Mechanical and Production Engineering (MPE): Recent submissions

  • Blood Flow Dynamics in Cerebral Aneurysm - A CFD Simulation 
    Shishir, Shamiul Sarker; Miah, Md. Abdul Karim (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-10-15)
    In the present study, the dynamics of blood flow in saccular cerebral aneurysms is investigated. The aneurysm is considered to be located at an arterial bend in human vascular system. The flow field is analyzed computationally ...
  • Vibration analysis of a thin cylindrical shell 
    Islam, Md. Akibul; Alam, Ahmed Nirjhar (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    In this paper, vibration characteristics of thin cylindrical shell are investigated by using & ANSYS WORKBENCH 14.0. Vibration response are investigated by Transient Structural analysis for the simply supported boundary ...
  • Performance comparison of built-in-storage type solar water heaters 
    Haque, Md. Azazul; Sadri, Asif Mohaisin; Rahman, K.M. Mahbubur; Rakib, Md. Abdur; Ahmed, Syed Adeeb; Hossain, Md. Shahjalal; Bhuiyan, Md. Fahmid Matin; Haque, Iftehajul; Islam, Md. Rejwan-Ul- (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    Three identical built-in storage type solar water heaters (BSWH) were tested under same conditions simultaneously in IUT campus, Bangladesh. All of the heaters having corrugated plates as absorbers, they differ as one has ...
  • Noise Attenuation by Helmholtz Resonators Attached to a Duct 
    Mahmud, Md. Amin; Sameen, Zahin (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    The resonating frequency and the transmission loss due to two 1-DOF cylindrical Helmholtz resonator attached to a duct is thoroughly investigated in this literature to attenuate low frequency noise using finite element ...
  • Fuel Injector Tester 
    Ibrahim, Mohamed Ahmed; Gorashi, Abdallh Mohammed (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
  • Biomass gasifier cookstove: manuefacturing and perfomance test and Carbon nanotubes from banana peels 
    Adnan, Abir; Rahat, Ali Nowroz (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    Up to now, efforts to replace solid biomass fuels have largely failed as vast numbers of people still use them. The absolute figures are even set to increase in the next decades being that solid biomass is the most abundant ...
  • Effects on Natural frequency of Simply Supported Square Plate due to concentrated masses and Circular Cutout 
    Ahshan, Kh. Nazmul; Arnob, Nazmul Hossain (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    In any operation performed by machine on any structure vibration may occur. This vibration can be devastating when the frequency matches with the natural frequency of that structure. Due to resonance the structure can be ...
  • An end-use energy consumption on Bangladeshi textile industry 
    Salman, Asif; Mehadi, Md. Riyad (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    In industrial sector the overall demand of electricity is increasing by about 5% per year in industrial sector. An energy consumption audit was conducted in Kojima Lyric Garments, Gazipur to determine the total electrical ...
  • Design and analysis of an intelligent stick for blind 
    Anas, Muhammad; Waqas, Muhammad (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    The thesis presents a theoretical and practical model and a system concept to provide a smart electronic aid for blind people. The system is intended to provide overall measures – Artificial vision and object detection. ...
  • Thermal Performances of Two-metal Micro Heat Pipes (TMMHP) 
    Iqbal, KMN Sarwar (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    Electronic machines are rapidly being developed with the increasing benefits but, getting smaller in sizes resulting in more thermal stress. In an attempt to manage this stress, a comparative study is conducted between a ...
  • Study of Hybrid Photovoltaic Solar Thermal systems during summer months in Bangladesh 
    Miah, Sohel (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    A hybrid photovoltaic (PVT) solar system combines a simultaneous conversion of the absorbed solar radiation into electricity and heat. In this study the design of an experimental PVT/dual system, both air & water circulation ...
  • Study of Product Design Perspectives for Manufacturing Refrigerators in Bangladesh using Analytic Hierarchy Process (AHP) 
    Ahmed, Farhad (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    Product design is a new engineering practice in Bangladesh. Now-a-days different companies are showing willingness on manufacturing engineering products in Bangladesh, where product designing is playing very important ...
  • Investigation and Optimization of the Effects of Application of Ultrasonic Sound Frequencies during Turning Operation of Steel on Machinability Responses 
    Chowdhury, Mohammad Shariful Islam (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    Turning is one of the most common and popular process in industry for manufacturing metallic products. The two single most important output parameters that define the product quality are surface roughness and tool wear. ...
  • Design, construction and manufacturing of the control system of an underwater robot 
    Islam, Md. Shahriar (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    In our time we have seen a lot of development in the design and development in the unmanned underwater vehicle for civil and military purposes. A great array of vehicle types and applications has been produced along with ...
  • Study of ergonomics and design of a driving seat in a vehicle considering ergonomics 
    Mandol, Saleh Ahmed Shibly; Shams, Md. Hasibul; Anik, A.T.M. Farhan Sadiq (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Automotive seats need to accommodate a wide range of driver sizes over relatively long periods of time and provide isolation from vehicle vibration and shock. To fulfill these requirements, there have been remarkable ...
  • Designing and construction of an actuator 
    Hasan, Imran; Uddin, Imtiaz (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Actuator is a mechanism that puts something into automatic action.The goal of our project is to design and construct an actuator which will give an automatic action. For achieving this goal we needed to design a model of ...
  • Biogas production from effluent treatment plant 
    Raihan, S. M. Saif; Fuad, S. M. Nafis (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    The study based on the possibilities of anaerobic digestion of textile Effluent Treatment Plant (ETP) sludge in mesophilic (32˚-35˚C) condition. A 20 L transparent pot was used as the lab scale digestion chamber. For ...
  • Study of the shock wave interaction with a liquid in a container 
    Habib, Abdullahi Ahmed Haji; Rahman, Md.Ashiqur; Hussein, Md.Abir (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    All around the world, the modern civilization is trying to find ways to utilize energy. And the major source that many of the used worldy things is the fossil fuel. As the shock wave plays a high role in the energy part ...
  • Vibration analysis of a thin cylindrical shell 
    Bari, Md. Muhiminul; Enam, H.M. Khairul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    In this paper, vibration characteristics of thin cylindrical shell are investigated by using & ANSYS WORKBENCH 14.0. Vibration response are investigated by Transient Structural analysis for the simply supported boundary ...
  • Production of biogas by anaerobic digestion process and process simulation 
    Khan, Muhammad Nazmul Hasan; Baky, Md. Abdullah Hil (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    The objective of the paper is to study the production of biogas from an existing biogas plant using food waste. As food waste only rice is used. Also process simulation of methane production and comparison of simulated ...

Search IUT Repository


Advanced Search

Browse

My Account