2013: Recent submissions

  • Islam, Md. Shahriar (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    In our time we have seen a lot of development in the design and development in the unmanned underwater vehicle for civil and military purposes. A great array of vehicle types and applications has been produced along with ...
  • Mandol, Saleh Ahmed Shibly; Shams, Md. Hasibul; Anik, A.T.M. Farhan Sadiq (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Automotive seats need to accommodate a wide range of driver sizes over relatively long periods of time and provide isolation from vehicle vibration and shock. To fulfill these requirements, there have been remarkable ...
  • Hasan, Imran; Uddin, Imtiaz (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Actuator is a mechanism that puts something into automatic action.The goal of our project is to design and construct an actuator which will give an automatic action. For achieving this goal we needed to design a model of ...
  • Raihan, S. M. Saif; Fuad, S. M. Nafis (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    The study based on the possibilities of anaerobic digestion of textile Effluent Treatment Plant (ETP) sludge in mesophilic (32˚-35˚C) condition. A 20 L transparent pot was used as the lab scale digestion chamber. For ...
  • Habib, Abdullahi Ahmed Haji; Rahman, Md.Ashiqur; Hussein, Md.Abir (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    All around the world, the modern civilization is trying to find ways to utilize energy. And the major source that many of the used worldy things is the fossil fuel. As the shock wave plays a high role in the energy part ...
  • Bari, Md. Muhiminul; Enam, H.M. Khairul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    In this paper, vibration characteristics of thin cylindrical shell are investigated by using & ANSYS WORKBENCH 14.0. Vibration response are investigated by Transient Structural analysis for the simply supported boundary ...
  • Khan, Muhammad Nazmul Hasan; Baky, Md. Abdullah Hil (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    The objective of the paper is to study the production of biogas from an existing biogas plant using food waste. As food waste only rice is used. Also process simulation of methane production and comparison of simulated ...
  • Arif, Abdul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Scarcity and continuous depletion of conventional energy sources gradually making renewable energy especially solar energy as an alternative energy source. One of the simplest and most direct applications of this energy ...
  • Shabah, Sami Ahmad; Ahsan, Syed Faiyaz (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Heat transfer is one of the most important fields in modern day engineering. In the last few decades, the field of heat transfer has gained a major research topic in the form of nanofluid. Traditional heat exchanger fluids ...
  • Bamnjo, Ibrahim; Alfakih, Yahya Mohammad (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    The key to a vehicle's overall operation is the superior, quality design of its major moving subsystems. Automotive diesel fuel delivery system in particular must be virtually malfunctioning free for all components for the ...
  • Mehmood, Haseeb; Najjar, Khalid zeyad al (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
  • Hossain, Mehedi (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    A car security system has become an essential part for all car users as it ensure safety to the properties car. The purpose of this project is to develop a car security system that is cheap and can be controlled by ...
  • Masum, Md. Shah; Foysal, Najmus Sakib (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    The abundance and availability of rice husk, an agricultural waste, make them as a good source for precursor of activated carbon and silicon carbide. The present work entitle “Production of Activated Carbon and Extraction ...
  • Kuldip, Ananta; Jubayer, Hasan Md. (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    A thorough design methodology of one and two degrees of freedom Helmholtz resonators leading to optimized transmission loss is described and validated in this paper. Numerical simulations of acoustic wave propagation in ...
  • Mojumder, MD. Sadman Sakib; Shahed, MD. Imran (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    In residential kitchens insufficiency of ventilation of exhaust gaseous products from gas fired stoves is to be considered a major health apprehension. It may become the reason of destruction of property as well as human ...
  • Karim, Md.Rifat Bin; Osman, Fahim; Islam, Md.Ashiqul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    In this paper, an attempt has been made to study the effect of cutting speed and feed rate on the cutting forces and chip breakage in turning process. Nowadays researches on metal cutting processes are being done in different ...
  • Noor, MD Imtiaz; Talal, Qazi (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Banana peel has a great potential to be used as a source of renewable biomass energy and for extracting some value-added material like activated carbon and carbon nano tube. Banana is the number one fruit in Bangladesh ...
  • Bari, Saif Mohammad Ishraq; Khan, Arefin Hasan (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Hybrid photovoltaic thermal (PV/T or PVT) solar system combines a simultaneous conversion of the absorbed solar radiation into electricity and heat. In this paper the design of an experimental PVT dual system with modifications ...
  • Rahman, Md. Anisur; Zubaer, Nazran; Rizvan, Ratul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Heat generation has been a common phenomenon in different mechanical machines. Heat dissipation system thus has become more and more important for better performance and smooth running of the machine. The dissipation has ...
  • Murtala, Mustapha; Alnajjar, Othman (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    In this project, Conversion of a simple blade less standing fan into a split air conditioning system is aimed, A split air conditioning imply means that the condenser (or sometimes referred to as the “outdoor unit”) is ...

Search IUT Repository


Advanced Search

Browse

My Account