 1-DOF cylindrical Helmholtz resonator attached to a duct is thoroughly investigated in this literature to attenuate low frequency noise using finite element ...
  • Performance comparison of built-in-storage type solar water heaters 
    Haque, Md. Azazul; Sadri, Asif Mohaisin; Rahman, K.M. Mahbubur; Rakib, Md. Abdur; Ahmed, Syed Adeeb; Hossain, Md. Shahjalal; Bhuiyan, Md. Fahmid Matin; Haque, Iftehajul; Islam, Md. Rejwan-Ul- (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    Three identical built-in storage type solar water heaters (BSWH) were tested under same conditions simultaneously in IUT campus, Bangladesh. All of the heaters having corrugated plates as absorbers, they differ as one has ...
  • Performance of the Solar Photovoltaic Panels with Water Cooling System 
    Shams, Khaled; Reza, MD. Tahmid; Abyaz, Safawan (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    It is a common phenomenon that absorption of solar radiation increases the temperature of photo voltaic cells , which results in a decrease of efficiency . The objective of this research is to decrease the cell temperature ...
  • Prediction of Fracture Behavior by Image Processing 
    Javed, Asif (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    The failure of structure leads to the loss of money but more importantly, the loss of life. Failures occur for many reasons, including uncertainties in the loading or environment, defects in the materials, propagation of ...
  • Surface Roughness Optimization of Stainless Steel using ABC (Artificial Bee Colony) Algorithm 
    Khan, Koushik Alam; Tomal, A.N.M. Amanullah (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    In any machining operation surface roughness results inaccuracy and inefficiency. So it is always desirable to ensure minimum level of surface roughness. Both of them depend on some parameters like feed, spindle speed and ...
  • Trajectory Planning and Tracking of an Autonomous Robot Vehicle 
    Rifat, Md Mahdiuzzahid; Islam, Md Raihanul; Kamal, Jonaed Bin Mustafa; Islam, Md Wasequl (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    This paper is about trajectory planning and tracking of an autonomous robot vehicle. The autonomous robot was made by transforming a simple RC car into a GPS guided robot. Present and the target locations were given from ...

Search IUT Repository


Advanced Search

Browse

My Account