Thesis: Recent submissions

  • Solar Thermal Powered Steam Turbine Power Plant 
    Mohammed, Sami Hamid (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
  • Renewable energy in Afghanistan 
    Nazari, Samiullah (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    Energy is as a soul necessary and a prerequisite in communities. It’s lead to growth the economic it can exist a strength relationship among the communities and makes unity between them. Energy can be use in various type ...
  • Designing and Manufacturing the control system of an underwater robot 
    Islam, MD. Maidul; Sumon, MD. Shums (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    As the ocean attracts great attention on environmental issues and resources as well as scientific and military tasks, the need for and use of underwater robotic systems has become more apparent. Underwater robotics represents ...
  • Study of Ocean Wave Energy in an Optimum Wave Tank With a Plunger Type Wave maker 
    Haq, Rafiul; Abdullah, Syed Mohammad; Sunvy, Al Shaharia; Pasha, Tofael Ahmed (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    Renewable energy technology that can operate to rival with conventional energy sources at a monetary elevation. A wave power utensil comprises an energy harvesting strategy. Our Project provides the distinctive and ...
  • Parametric Investigation of Induced Oscillation on ARC Welding 
    Alam, Fahrial; Pavel, Mahmudul Hasan; Sanin, Ahmed Yousuf; Rakib, Nuruzzaman (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    Welding is one of the important processes in mechanical engineering. In engineering sector, welding is a common phenomenon. Now-a-days, production time is an important factor in industrial sector because every industries ...
  • Enhancement of Heat Transfer Using Nano Fluid 
    Sikandar, Faizan (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    Researches in heat transfer have been carried out over the previous several decades, leading to the development of the currently used heat transfer enhancement techniques. The use of additives is a technique applied to ...
  • EAHE-Solar Chimney Coupled Passive Cooling System and the Simulation 
    Alam, Chowdhury Sadid; Dhrubo, Tm Abir Ahsan (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    In the 21st century the talk of the time has been proper use of renewable energy sources due to the continuous depletion of non-renewable energy sources and global warming as a result of combustion of fossil fuels. The ...
  • Investigation of Surface Roughness During Hot Air Streaming Turning Process of Different Materials and Optimization of Parameters Using Particle Swarm Optimization 
    Mahmud, Md. Firoz; Islam, Md. Minhazul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    Different types of coolants are widely used in different metal cutting processes to improve the machining responses. But the suitability of using the correct cutting fluid is very important considering the concept of green ...
  • Designing and Construction of Solar Tracker 
    Abdullah; Muhammad, Jebreel (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    The crucial purpose of our systematic experimental technique is to concentrate the solar radiation on the solar panel i.e. to construct a solar tracker system which will be capable of converting maximum sun light to ...
  • Minimization of Shrinkage Defect in Crankshaft Casting 
    Abubakar, Zayyad; Ullah, Najeeb (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    In our present study, we mainly focused on the reduction of the casting and moulding defects that mainly occurs during metallurgical process and we are able to depict some of those severe problems that might hamper the ...
  • Design of a Net Zero Energy Building in Bangladesh using Building Energy Optimization Simulation Tool 
    Aziz, Waleed; Rashik, Rafsan Ahmed (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    A Net Zero Energy Building (NZEB) is a residential or commercial building with greatly reduced energy consumption by efficiency means, such that the remaining energy load can be supplied with Renewable Energy (RE) technologies. ...
  • Design & Fabrication of Vortex Tube for Industrial Cooling 
    Abeer, Arik Inkiyad; Uddin, Md. Misbah; Khan, Muhammad Hamza; Rahma, Yousif; Alkasim, Hassan; Hayat, Khurram (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    A cooling system is very important for both man and machine. In general vapor compression refrigeration system and vapor absorption refrigeration system are used for refrigeration purpose. Vortex tube cooling system is a ...
  • Effect of holes placed on the perforated finned heat exchanger at different angles on the Nusselt and Reynolds numbers 
    Saad, Muhammad (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    In this research, 6mm diameter holes were opened on each circular fin on a heating tube in order to increase convective heat transfer. This is different from the other studies in the literature. These holes were placed ...
  • 3d Numerical Investigation of Flow and Heat Transfer Characteristics in Smooth Wavy Fin and Elliptical Tube Heat Exchangers Using ARW Vortex Generator 
    Sabbir, Shah Mohammad; Chowdhury, Sadat Hasan (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    3D computational analysis was performed to investigate heat transfer and pressure drop characteristics of flow in SWFET (Smooth Wavy Fin-and-Elliptical Tube) heat exchanger with VGs (vortex generators). The numerical model ...
  • Investigation of the effect of machinability parameters by voice activated ultrasonic sound wave device during turning process of pre-heated mild steel 
    Latif, Md. Sharafat; Neelav, Afzal Hossain (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    Surface roughness represents the dimensional accuracy of the finished product and is one of the most important quality requirements of the finished product. Surface roughness is generally detrimental to the efficient ...
  • Conversion of petrol engine to LPG system (dual fuel system) 
    Aishan, Abdulaziz; Alhajaji, Yousef Ahmed (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    Pollution from automobiles has been great concern all over the world Also the increasing demand of energy has soared up the prices of controlling it. Researchers are being carried out throughout the developed and ...
  • Prediction of Fracture Behavior by Image Processing 
    Javed, Asif (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    The failure of structure leads to the loss of money but more importantly, the loss of life. Failures occur for many reasons, including uncertainties in the loading or environment, defects in the materials, propagation of ...
  • Performance of the Solar Photovoltaic Panels with Water Cooling System 
    Shams, Khaled; Reza, MD. Tahmid; Abyaz, Safawan (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    It is a common phenomenon that absorption of solar radiation increases the temperature of photo voltaic cells , which results in a decrease of efficiency . The objective of this research is to decrease the cell temperature ...
  • Surface Roughness Optimization of Stainless Steel using ABC (Artificial Bee Colony) Algorithm 
    Khan, Koushik Alam; Tomal, A.N.M. Amanullah (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    In any machining operation surface roughness results inaccuracy and inefficiency. So it is always desirable to ensure minimum level of surface roughness. Both of them depend on some parameters like feed, spindle speed and ...
  • Design & construction of an ergonomic footrest for an electric three wheeler vehicle and development of an entrepreneurship scheme including supply chain management 
    Islam, Mohimenul; Khan, Md. Rakin Mashrur; Noman, Khandaker (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    At present Bangladesh, electrical three wheeler vehicles are the most common means of short-distance transport. It is actually a modification of “Rickshaw”, a very old and popular transport of this region. Unlike rickshaw ...

Search IUT Repository


Advanced Search

Browse

My Account