Mechanical and Production Engineering (MPE): Recent submissions

Now showing items 21-40 of 355

Numerical Analysis of Tracking Performance in Machine Tools for Disturbance Forces Compensation Using PID And NPID Controller

Mansoor, Abdulsalam; Khmees, Abdulfatah; Elser, Mogtaba (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-07-12)

In modern production, machine tool precision and reliability are critical for producing high quality goods. To meet these objectives, numerous new controllers and control algorithms have been developed, taking use of ...
Thermal Analysis of Double Effect Absorption System Cascaded with Ejector and Enhanced Vapor Compression Refrigeration Cycle

Siddique, Sefat Mahmud; Uzzaman, Md. Muhtasim (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-07-04)

The traditional Double Effect Absorption Refrigeration Cycle (DE-ARC) series and parallel configuration cascaded with the conventional Vapor Compression Refrigeration (VCR) technology solves the limitations faced with ...
Modeling and sensitivity analysis of a PEM fuel cell with waste heat recovery via zeotropic mixture in Organic Rankine cycle

Mishi, Ruqaiya Islam; Islam, Nazmus Shameer; Arif, Md. Ar Rafi Bin (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-09-02)

This study investigates the utilization of Proton Exchange Membrane Fuel Cells (PEMFC) in conjunction with Organic Rankine Cycle (ORC) systems to recover waste heat. It utilizes zeotropic mixes to enhance efficiency. The ...
Basalt-Silk Fiber Reinforced PLA Composites: Effect of Graphene Fillers and Stacking Sequence

Hamim, Md. Hasibur Rahman; Hasan, Tanzim; Shahriar, Farhan (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-06-03)

Fiber Reinforced Composite Materials (FRCPs) are extensively used in aerospace, automotive, structural and multifunctional applications for its outstanding mechanical properties. However, adoption of environment friendly ...
Thermal Analysis of a Novel Power Cycle that Incorporates Recompression with Main Compression Intercooling Brayton Cycle Cascaded with Compression-absorption Refrigeration Cycle

Khan, Tausif Elahi; Samin, Masruf Zaman (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-09-02)

This study describes the development of a novel integrated cooling and power system that incorporates two cascade compression-absorption refrigeration (CCAR) systems as heat recovery systems for the recompression with ...
Analysis of Obstacles in adopting Green Supply Chain Management in the Readymade Garments Sector by Using AHP and ELECTRE I method

Shahriar, Munem; Kaiser, SM Tanoyer (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-06-06)

The rapid growth of the Bangladeshi RMG industry has come at a cost to the environment. With rising consumer consciousness and tightening regulations, sustainable practices are no longer a choice, but a necessity. This ...
A Comprehensive Evaluation of Physics-Informed Long Short-Term Memory Model for Ocean Current Prediction

Sakib, Sakibul Haque; Abrar, Abdullah (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-07-07)

In an era where renewable energy sources are essential for sustainable development and ensuring the quality of life for future generations, ocean energy has emerged as a significant research focus. This is due to its ...
Numerical Modelling of Waste Incineration and the Effect of Flue Gas Recirculation on Pollutant Reduction

Sakib, Nazmus; Dipto, Ahbabul Hoque; Sakib, Nazmus (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-07-03)

The operation of an incinerator inevitably results in the release of greenhouse gases and nitrogen oxides (NOx), which are detrimental to human health. To minimize pollutant gas emissions and maximize energy efficiency, ...
Design and Analysis of Intake Mechanism of Scramjet Engines for Space Launch Applications

Rabbani, Raian E; Shezan, Labib Ahmed; Nayn, Shabab Zulkar (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-06-14)

Space Exploration is gaining importance as we enter the mid-21st century due to various technological advancements and demands. However, the technologies currently in use for Launching objects to space are very inefficient ...
Optimization of Clamp Numbers and Positions to Mitigate Flow-Induced Vibration in High-Speed Fluid Flow Through a Pipe Elbow

Zafir, Hasin Ahmad; Ahmed, Arafat; Hossain, Tanvir (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-06-21)

Vibration in pipe systems can cause fatigue failure, cracking, and life cycle reduction. This paper aims to mitigate flow-induced vibration (FIV) in a pipeline system by finding optimal clamping locations and numbers ...
Numerical Study of Emission Control of Urban and Rural Kitchens for Healthy Environment

Rahman, Md. Hamidur (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2016-03-28)

Lack of proper ventilation of exhaust fumes from gas and biomass fired stoves in both urban and rural residential kitchens are a major health concern for majority populations. It could even cause destruction of property, ...
A Generalized Machine Learning Model to Predict Significant Wave Height from Wind Parameters

Kayes, Imrul Kayes; Hasan, Abid; Alam, Minhazul (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)

Due to recent energy crises in the post-pandemic world, exploration of marine renewable energy sources is more crucial than ever. Significant wave height is a key parameter for wave energy extraction, it also has a ...
A Generalized Machine Learning Model to Predict Significant Wave Height from Wind Parameters

Kayes, Imrul; Hasan, Abid; Alam, Minhazul (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-04-30)

Due to recent energy crises in the post-pandemic world, exploration of marine renewable energy sources is more crucial than ever. Significant wave height is a key parameter for wave energy extraction, it also has a ...
Numerical Simulation on Thermal Analysis of a Single Borehole U-Tube

Daouda, Souleymane; Lamine, Mohamadou (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)

Ground source heat pumps (GSHPs) have emerged as a promising solution for effectively harnessing renewable energy sources. However, their efficiency can be compromised by the accumulation of heat in the soil, posing a ...
Design, Simulation and Fabrication of an Ergonomic Handgrip for Public Transport in Bangladesh

Kabir, Faiyaj; Kabir, Afrida; Chowdhury, Saief Newaz (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)

Many people in Bangladesh who could afford use private vehicles to avoid uncomfortable ride on public vehicles. It causes a huge congestion during the rush hours. To ensure a pleasant journey in public transportation, ...
Thermodynamic analysis of Supercritical CO2 Partial Cooling Cycle integrated with two Organic Rankine Cycles

Shakil, Md. Reduan Afroj (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)

This paper presents an innovative approach for increasing the thermal efficiency of supercritical CO2 (SCO2) power cycles by incorporating partial cooling with a two-bottom organic rankine cycle (ORC). The SCO2 power ...
An Approach for Enhancing the Manufacturing Facility by Implementing the Four Phases of QFD with FMEA

Ahmed, MD. Akib; Rhodik, Anzam Masud (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
Effect of Point and Line Defects on the Mechanical Behavior of Single Layer MoTe2

Aziz, Md. Jobayer (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)

Following the groundbreaking discovery of graphene, the scientific community has witnessed a surge of interest in two-dimensional (2D) materials during recent times, remarkable capabilities and versatility for technological ...
An approach for Enhancing the Manufacturing Facility by Implementing the Four Phases of QFD with FMEA

Ahmed, Md. Akib; Rhodik, Anzam Masud (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
Impact analysis on car Bumper to enhance passenger safety

Ezaz, Kazi Forhan Nadim; Abrar, Mohammad Sakib Ul; Pranto, Ridowan Islam (Department of Civil and Environmental Engineering(CEE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)

Now showing items 21-40 of 355

Search IUT Repository

Advanced Search

Browse

All of IUT Repository
This Community
- By Issue Date
- Authors
- Titles
- Subjects

Recently added

Mechanical and Production Engineering (MPE): Recent submissions

Search IUT Repository

Browse

All of IUT Repository

This Community

My Account