Mechanical and Production Engineering (MPE): Recent submissions

  • RFID based car parking system in IUT 
    Islam, Saiful; Hasan, Muhit (Department of Electrical and Electronic Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh, 2013-11-15)
    The goal of our project is to develop a RFID based car parking system in IUT. For achieving this goal we needed to design a electrical circuit integrating RFID reader & tag with a arduino board. At the end of the semester ...
  • Computational investigation of pulsatile blood flow in the models of arterial stenosis and aneurysm 
    Miah, Md. Abdul Karim (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2018-03-30)
    A numerical analysis based on a finite volume approach is employed for a 2-D axisymmetric, incompressible, laminar flow of mean Reynolds number of 578 so as to simulate and compare the pulsatile blood flow in the models ...
  • Life Cycle Assessment of Renewable Energy Technologies of Bangladesh 
    Baky, Md. Abdullah Hil (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2017-08-30)
    As the benefit of the renewable energy systems getting more and more clear to people, these are being introduced in small scale and large scale in both developed and developing countries. Renewable energy systems show a ...
  • Analysis of Wave Impact on Offshore Structure & Modeling a Physical Wave Creating Device 
    Mannan, Fahad; Imtiaz-Ur-Rahman, Md.; Hossain, Md. Alamin (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2015-11-15)
    Structures in offshore seabed area is quite common affair.Offshore monopile foundation is one of the most commonly used foundation structures.The Sangu Gas field in Sangu river is an example in our country.These offshore ...
  • Study of a Convective Heat Transfer for Laminar and Turbulent Flow of Nano-fluid through a Circular Pipe 
    Mehmood, Aqib; Ismail, Motapon Njikam; Ndiaye, Babacar (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2015-11-15)
  • 3D CFD based optimization technique for muffler design of a motorcycle 
    Shadman, Sakib; Abir, Oneeruddho Hussain (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2015-11-15)
    In order to minimize the sound transmission due to exhaust gases, the most common and important part of the engine system is muffler. A back pressure on engine is always produced due to the use of the exhaust muffler. This ...
  • Study of Effect of Different Burnishing Conditions on Surface Roughness for a Flexible Burnishing Tool 
    Hossain, Tapos; Tuser, Md. Towkir Ahmed; Ovy, S.M. Al Islam (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2015-11-15)
    Burnishing is a very simple and effective method for improvement in surface finish and can be carried out using existing machines, such as lathe. Quality of Surface is an important factor to decide the performance of a ...
  • Stress and Vibration Analysis of a MDOF Excavator Bucket 
    Islam, Md Shahriar (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2015-11-15)
    Multi degrees of freedom (MDOF) excavator is a very popular machine in today’s mining industry and are also popularly used in roads and building constructions or demolition and for material handling. All these uses involve ...
  • Prediction and Optimization of Quality of Drilled Holes During Magnetic Drilling Operation of Glass Fiber Reinforced Polymer Composite 
    Yusuf, Suleiman Mohammed (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2015-11-15)
    This study presents the results of an investigation of the use of Box Behnken design approach to plan the experiments for drilling GFRP composite under different magnetic conditions with an overall objective of optimizing ...
  • Detection of Cracks in a Cantilever Metal Plate Using Vibrational Techniques 
    Shuvo, Sharif Rezwan (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2020-11-15)
    The main objective of this research is to detect crack at different positions of the thin metal cantilever plate based on the natural frequency. Most of the researchers have investigated on beam. Few researchers have ...
  • Analysis of Mechanical Properties of Jute and Carbon Fiber Reinforced Epoxy Hybrid Composite 
    Sujon, Md Abu Shaid (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2020-03-30)
  • Optimization of the Critical Production Process in a Textile Factory using AHP 
    Islam, Md. Tajul (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2020-12-24)
    The process of converting raw materials, components, or parts into finished goods that meet customer’s expectations or specifications is called the production process. Manufacturing commonly uses a man-machine set up with ...
  • Development of an Innovative Fireball Fire Extinguishing System 
    Elahi, Ashique E; Rahman, Minhajur (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    Industries are facing a lot of fire based accidents these days. As a result, massive losses of lives as well as money are suffered by the owners. The conventional fire extinguishing systems are found to be not enough to ...
  • Grass Cutting Machine 
    Yaya, Mounjouonpou; Nassar, Mahoud A. M.; Abukasher, Abdallah N.M (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    A remote controlled solar lawn mower is a device which reduces the work load on humans for trimming lawn. Rapid growth of various high-tech tools and equipment makes our work comfortable, accurate and time efficient. This ...
  • Vibration Analysis of Different Airfoils of Aircraft Wing 
    Mostakim, Zahin; Sajib, Kaisar Ahammed; Zabal, Moaz Ebon (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    Many studies are being carried out for the design of the wings across the globe by the researchers to strengthen the aircraft wings for steady and sturdy structures for dynamic conditions. The wing design involves its ...
  • Vibration Analysis of a Tire 
    Nuhash, Mutasim Fuad; Masud, Md. Shams (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    Noise and vibration, transmitted from road to the body structure of a typical automotive wheel, considered as an important parameter in automotive NVH (Noise, Vibration and Harshness) performance optimization. Having a ...
  • Vibration Analysis of a Cracked Cantilever Flat Plate 
    Islam, Shawkat (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    This paper investigates the opportunities of observing the response of a cantilevered flat plate through vibration analysis using Eddy-Current Displacement sensors. External disturbance such as excitations, fluctuating ...
  • Design of an evacuated at plate collector driven double e ect solar absorption chiller for Automobile Lab of IUT, Gazipur, Bangladesh. 
    Saif, Adnan; Jamil, Faisal; Khan, Md Munzir (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    Conventional vapor compression air conditioning systems are notorious for their greenhouse gas emissions and ozone depletion e ect along with high energy consumption rate. Implementing new environment friendly and ...
  • Fabrication and Experimental Investigation on Mechanical Properties for Different Stacking Sequence of Jute and Carbon Fiber Reinforced Epoxy Composite 
    Shariar, Fahim; Pallab, Md. Mushfiqur Rahman; Supto, Tahamir Hasan (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    The use of natural fibre is increasing at a quick rate in case of not only households but also in the industries due to their economically viable characteristics and recycling abilities. Recently the growth in the use of ...
  • A Case Study: Implementation of Lean Tools to Reduce Lead Time in a Cable Manufacturing Company in Bangladesh 
    Mahmud, Raihan (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    Every small scale company has an effect on the industrial economy of a country and the world if broadly speaking. Globalization, updating technology, and higher competition have a big impact on small scale companies. These ...

Search IUT Repository


Advanced Search

Browse

My Account