Browsing Thesis by Title

Browsing Thesis by Title

Sort by: Order: Results:

  • Nanofluid Implementation in Heat Exchanger Geometries 
    Ahmad, Foyez; Mahmud, Sajjad (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-06-07)
    In recent years, nanotechnology has evolved as an important field that employs sophisticated "green" nanoparticles incorporated in conventional engineering resources. The heat transfer performance of nanofluids is superior ...
  • Noise Attenuation by Helmholtz Resonators Attached to a Duct 
    Mahmud, Md. Amin; Sameen, Zahin (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    The resonating frequency and the transmission loss due to two 1-DOF cylindrical Helmholtz resonator attached to a duct is thoroughly investigated in this literature to attenuate low frequency noise using finite element ...
  • Noise Cancellation for Small Type Generators 
    Mahdin, Saimum; Haque, Mahiul; Rafsan, Shafwat Kabir; Anjum, Tanvir; Rahman, Md.Tashrik (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    A simple, effective design for enclosing portable generators to reduce the radiated noise is an idea that seems to be desired by the consumers in this market. This investigation is to determine the feasibility of producing ...
  • A novel curved-corrugated channel: Thermal-hydraulic performance and design parameters with nanofluid 
    Ahamed, Rifat; Nusrat, Maisha (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
    In the present study, the impact of nanofluids has been analyzed in a corrugated channel with baffles. The primary objective of this study is to evaluate the thermodynamic performance of both single and hybrid nanofluids ...
  • Numerical Analysis for Enhancing the Performance of a Shell and Helical Coiled Tube Heat Exchanger bt adding Continuous Fin, Discontinuous Fins,and Annular Fins on the Coiled Tube 
    Majmader, Fawaz Bukht; Eazdani, Musfique (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
  • Numerical Analysis of Film Cooling on Gas Turbine Blades 
    Rohit, Rifat Bin Alam; Sultan, Zawad; Rahul, SK Tashowar Tanzim; Hridoy, Ibrahim Hossain (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    Various papers and research works regarding film cooling performance were studied. Parameters, conditions and geometry factors that affect the film cooling effectiveness were analyzed. The objective was to see how modifications ...
  • Numerical and Experimental Investigation of Shock wave Propagation in the Open Atmosphere 
    Ehsan, Mohammad Monjurul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    Shock wave propagation in the open atmosphere has been investigated both numerically and experimentally. Three-dimensional numerical code has been used to solve the Euler equations for the upstream and downstream parameters ...
  • Numerical Evaluation of Thermal Hydraulic Performance in Compact Heat Exchangers with Vortex Generator 
    Abir, Md Atrehar; Bhuiyan, Abdul Aziz (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    The improvements in heat exchanger performance have long attracted many researchers as they are of great technical, economic, and ecological significance. The performance of the fin-and-tube heat exchanger (FTHE) can be ...
  • Numerical Investigation of a Hybrid Photovoltaic Thermal PVT Module 
    Chowdhury, Taspia Shawkat; Mita, Mita Noor Hasan; Mohsin, Fatima Tasneem (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-31)
    Over 173,000 terawatts of solar radiation continuously strike the Earth’s atmosphere however, most of this energy is reflected or absorbed and is lost due to insufficient space and technology required to harness the ...
  • A Numerical Investigation of Local Scour Around Different Shape of Bridge Piers and Its Reduction 
    Hasan, Rumana (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-06-30)
    Around the world, local scour is one of the leading causes of bridge collapses and other hydraulic structure failures. The study demonstrates the scour depth and fluid dynamics of different shaped bridge piers, including ...
  • Numerical investigation of local scour around different shaped bridge piers using flow 3d software 
    Shahriyar, Md Abid (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
  • Numerical Investigation of Local Scour Around Different Shaped Bridge Piers Using Flow-3d Software 
    Hasan, Rakib; Khan, Rowfi (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    Scour is one of the most protruding factors in bridge failures across the whole world. In this paper, we have studied about the scouring around bridge piers of different hydrodynamic geometries such as circular, square, ...
  • Numerical Investigation of Mass Injection Approach for Mitigation of Erosion on Propeller from Cavitation 
    Chowdhury, Nasimul Eshan (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    Cavitation in marine propeller is a common phenomenon and mitigate it is a demanding issue. In this regard, many studies have been carried out and some solutions have already been proposed. In fact, some of them are already ...
  • Numerical Investigation of Natural Convection in a Cube filled with Nanofluid 
    Rifat, S. M. (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    In this project, natural convective heat transfer in a partitioned cube utilizing nanofluids is studied. The vertical left and right walls are considered as the hot and cold walls, respectively and the partitions assumed ...
  • Numerical investigation on double pipe heat exchanger for augmentation of heat transfer having twisted inner pipe with conical ring turbulator 
    Rinik, Rizvi Arefin (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-04-30)
    Double pipe heat exchanger is made of two concentric pipe where one carries hot fluid and another one carries cold fluid inside the pipe. The walls of the pipes allow heat to pass between the fluids. Enhancing the ...
  • Numerical Investigation on Heat Transfer Performance Using Therminol-55 Fluid in an Internally Six Head Ribbed Tube 
    Shejan, Mashrur Ertija; Noor, Sadman (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    For the last several decades, rising energy value and higher material cost coerced researchers all around the world to discover innovative ways of increasing heat transfer performance in all kinds of heat exchangers (HXs). ...
  • Numerical Modelling of Biomass Combustion in a Large-scale Industrial Furnace 
    Raihan, Rownak; Saad, Md. Muhibur Rahman (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
    The world is making a major shift towards renewable energy. As the threat of climate change and global warming becomes more and more imminent, researchers are trying to find sustainable renewable energy sources. Biomass ...
  • Numerical Prospect of Ocean Wave Energy Harvesting Using Wells Turbine in Saint Martin Island, Bangladesh 
    Tawkir, Kazi; Rahman, Syed Ashrafur (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
  • Numerical simulation of the application of Fe3O4 nanofluid in photovoltaic thermal collector system 
    Islam, Naimul (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-04-30)
    Concerns over climate change and the depletion of nonrenewable energy sources have contributed to the widespread use of solar power. Solar energy is a renewable and environmentally friendly energy source since it can ...
  • Numerical Simulation on Thermal Analysis of Single Borehole U Tube 
    Ahmad, Ahmad Tijjani; Kamara, Mohamed Alie (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-31)
    The most vital element in evaluating the thermal efficiency of a geothermal coupled heat pump system is the thermal layout of a borehole. It necessitates an understanding of the borehole's U-tube configuration and design. ...

Search IUT Repository


Advanced Search

Browse

My Account