• Vibration Analysis of a Rectangular Plate 

  Ahmed, Syed Shaheer Uddin; Mehfuz, Nagib; Rahman, Ebadur (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)

  Vibration is an inevitable occurrence in any structure. The effect of vibration however can be devastating. It can cause stark premature failure incurring huge cost for replacement or repair. Nevertheless if the vibration ...
• Vibration Analysis of a Simple Cantilever Beam 

  Jamal, Kazi Asif; Hakim, Sheikh Tanvir Bin (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)

  Understanding the vibration behavior of a cantilever beam is the major priority of interest of our work. In this work, we have analyzed the real structure behavior of a 30 cm (length) cantilever beam and examined the ...
• Designing a Single Passenger Car: a three-wheeler 

  Barrie, Alusine; Aziz, Mohammed Abdo (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)

  The world automobile industry had experienced near constant growth through to the mid-1980’s. The transition from horse carriages to automobiles brought about uncertainty over the development of the product during the ...
• Preventive maintenance of automobile 

  Elgrashi, Abdalla; Hussein, Abdulraqeb; Nur, Muhamad Hussein (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
• Fabrication of a Quadrocopter 

  Abedin, Ahmed Afif Bin; Shuvo, Md. Jobayer Hossain; Khan, Abir (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)

  This paper presents a quadrocopter helicopter as a prototype platform usable for research and education. Apart from the description fabrication hardware and controlling software, we discuss several issues regarding drone ...
• Development of Carboxymethyl Cellulose (CMC) Based Electro Active Polymer Nano Composite & Its Potential Application As Solid State Dye Sensitized Solar Cell 

  Mahbub, Md. Zakaria (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)

  Organic solar cell research has developed during the past 30 years, but especially in the last decade it has attracted scientific and economic interest triggered by a rapid increase in power conversion efficiencies. This ...
• Determination of the Optimum Phenomena of Universal Refrigeration System & Development of A Testing Bench to Measure Cooling Load of A/C System 

  Asad, Yasin Bin; Shovon, Kaisar Mahmud; Shah, Quazi Md. Zobaer (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)

  Air conditioning and refrigeration definitely belong in the most important engineering achievements of the 20th century. Both technologies make the lives of others far more comfortable and enjoyable. In our project, we ...
• Review of Renewable Energy Projects in Bangladesh 

  Daiyan, Md. Mahir Abdud; Ahmad, Al-Rafin (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)

  Energy is one of the basic needs of the present human civilization. Without energy a nation can not be developed. All the developed countries in the world have the adequate power generation. But in the developing and third ...
• An Investigation of Diaphragm Rupturing Phenomena for Generation of Shock Wave in the Shock Tube 

  Hussain, Shohag; Waseek, Ishfaque (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)

  Shock Wave generation in shock tube now a days very important for Shock Wave study in different fields. For educational purpose the student must visualize what is Shock Wave and it’s properties but it is not possible for ...
• Microcontroller Based Temperature Sensor and Data Logger 

  Uddin, Kazi Ahsan; Arafat, Yeasir (2012-11-15)

  The average temperature during summer season in Bangladesh is quite high. The food industries & houses are exposed to excess heating not only due to the cooking temperature but also by cooking appliances and there‟s always ...
• Study and construction of a single person fuel efficient light weight vehicle and the feasibility of biogas as an alternative fuel 

  Rabbani, G. M.; Erfanullah, A. H. M.; Islam, Mir Thaufeequl; Abdullahi, Ahmed Md. (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)

  All around the world, the modern civilization is trying to harness as much energy as possible from renewable energy resources. Faced with the threat of depletion fossil based fuel and the negative effects of using fossil ...
• Construction and Mechanism of a Humanoid Robot leg 

  Al-Azad, Zubair; Sami, Swad-Us-; Chowdhury, Faiyaz; Chowdhury, Muhammad Faisal Uddin (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)

  This thesis describes designs of the robot-leg mechanisms, hardware and the leg control methods for walking machines. The body of knowledge that applies to mobile wheeled robots is quite well developed. However, autonomous ...
• Fabrication of Micro Heat Pipes of Different Diameter for Cooling of a Desktop Computer Processor 

  Chowdhury, A.M.Sufian (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)

  The experimental observations stated here is on the basis of heat transfer performance of parallel micro heat pipes (PMHPs) of different diameters (ID of 2mm & 3mm) taking Acetone as a working fluid that can be used for ...
• Prospect of solar irrigation system over conventiona l irrigation system 

  Matin, Md.Abdullah Al (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)

  Bangladesh is a third world country with less economic growth. About 36% (Rahimafrooz) of GDP and 64% (Rahimafrooz)of its employment comes from agriculture. But our agricultural history is declining due to lack of ...
• Study of Tool Wear & Surface Roughness Using Artificial Neural Network 

  Reza, Md. Nayemul Islam; Chowdhury, Mohammed Gofran (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)

  In any machining operation, tools wear and surface roughness results inaccuracy and inefficiency. So it is always desirable to ensure minimum level of tool wear and surface roughness. Both of them depend on some parameters ...
• Prediction and Optimization of Surface Roughness by Desirability Analysis 

  Ullah, S M Tawfiq; Khan, Ragib Ishraq; Rahman, Md. Mahfujur (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)

  This project deals with the prediction and optimization of surface roughness by desirability approach. There are some machining parameters that have significant effects on the surface of a metal and cause surface roughness. ...
• Numerical Investigation of Natural Convection in a Cube filled with Nanofluid 

  Rifat, S. M. (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)

  In this project, natural convective heat transfer in a partitioned cube utilizing nanofluids is studied. The vertical left and right walls are considered as the hot and cold walls, respectively and the partitions assumed ...
• Development of The Capsule Orientation Mechanism of an Automatic Capsule Filling Machine 

  Khan, Towhid Alam (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)

  In the automatic Capsule filling machine Vacuum is used to separate the cap and body of a capsule before inserting the formulation into the body part of the capsule. This Vacuum pump consumes a very high amount of power. ...
• Comparison of Performance of a 500 Watt Refrigeration System With One Compressor and Three Refrigerants 

  Sakib, Nazmus; Azam, Rakib-Ul- (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)

  Currently in Bangladesh, most low capacity refrigerant systems (below 1 ton refrigerating effect) use R-12 compressors with R-12 refrigerant fluid. But with the global policy changes of phasing out R-12, these systems need ...
• Electro-Magnetic Suspesion System for Vehicles 

  Rahman, Kazi Moshiur (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)

  A conceptual model of electro-magnetic suspension system is presented. The goal is to provide better performance and smooth operation than the conventional one. Two electro-magnets are used to use the repulsive force to ...

View more