2018: Recent submissions

  • Ullah, Najeeb; Ahmad, Javaid (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    To acknowledge the prominent significance of new generation heat transfer medium (Nanofluid) in current engineering era, we have demonstrated the extensive literature study to shed light on its every crucial aspect. Heat ...
  • Shafiq, Jawad Bin; Arpo, Hasan Tariq; Sadman, Sakif; Daiyan, Ahammed Dilir (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    The report deals with the structural design and modal analysis of wing in an aircraft. Many studies are being carried out for the design of the wings across the globe by the researches to strengthen the aircraft wings for ...
  • Mziarani, Abou Hanifa; Abdalla, Abdirazak; Abubakar, Aayyad (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    For as long as we remember the world source of energy evolved around fossil energy which are limited, expensive and above all are a source of danger to both mankind and its surrounding. This report main focus is to present ...
  • Shahmat, Rahman Raad; Hossain, Mohammad Saqif; Khan, Erfan Wares; Asif, Muhammad (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    The rear spine of a cricket bat gives it a characteristic cross section structure. The sweet spot indicates the position on the bat where the deformation from impact is minimal, and from where the ball comes out with maximum ...
  • Mubasshir, A A; Shafe, Anwar (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    Coolants are used to negate or minimize the thermal stresses developed during any machining process. However, some environmental and health issues are associated with traditional coolant. Documented health issues include ...
  • Mahmud, Saikot; Hamid, Sami (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    Thermal performance of Earth Air Tunnel Heat Exchanger (EATHE) under steady operating conditions has been carried out considering in hot and dry region of Bangladesh using Computational Fluid Dynamics modeling. Effect of ...
  • Chowdhury, Nasimul Eshan (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    Cavitation in marine propeller is a common phenomenon and mitigate it is a demanding issue. In this regard, many studies have been carried out and some solutions have already been proposed. In fact, some of them are already ...
  • Rohit, Rifat Bin Alam; Sultan, Zawad; Rahul, SK Tashowar Tanzim; Hridoy, Ibrahim Hossain (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    Various papers and research works regarding film cooling performance were studied. Parameters, conditions and geometry factors that affect the film cooling effectiveness were analyzed. The objective was to see how modifications ...
  • Mahdin, Saimum; Haque, Mahiul; Rafsan, Shafwat Kabir; Anjum, Tanvir; Rahman, Md.Tashrik (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    A simple, effective design for enclosing portable generators to reduce the radiated noise is an idea that seems to be desired by the consumers in this market. This investigation is to determine the feasibility of producing ...
  • Tanvir, Mahamudul Hasan; Hussain, Afzal; Rahman, M.M. Towfiqur; Zishan, Khandoker; Ishraq, Sakib (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    This work is the optimization of machining parameters in steel turning operation. In this study, the experimental work was carried out by turning Stainless Steel 304 by using carbide inserts. There were three main purposes ...
  • Shahriar, Tanvir; Zaman, Mohammad Shahrear; Hossain, Asif (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    Electricity, the most suitable and convenient form of energy for transmission and usage purpose is the key to the development for a country. The demand of electricity in an underdeveloped country like Bangladesh is increasing ...
  • Zahin, Muhtadi Munawar (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    Machine learning is a subfield of Artificial Intelligence (AI). Its goal is to make sense of a particular group of data and convert them into models that can be utilized by machine and man. The important aspect of Machine ...
  • Fahim, Saiyed Tasnim Md.; Islam, Rayhanul (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    Compact heat exchanger (CHXs) is one of the top choices in residential and industrial applications for its higher thermal efficiency, lower pressure drop, low cost, light weight characteristics. Among various types of ...
  • Mahyoub, Md. Khaled Md. Abdulqader; Mojaly, Hassan Mohammed Ahmed; Abushibh, Dhiaa Yahya Ali (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
  • Ahmed, Tanvir; Anik, Eftekharul Hoque; Rythm, Fahim Ajmal (2018-11-15)
    The simulation of various machining processes is a matter of interest in active research for over two decades. This study develops a combined simulation based and experimental approach to find the effect of rake Angle & ...
  • Rafi, Abdullah Al; Haque, Redwanul; Sikandar, Faizan (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    Pyrolysis of waste plastic is a prospective way of conversion of waste plastic into low-emissive hydrocarbon fuel. The present research is focused on the conversion of waste plastic into low-emissive hydrocarbon fuel by ...
  • Ridoy, Md Abdur Rahman (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
  • Mahfuz, Araf; Ahmed, Ashik (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    The thermodynamic limitation for the maximum efficiencies of internal combustion engines is an important consideration for the design and development of future engines. Knowing these limits helps direct resources to those ...
  • Hero, Md. Kabbir Hossain; Moin, Md. Emran Hossain (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    Space heating and cooling is a comfort requirement which results in a significant amount of energy consumption. EATHE (Earth Air Thermal Heat Exchanger) is one of the passive ways of space heating and cooling that can ...
  • Mubassir, A A; Shafe, Anwar (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)

Search IUT Repository


Advanced Search

Browse

My Account