Browsing Thesis by Title

Browsing Thesis by Title

Sort by: Order: Results:

  • Review of Renewable Energy Projects in Bangladesh 
    Daiyan, Md. Mahir Abdud; Ahmad, Al-Rafin (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    Energy is one of the basic needs of the present human civilization. Without energy a nation can not be developed. All the developed countries in the world have the adequate power generation. But in the developing and third ...
  • A Review of the Technologies for Wave Energy Conversion 
    Mahatab, Fardin (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    The primary objective of this article is to provide a comprehensive overview of the wave energy extraction techniques currently in use. The overview will describe the potential of wave technologies as well as their ...
  • A review study on vortex generators 
    Tasnim, Nafisa; Anjum, M Raseed (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-11-15)
    This paper presents a review on the heat transfer increase and reduction in pressure drop for compact heat exchangers (CHXs) by using protrusion of surfaces in the form of surfaces in the form of vortex generators (VGs). ...
  • RFID based car parking system in IUT 
    Islam, Saiful; Hasan, Muhit (Department of Electrical and Electronic Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh, 2013-11-15)
    The goal of our project is to develop a RFID based car parking system in IUT. For achieving this goal we needed to design a electrical circuit integrating RFID reader & tag with a arduino board. At the end of the semester ...
  • Rice Husk Ash Concrete: Study with Experimental and Theoretical result of Compressive Strength and Other Characteristics 
    Uday, Sultan Ul Iffat; Rahman, Ishfaqur (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    This book presents a study on the development of the physical properties of Portland cement by using rice husk ash (RHA) as a supplementary material instead of cement, where RHA from the local paddy milling industry in ...
  • Room Acoustic Parameters of an Auditorium using Ray Tracing Method 
    Antar, Abrar MD Mubashshir; Maruf, Md. Mesbahul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    Sound quality is important for concert halls, seminar room even in room of house too. Ray acoustic is used in simulating the high frequency limit when the wavelengths is smaller than the geometrical features. The ray ...
  • Sensitivity and performance analysis of a comprehensive PEM cell model and fuel cell based renewable autonomous RHFC system for Saint Martin Bangladesh 
    Tamim, Tahmidur Rahman; Chowdhury, Mohammed Arman; Sarkar, Shakhawat Hossain (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
    Providing uninterrupted electricity to remote regions, such as Saint-Martin Island, that have a high potential for renewable energy sources but lack a large-scale grid connection is a formidable challenge. Such ...
  • Simulation and comparison of heat flow through rectangular and cylindrical fins by ANSYS 
    Rahman, Md. Anisur; Zubaer, Nazran; Rizvan, Ratul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Heat generation has been a common phenomenon in different mechanical machines. Heat dissipation system thus has become more and more important for better performance and smooth running of the machine. The dissipation has ...
  • Solar Thermal Powered Steam Turbine Power Plant 
    Mohammed, Sami Hamid (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
  • Stress and Vibration Analysis of a MDOF Excavator Bucket 
    Islam, Md Shahriar (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2015-11-15)
    Multi degrees of freedom (MDOF) excavator is a very popular machine in today’s mining industry and are also popularly used in roads and building constructions or demolition and for material handling. All these uses involve ...
  • Study and comparison of mechanical properties between scrap recycled steel and ship recycled steel. 
    Al-Noor, M. Sadik; Shuvo, Safayet Hossen; Khan, Tausif (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)
    Steel is the most recycled metal in the world and it is impossible to imagine life without steel. It must be recycled maintaining its proper quality and contributing to economy. Scrap recycling and ship recycling are two ...
  • Study and construction of a single person fuel efficient light weight vehicle and the feasibility of biogas as an alternative fuel 
    Rabbani, G. M.; Erfanullah, A. H. M.; Islam, Mir Thaufeequl; Abdullahi, Ahmed Md. (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    All around the world, the modern civilization is trying to harness as much energy as possible from renewable energy resources. Faced with the threat of depletion fossil based fuel and the negative effects of using fossil ...
  • Study of a Convective Heat Transfer for Laminar and Turbulent Flow of Nano-fluid through a Circular Pipe 
    Mehmood, Aqib; Ismail, Motapon Njikam; Ndiaye, Babacar (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2015-11-15)
  • Study of Automotive Battery Recycling and Development of a Sustainable Method 
    Rumi, Syed Shah Itqan; Hossain, Md. Nahid; Abdullah-Al-Mahtab, Md.; Hassan, Mettaul (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    Lead-acid batteries are most widely used automobile batteries all over the world. Many waste batteries are thrown away every year. But the fact is that lead is only found in nature and therefore it has limited supply. Also, ...
  • Study of Combustion of a Biofuel Innovation in Combustion Engines Internal Vehicles 
    Abushibh, Dhiaa Yahya Ali; Mojaly, Hassan Mohammed Ahmed (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
  • Study of Effect of Different Burnishing Conditions on Surface Roughness for a Flexible Burnishing Tool 
    Hossain, Tapos; Tuser, Md. Towkir Ahmed; Ovy, S.M. Al Islam (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2015-11-15)
    Burnishing is a very simple and effective method for improvement in surface finish and can be carried out using existing machines, such as lathe. Quality of Surface is an important factor to decide the performance of a ...
  • Study of environmental pollution by Petrol engines 
    Mohammed, Hammam Ali; Idris, Abdullahi; Mohammed, Abdallah (IUT, MCE, 2016-11-20)
  • Study of ergonomics and design of a driving seat in a vehicle considering ergonomics 
    Mandol, Saleh Ahmed Shibly; Shams, Md. Hasibul; Anik, A.T.M. Farhan Sadiq (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Automotive seats need to accommodate a wide range of driver sizes over relatively long periods of time and provide isolation from vehicle vibration and shock. To fulfill these requirements, there have been remarkable ...
  • Study of Fuel Consumption and GHG Emission of Motorcycles in Dhaka to Offset Pollution by Use of an Alternative Biofuel 
    Anindo, Muhaimin Wasif; Shefat, Md Khaledun Newaz; Abtahi, MD. Mustakim (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    The recent decade has been a prosperous period for Bangladesh's economic growth, which has elevated the country's economic position to developing or emergent. The accelerating expansion of this country's GDP from the Indian ...
  • Study of generation of electricity using wind turbine for IUT south hall residence 
    Mziarani, Abou Hanifa; Abdalla, Abdirazak; Abubakar, Aayyad (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    For as long as we remember the world source of energy evolved around fossil energy which are limited, expensive and above all are a source of danger to both mankind and its surrounding. This report main focus is to present ...

Search IUT Repository


Advanced Search

Browse

My Account