Browsing 2019 by Issue Date

Browsing 2019 by Issue Date

Sort by: Order: Results:

  • Impact of Energy Consumption and GHG Emission by Private Vehicles in Dhaka, the Capital of Bangladesh 
    Hasan, Muhammad Mahmood; Haque, Md. Ehsanul; Zahin, Mohammad Tosif Nur (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    The last decade has been a fruitful time interval for Bangladesh to attain economic development which upgraded the economic status of this country to a developing or emerging one. The escalating and envious growth of GDP ...
  • Automatic Solar Tracker 
    Imamou, Abdoul-Enziz; Moustapha, Mohamadou (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    Energy crisis is the most important issue in today’s world. Conventional energy resources are not only limited but also the prime culprit for environmental pollution. Renewable energy resources are getting priorities in ...
  • Numerical Evaluation of Thermal Hydraulic Performance in Compact Heat Exchangers with Vortex Generator 
    Abir, Md Atrehar; Bhuiyan, Abdul Aziz (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    The improvements in heat exchanger performance have long attracted many researchers as they are of great technical, economic, and ecological significance. The performance of the fin-and-tube heat exchanger (FTHE) can be ...
  • Mechanical Properties of Composite Material Made of Natural Fibers 
    Khan, Iftakhar Hydar; Rabbani, Nihon (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    A composite material is a material which is composed of two or more materials. There are various kinds of composite materials. Among them, the natural fiber reinforced composite materials are notable as they are more ...
  • Effect of Variation of Aerodynamic Brake Plate Orientation and Multiple Brake Geometries on Incident Drag of Hyperloop Pod 
    Khan, Shahnoor Shamim; Mahmud, Shadman; Adnan, Adib (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    The idea for the Hyperloop has received significant attention, with commentators and analysts expecting it to become a revolutionary and potentially the fastest mode of land transportation on the planet. Various companies ...
  • Study of Automotive Battery Recycling and Development of a Sustainable Method 
    Rumi, Syed Shah Itqan; Hossain, Md. Nahid; Abdullah-Al-Mahtab, Md.; Hassan, Mettaul (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    Lead-acid batteries are most widely used automobile batteries all over the world. Many waste batteries are thrown away every year. But the fact is that lead is only found in nature and therefore it has limited supply. Also, ...
  • Numerical Investigation of Local Scour Around Different Shaped Bridge Piers Using Flow-3d Software 
    Hasan, Rakib; Khan, Rowfi (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    Scour is one of the most protruding factors in bridge failures across the whole world. In this paper, we have studied about the scouring around bridge piers of different hydrodynamic geometries such as circular, square, ...
  • Surface Roughness Analysis Using Sound Signal in Turning of Mild Steel and Their Comparison in Normal and Hot Condition 
    Zamee, Anas Azmayeen; Bhuiyan, Mehedi Hasan; Sakib, Sultan Mahmud (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    Among every other parameters of production process, surface roughness holds its ground as one of the most crucial factor for quality analysis. Good surface finish is a major criterion in almost every machining process. ...
  • EGR cooler design 
    Abdilahi, Osman; Ali, Saqib; Waseem, Muhammad; Kaihan, Mohammad Kazem (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    During the EGR cooler performance is a key issue that a ects the function of EGR system as an anti-pollutant device. There is a signi cant concern to guarantee function of these devices during useful life of vehicle. ...
  • Numerical Investigation on Heat Transfer Performance Using Therminol-55 Fluid in an Internally Six Head Ribbed Tube 
    Shejan, Mashrur Ertija; Noor, Sadman (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    For the last several decades, rising energy value and higher material cost coerced researchers all around the world to discover innovative ways of increasing heat transfer performance in all kinds of heat exchangers (HXs). ...
  • Design of an evacuated at plate collector driven double e ect solar absorption chiller for Automobile Lab of IUT, Gazipur, Bangladesh. 
    Saif, Adnan; Jamil, Faisal; Khan, Md Munzir (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    Conventional vapor compression air conditioning systems are notorious for their greenhouse gas emissions and ozone depletion e ect along with high energy consumption rate. Implementing new environment friendly and ...
  • Fabrication and Experimental Investigation on Mechanical Properties for Different Stacking Sequence of Jute and Carbon Fiber Reinforced Epoxy Composite 
    Shariar, Fahim; Pallab, Md. Mushfiqur Rahman; Supto, Tahamir Hasan (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    The use of natural fibre is increasing at a quick rate in case of not only households but also in the industries due to their economically viable characteristics and recycling abilities. Recently the growth in the use of ...
  • Mass Production of Microalgae Using Low Cost Photobioreactor 
    Reza, Md. Asif; Rahman, Mohaimin (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    We are using fossil fuels as the main source of energy for a long time. As fossil fuels are harmful for its greater C2 emission and are also a limited source of energy they can’t be used as a main source of energy forever ...
  • Production of Bio-Fuel & Bio-Plastic from Vegetable Waste as a Sustainable Waste Management 
    Turag, Md. Morsalin; Rajib, Md. Rayhan Uddin (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    Enlargement of different sectors like industrial, automobile etc. Depends upon the progressive demand of petroleum. Most of the petroleum are commonly known as Hydrocarbon. In Bangladesh, a huge amount of fuel needs to run ...
  • Vibration Analysis of Different Airfoils of Aircraft Wing 
    Mostakim, Zahin; Sajib, Kaisar Ahammed; Zabal, Moaz Ebon (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    Many studies are being carried out for the design of the wings across the globe by the researchers to strengthen the aircraft wings for steady and sturdy structures for dynamic conditions. The wing design involves its ...
  • Vibration Analysis of a Cracked Cantilever Flat Plate 
    Islam, Shawkat (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    This paper investigates the opportunities of observing the response of a cantilevered flat plate through vibration analysis using Eddy-Current Displacement sensors. External disturbance such as excitations, fluctuating ...
  • Vibration Analysis of a Tire 
    Nuhash, Mutasim Fuad; Masud, Md. Shams (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    Noise and vibration, transmitted from road to the body structure of a typical automotive wheel, considered as an important parameter in automotive NVH (Noise, Vibration and Harshness) performance optimization. Having a ...
  • A Case Study: Implementation of Lean Tools to Reduce Lead Time in a Cable Manufacturing Company in Bangladesh 
    Mahmud, Raihan (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    Every small scale company has an effect on the industrial economy of a country and the world if broadly speaking. Globalization, updating technology, and higher competition have a big impact on small scale companies. These ...
  • Grass Cutting Machine 
    Yaya, Mounjouonpou; Nassar, Mahoud A. M.; Abukasher, Abdallah N.M (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    A remote controlled solar lawn mower is a device which reduces the work load on humans for trimming lawn. Rapid growth of various high-tech tools and equipment makes our work comfortable, accurate and time efficient. This ...
  • Development of an Innovative Fireball Fire Extinguishing System 
    Elahi, Ashique E; Rahman, Minhajur (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    Industries are facing a lot of fire based accidents these days. As a result, massive losses of lives as well as money are suffered by the owners. The conventional fire extinguishing systems are found to be not enough to ...

Search IUT Repository


Advanced Search

Browse

My Account