• Design, construction and manufacturing of the control system of an underwater robot 

  Islam, Md. Shahriar (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)

  In our time we have seen a lot of development in the design and development in the unmanned underwater vehicle for civil and military purposes. A great array of vehicle types and applications has been produced along with ...
• Study of ergonomics and design of a driving seat in a vehicle considering ergonomics 

  Mandol, Saleh Ahmed Shibly; Shams, Md. Hasibul; Anik, A.T.M. Farhan Sadiq (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)

  Automotive seats need to accommodate a wide range of driver sizes over relatively long periods of time and provide isolation from vehicle vibration and shock. To fulfill these requirements, there have been remarkable ...
• Designing and construction of an actuator 

  Hasan, Imran; Uddin, Imtiaz (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)

  Actuator is a mechanism that puts something into automatic action.The goal of our project is to design and construct an actuator which will give an automatic action. For achieving this goal we needed to design a model of ...
• Biogas production from effluent treatment plant 

  Raihan, S. M. Saif; Fuad, S. M. Nafis (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)

  The study based on the possibilities of anaerobic digestion of textile Effluent Treatment Plant (ETP) sludge in mesophilic (32˚-35˚C) condition. A 20 L transparent pot was used as the lab scale digestion chamber. For ...
• Study of the shock wave interaction with a liquid in a container 

  Habib, Abdullahi Ahmed Haji; Rahman, Md.Ashiqur; Hussein, Md.Abir (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)

  All around the world, the modern civilization is trying to find ways to utilize energy. And the major source that many of the used worldy things is the fossil fuel. As the shock wave plays a high role in the energy part ...
• Vibration analysis of a thin cylindrical shell 

  Bari, Md. Muhiminul; Enam, H.M. Khairul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)

  In this paper, vibration characteristics of thin cylindrical shell are investigated by using & ANSYS WORKBENCH 14.0. Vibration response are investigated by Transient Structural analysis for the simply supported boundary ...
• Production of biogas by anaerobic digestion process and process simulation 

  Khan, Muhammad Nazmul Hasan; Baky, Md. Abdullah Hil (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)

  The objective of the paper is to study the production of biogas from an existing biogas plant using food waste. As food waste only rice is used. Also process simulation of methane production and comparison of simulated ...
• Two-phase numerical simulation of nanofluid laminar convection heat transfer through Flat-plate solar collector 

  Arif, Abdul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)

  Scarcity and continuous depletion of conventional energy sources gradually making renewable energy especially solar energy as an alternative energy source. One of the simplest and most direct applications of this energy ...
• Heat transfer properties of nanoparticles and the enhanced performance of a multiphase fluid 

  Shabah, Sami Ahmad; Ahsan, Syed Faiyaz (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)

  Heat transfer is one of the most important fields in modern day engineering. In the last few decades, the field of heat transfer has gained a major research topic in the form of nanofluid. Traditional heat exchanger fluids ...
• Construction of an academic purpose diesel fuel system 

  Bamnjo, Ibrahim; Alfakih, Yahya Mohammad (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)

  The key to a vehicle's overall operation is the superior, quality design of its major moving subsystems. Automotive diesel fuel delivery system in particular must be virtually malfunctioning free for all components for the ...
• Design and fabrication of snake robot 

  Mehmood, Haseeb; Najjar, Khalid zeyad al (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
• Mobile Phone Automobile Security System (MASS) 

  Hossain, Mehedi (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)

  A car security system has become an essential part for all car users as it ensure safety to the properties car. The purpose of this project is to develop a car security system that is cheap and can be controlled by ...
• Production of activated carbon and extraction of Silicon carbide from rice husk 

  Masum, Md. Shah; Foysal, Najmus Sakib (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)

  The abundance and availability of rice husk, an agricultural waste, make them as a good source for precursor of activated carbon and silicon carbide. The present work entitle “Production of Activated Carbon and Extraction ...
• Design of helmholtz resonators in one and two degree of freedom for noise attenuation in pipelines 

  Kuldip, Ananta; Jubayer, Hasan Md. (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)

  A thorough design methodology of one and two degrees of freedom Helmholtz resonators leading to optimized transmission loss is described and validated in this paper. Numerical simulations of acoustic wave propagation in ...
• Experimental study of thermal comfort of urban residential 

  Mojumder, MD. Sadman Sakib; Shahed, MD. Imran (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)

  In residential kitchens insufficiency of ventilation of exhaust gaseous products from gas fired stoves is to be considered a major health apprehension. It may become the reason of destruction of property as well as human ...
• FEM based simulation and analysis of stainless steel turning 

  Karim, Md.Rifat Bin; Osman, Fahim; Islam, Md.Ashiqul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)

  In this paper, an attempt has been made to study the effect of cutting speed and feed rate on the cutting forces and chip breakage in turning process. Nowadays researches on metal cutting processes are being done in different ...
• Carbon nano tube from natural source: banana peel 

  Noor, MD Imtiaz; Talal, Qazi (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)

  Banana peel has a great potential to be used as a source of renewable biomass energy and for extracting some value-added material like activated carbon and carbon nano tube. Banana is the number one fruit in Bangladesh ...
• Improvement of hybrid photovoltaic/thermal solar energy systems. 

  Bari, Saif Mohammad Ishraq; Khan, Arefin Hasan (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)

  Hybrid photovoltaic thermal (PV/T or PVT) solar system combines a simultaneous conversion of the absorbed solar radiation into electricity and heat. In this paper the design of an experimental PVT dual system with modifications ...
• Simulation and comparison of heat flow through rectangular and cylindrical fins by ANSYS 

  Rahman, Md. Anisur; Zubaer, Nazran; Rizvan, Ratul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)

  Heat generation has been a common phenomenon in different mechanical machines. Heat dissipation system thus has become more and more important for better performance and smooth running of the machine. The dissipation has ...
• Conversion of a simple bladeless standing fan into a split air conditioner 

  Murtala, Mustapha; Alnajjar, Othman (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)

  In this project, Conversion of a simple blade less standing fan into a split air conditioning system is aimed, A split air conditioning imply means that the condenser (or sometimes referred to as the “outdoor unit”) is ...

View more