Mechanical and Production Engineering (MPE): Recent submissions

  • Production of Biodiesel from Microalgae Collected from Ponds 
    Shakib, Mahmudul Alam; Rahat, Md. Sazzadul Alam (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    In this paper, authentic empirical informations on the production of biodiesel from different species of microalgae have been demonstrated after a series of extensive experimentations and research. Two different species ...
  • Optimization of logistic concepts in Bangladesh by using Automated Guided Vehicle (AGV) to enhance efficiency, productivity and security in Warehouse Management System (WMS) 
    Hoq, Md. Mahfuzul; Hossain, Nafis; Shaon, Mezba Uddin (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    In the recent time, the automated guided vehicles (AGV) are becoming more common sights in the manufacturing industries and the large warehouses for the purposes of logistic supports and in many other aspects. But in case ...
  • Study of thermal–hydraulic performance of fin-and-oval tube compact heat exchangers with corrugated fin patterns 
    Nasef, Ziad (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    In the recent years the development of application of vortex generator have increased the heat transfer enhancement in compact heat exchanger. But it has been a challenge to improve heat transfer without using vortex ...
  • Application of Modern Supply Chain Management Tools to Power Plants of Bangladesh: A Case Study 
    Mahmud, Asif; Hossain, Md. Moinul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    Power generation sector of a country plays a pivotal role in her overall development and progress. In modern world, as days goes by people are getting depended on technology even more. Bangladesh is the ninth most populous ...
  • Accessible Design and Fabrication of Wheelchair Ramp for Public Bus Transportation and Design Study Based on SolidWorks Simulation 
    Ahmed, Syed Tasnim; Islam, Sakib Ul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    There are an estimated 5.6% people in Bangladesh who have a disability of one kind or another and about 28% of disabled people have physical disabilities. Movement accessibility is an important enabler of strategies to ...
  • Design Modification of cricket bat and comparison of different type of cricket bat using sweet point analysis 
    Nur, Mohammed Intishar; Ahmed, Maruf (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    The sweet spot indicates the position from where the ball comes out with maximum velocity. By changing the position and area of the Sweet spot we can improve the bat performance. As the new rule came into effect from ...
  • A systematic analysis on Quickreturn Vibratory Conveyor 
    Haque, Intesharul; Pranto, MD. Asif Khan; Islam, Tariqul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    A conveyor system is a common piece of mechanical handling equipment that moves materials from one location to another. Conveyors are especially useful in applications involving the transportation of heavy or bulky ...
  • Design and Construction of Thermo acoustic Refrigerator for its optimum Performance and Its application in Machining Process 
    Hasan, Md. Sayeed Ul; Islam, Md. Saiful (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    Different types of coolant are used in machining process to reduce heat and friction between the tool and the work piece, to improve the surface finishing and to increase tool life. But long term exposure to these kinds ...
  • Influence of Demand Forecasting in reducing the percentage of Safety Inventory of a Company’s Supply Chain to generate higher efficiency 
    Khan, Abid Hassan; Shahriar, Fahim (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    In this research, we discuss the definition of Demand Forecasting and Safety Inventory and synthesize both to get the impact of their relation for having a higher efficiency. We look at the overlap between demand forecasting ...
  • Heat Transfer Augmentation of Compact Heat Exchangers Using Modern Innovative Techniques, A review and Parametric study 
    Awais, Muhammad (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    This project presents a comprehensive review and numerical study on different ways of enhancing heat transfer rate and pressure loss reduction in compact heat exchangers (CHXs). The sole objective of this study is to gather ...
  • Study of vibrational characteristics of carbon fiber composite sandwich plates. 
    Siddique, Md. Abu Bakar; Sakib, Tanvir (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    The vibration and damping performances of hybrid carbon fiber composite pyramidal truss sandwich panels with viscoelastic layers embedded in the face sheets were investigated in this paper. Hybrid carbon fiber composite ...
  • Techno-economic assessment of a stand-alone solar photovoltaic system at IUT campus 
    Thani, Soibahadine Mohamed; David, Saidou Mamadou; Abdallah, Abdirazak (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    Renewable energy resource is considered as clean, it can reduce the emission of greenhouse gases (GHGs) which become a big concern around the world. Electricity produced using solar energy which is one of the renewable ...
  • Study of Combustion of a Biofuel Innovation in Combustion Engines Internal Vehicles 
    Abushibh, Dhiaa Yahya Ali; Mojaly, Hassan Mohammed Ahmed (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
  • Solar Thermal Powered Steam Turbine Power Plant 
    Mohammed, Sami Hamid (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
  • Renewable energy in Afghanistan 
    Nazari, Samiullah (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    Energy is as a soul necessary and a prerequisite in communities. It’s lead to growth the economic it can exist a strength relationship among the communities and makes unity between them. Energy can be use in various type ...
  • Designing and Manufacturing the control system of an underwater robot 
    Islam, MD. Maidul; Sumon, MD. Shums (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    As the ocean attracts great attention on environmental issues and resources as well as scientific and military tasks, the need for and use of underwater robotic systems has become more apparent. Underwater robotics represents ...
  • Study of Ocean Wave Energy in an Optimum Wave Tank With a Plunger Type Wave maker 
    Haq, Rafiul; Abdullah, Syed Mohammad; Sunvy, Al Shaharia; Pasha, Tofael Ahmed (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    Renewable energy technology that can operate to rival with conventional energy sources at a monetary elevation. A wave power utensil comprises an energy harvesting strategy. Our Project provides the distinctive and ...
  • Parametric Investigation of Induced Oscillation on ARC Welding 
    Alam, Fahrial; Pavel, Mahmudul Hasan; Sanin, Ahmed Yousuf; Rakib, Nuruzzaman (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    Welding is one of the important processes in mechanical engineering. In engineering sector, welding is a common phenomenon. Now-a-days, production time is an important factor in industrial sector because every industries ...
  • Enhancement of Heat Transfer Using Nano Fluid 
    Sikandar, Faizan (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    Researches in heat transfer have been carried out over the previous several decades, leading to the development of the currently used heat transfer enhancement techniques. The use of additives is a technique applied to ...
  • EAHE-Solar Chimney Coupled Passive Cooling System and the Simulation 
    Alam, Chowdhury Sadid; Dhrubo, Tm Abir Ahsan (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    In the 21st century the talk of the time has been proper use of renewable energy sources due to the continuous depletion of non-renewable energy sources and global warming as a result of combustion of fossil fuels. The ...

Search IUT Repository


Advanced Search

Browse

My Account