Browsing 2013 by Title

Browsing 2013 by Title

Sort by: Order: Results:

  • Biogas production from effluent treatment plant 
    Raihan, S. M. Saif; Fuad, S. M. Nafis (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    The study based on the possibilities of anaerobic digestion of textile Effluent Treatment Plant (ETP) sludge in mesophilic (32˚-35˚C) condition. A 20 L transparent pot was used as the lab scale digestion chamber. For ...
  • Carbon nano tube from natural source: banana peel 
    Noor, MD Imtiaz; Talal, Qazi (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Banana peel has a great potential to be used as a source of renewable biomass energy and for extracting some value-added material like activated carbon and carbon nano tube. Banana is the number one fruit in Bangladesh ...
  • Comparative study of I.C. engine performance using different fuels 
    Shuvo, Mohammad Reyad Arefin; Noor-e- Mostofa, Abdullah (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Comparative study of I.C. engine using different fuels is the test of engine performances for different properties of engine as well as comparing these properties using different fuels. The processes involved measuring ...
  • Construction of an academic purpose diesel fuel system 
    Bamnjo, Ibrahim; Alfakih, Yahya Mohammad (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    The key to a vehicle's overall operation is the superior, quality design of its major moving subsystems. Automotive diesel fuel delivery system in particular must be virtually malfunctioning free for all components for the ...
  • Conversion of a simple bladeless standing fan into a split air conditioner 
    Murtala, Mustapha; Alnajjar, Othman (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    In this project, Conversion of a simple blade less standing fan into a split air conditioning system is aimed, A split air conditioning imply means that the condenser (or sometimes referred to as the “outdoor unit”) is ...
  • Design and fabrication of snake robot 
    Mehmood, Haseeb; Najjar, Khalid zeyad al (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
  • Design of helmholtz resonators in one and two degree of freedom for noise attenuation in pipelines 
    Kuldip, Ananta; Jubayer, Hasan Md. (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    A thorough design methodology of one and two degrees of freedom Helmholtz resonators leading to optimized transmission loss is described and validated in this paper. Numerical simulations of acoustic wave propagation in ...
  • Design, construction & testing of a ½ tr r-12 bare-tube forced convection evaporator for cooling air 
    Haque, Md. Shafiul; Shah, Yousaf (Department of Mechanical and Production Engineering (MPE), 2013-11-15)
    The title of my project is DESIGN, CONSTRUCTION & TESTING OF A ½ TR R-12 BARE-TUBE FORCED CONVECTION EVAPORATOR FOR COOLING AIR. The goal of this presentation is to design and construct a bare tube forced convection ...
  • Design, construction and manufacturing of the control system of an underwater robot 
    Islam, Md. Shahriar (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    In our time we have seen a lot of development in the design and development in the unmanned underwater vehicle for civil and military purposes. A great array of vehicle types and applications has been produced along with ...
  • Design, Construction and study of performance of a flat-plate solar heater for winter air conditioning of a small residential building in Bangladesh 
    Haq, Mahmud Arefin; Rashid, Adib bin (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Rising costs of conventional fuels, increasing energy demand, concerns over climate change and pollutants resulted from burning fossil fuels have increased the interest in various renewable energy technologies. The ...
  • Designing and construction of an actuator 
    Hasan, Imran; Uddin, Imtiaz (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Actuator is a mechanism that puts something into automatic action.The goal of our project is to design and construct an actuator which will give an automatic action. For achieving this goal we needed to design a model of ...
  • Effect of ultrasonic sound wave on machinability parameters during turning operation of mild steel 
    Russel, Md. Omar Faruque (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    This project aims to investigate the effects of ultrasonic sound signal on the machinability control of mild steel during turning operation. The machinability responses include tool wear, surface roughness, temperature, ...
  • Experimental study of thermal comfort of urban residential 
    Mojumder, MD. Sadman Sakib; Shahed, MD. Imran (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    In residential kitchens insufficiency of ventilation of exhaust gaseous products from gas fired stoves is to be considered a major health apprehension. It may become the reason of destruction of property as well as human ...
  • FEM based simulation and analysis of stainless steel turning 
    Karim, Md.Rifat Bin; Osman, Fahim; Islam, Md.Ashiqul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    In this paper, an attempt has been made to study the effect of cutting speed and feed rate on the cutting forces and chip breakage in turning process. Nowadays researches on metal cutting processes are being done in different ...
  • Heat transfer properties of nanoparticles and the enhanced performance of a multiphase fluid 
    Shabah, Sami Ahmad; Ahsan, Syed Faiyaz (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Heat transfer is one of the most important fields in modern day engineering. In the last few decades, the field of heat transfer has gained a major research topic in the form of nanofluid. Traditional heat exchanger fluids ...
  • Improvement of high speed rail pantograph control system using PID controller 
    Alnawafleh, Anas; Almoghrabi, Abdallah; Anda, Mahmud (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
  • Improvement of hybrid photovoltaic/thermal solar energy systems. 
    Bari, Saif Mohammad Ishraq; Khan, Arefin Hasan (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Hybrid photovoltaic thermal (PV/T or PVT) solar system combines a simultaneous conversion of the absorbed solar radiation into electricity and heat. In this paper the design of an experimental PVT dual system with modifications ...
  • Investigation of surface parameters using green coolant in drilling process 
    Akram, Rana Muhammad Hassnain (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Computer Numerical Control (CNC) is specialized and versatile form of soft Automation in which the functions and motions of a machine tool are controlled by means of a prepared program containing coded alphanumeric data. ...
  • Mobile Phone Automobile Security System (MASS) 
    Hossain, Mehedi (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    A car security system has become an essential part for all car users as it ensure safety to the properties car. The purpose of this project is to develop a car security system that is cheap and can be controlled by ...
  • Production of activated carbon and extraction of Silicon carbide from rice husk 
    Masum, Md. Shah; Foysal, Najmus Sakib (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    The abundance and availability of rice husk, an agricultural waste, make them as a good source for precursor of activated carbon and silicon carbide. The present work entitle “Production of Activated Carbon and Extraction ...

Search IUT Repository


Advanced Search

Browse

My Account