Browsing 2013 by Issue Date

Browsing 2013 by Issue Date

Sort by: Order: Results:

  • Two-phase numerical simulation of nanofluid laminar convection heat transfer through Flat-plate solar collector 
    Arif, Abdul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Scarcity and continuous depletion of conventional energy sources gradually making renewable energy especially solar energy as an alternative energy source. One of the simplest and most direct applications of this energy ...
  • Heat transfer properties of nanoparticles and the enhanced performance of a multiphase fluid 
    Shabah, Sami Ahmad; Ahsan, Syed Faiyaz (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Heat transfer is one of the most important fields in modern day engineering. In the last few decades, the field of heat transfer has gained a major research topic in the form of nanofluid. Traditional heat exchanger fluids ...
  • Production of biogas by anaerobic digestion process and process simulation 
    Khan, Muhammad Nazmul Hasan; Baky, Md. Abdullah Hil (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    The objective of the paper is to study the production of biogas from an existing biogas plant using food waste. As food waste only rice is used. Also process simulation of methane production and comparison of simulated ...
  • Study of ergonomics and design of a driving seat in a vehicle considering ergonomics 
    Mandol, Saleh Ahmed Shibly; Shams, Md. Hasibul; Anik, A.T.M. Farhan Sadiq (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Automotive seats need to accommodate a wide range of driver sizes over relatively long periods of time and provide isolation from vehicle vibration and shock. To fulfill these requirements, there have been remarkable ...
  • Construction of an academic purpose diesel fuel system 
    Bamnjo, Ibrahim; Alfakih, Yahya Mohammad (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    The key to a vehicle's overall operation is the superior, quality design of its major moving subsystems. Automotive diesel fuel delivery system in particular must be virtually malfunctioning free for all components for the ...
  • Vibration analysis of a thin cylindrical shell 
    Bari, Md. Muhiminul; Enam, H.M. Khairul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    In this paper, vibration characteristics of thin cylindrical shell are investigated by using & ANSYS WORKBENCH 14.0. Vibration response are investigated by Transient Structural analysis for the simply supported boundary ...
  • Biogas production from effluent treatment plant 
    Raihan, S. M. Saif; Fuad, S. M. Nafis (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    The study based on the possibilities of anaerobic digestion of textile Effluent Treatment Plant (ETP) sludge in mesophilic (32˚-35˚C) condition. A 20 L transparent pot was used as the lab scale digestion chamber. For ...
  • Design of helmholtz resonators in one and two degree of freedom for noise attenuation in pipelines 
    Kuldip, Ananta; Jubayer, Hasan Md. (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    A thorough design methodology of one and two degrees of freedom Helmholtz resonators leading to optimized transmission loss is described and validated in this paper. Numerical simulations of acoustic wave propagation in ...
  • Study of the shock wave interaction with a liquid in a container 
    Habib, Abdullahi Ahmed Haji; Rahman, Md.Ashiqur; Hussein, Md.Abir (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    All around the world, the modern civilization is trying to find ways to utilize energy. And the major source that many of the used worldy things is the fossil fuel. As the shock wave plays a high role in the energy part ...
  • Designing and construction of an actuator 
    Hasan, Imran; Uddin, Imtiaz (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Actuator is a mechanism that puts something into automatic action.The goal of our project is to design and construct an actuator which will give an automatic action. For achieving this goal we needed to design a model of ...
  • Design, construction and manufacturing of the control system of an underwater robot 
    Islam, Md. Shahriar (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    In our time we have seen a lot of development in the design and development in the unmanned underwater vehicle for civil and military purposes. A great array of vehicle types and applications has been produced along with ...
  • Effect of ultrasonic sound wave on machinability parameters during turning operation of mild steel 
    Russel, Md. Omar Faruque (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    This project aims to investigate the effects of ultrasonic sound signal on the machinability control of mild steel during turning operation. The machinability responses include tool wear, surface roughness, temperature, ...
  • Investigation of surface parameters using green coolant in drilling process 
    Akram, Rana Muhammad Hassnain (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Computer Numerical Control (CNC) is specialized and versatile form of soft Automation in which the functions and motions of a machine tool are controlled by means of a prepared program containing coded alphanumeric data. ...
  • Design, Construction and study of performance of a flat-plate solar heater for winter air conditioning of a small residential building in Bangladesh 
    Haq, Mahmud Arefin; Rashid, Adib bin (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Rising costs of conventional fuels, increasing energy demand, concerns over climate change and pollutants resulted from burning fossil fuels have increased the interest in various renewable energy technologies. The ...
  • Conversion of a simple bladeless standing fan into a split air conditioner 
    Murtala, Mustapha; Alnajjar, Othman (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    In this project, Conversion of a simple blade less standing fan into a split air conditioning system is aimed, A split air conditioning imply means that the condenser (or sometimes referred to as the “outdoor unit”) is ...
  • RFID based car parking system in IUT 
    Islam, Saiful; Hasan, Muhit (Department of Electrical and Electronic Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh, 2013-11-15)
    The goal of our project is to develop a RFID based car parking system in IUT. For achieving this goal we needed to design a electrical circuit integrating RFID reader & tag with a arduino board. At the end of the semester ...
  • Comparative study of I.C. engine performance using different fuels 
    Shuvo, Mohammad Reyad Arefin; Noor-e- Mostofa, Abdullah (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Comparative study of I.C. engine using different fuels is the test of engine performances for different properties of engine as well as comparing these properties using different fuels. The processes involved measuring ...
  • Design, construction & testing of a ½ tr r-12 bare-tube forced convection evaporator for cooling air 
    Haque, Md. Shafiul; Shah, Yousaf (Department of Mechanical and Production Engineering (MPE), 2013-11-15)
    The title of my project is DESIGN, CONSTRUCTION & TESTING OF A ½ TR R-12 BARE-TUBE FORCED CONVECTION EVAPORATOR FOR COOLING AIR. The goal of this presentation is to design and construct a bare tube forced convection ...
  • Study of supply chain management of an industry 
    Fahim, Mirza Abu (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Supply chain management (SCM) is a factory management technique that aims at maximum profit from a business by ensuring visibility in the supply chain. SCM is a dynamic management tool, which is a combination of many ...
  • Improvement of high speed rail pantograph control system using PID controller 
    Alnawafleh, Anas; Almoghrabi, Abdallah; Anda, Mahmud (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)

Search IUT Repository


Advanced Search

Browse

My Account