Thesis: Recent submissions

  • Numerical Investigation of a Hybrid Photovoltaic Thermal PVT Module 
    Chowdhury, Taspia Shawkat; Mita, Mita Noor Hasan; Mohsin, Fatima Tasneem (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-31)
    Over 173,000 terawatts of solar radiation continuously strike the Earth’s atmosphere however, most of this energy is reflected or absorbed and is lost due to insufficient space and technology required to harness the ...
  • Thermal and Hydraulic Performance Comparison of Carbon Based and Metal Based Nano fluids in Flat Plate Solar Collector: A CFD Analysis 
    Nuhash, Mashrur Muntasir; Alam, Md. Ibthisum; Zihad, Ananta (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-31)
    The constant rise in global temperature and the need to reduce fossil fuel consumption has made renewable energy sources desirable, especially solar energy systems. Flat plate solar collector (FPSC) is one of the most ...
  • Data-Driven-Approach-to-Construct-Flow-Field-of-A-2d-Airfoil 
    Chowdhury, Nahiyan; Hossain, Fahmid; Mahi-al-rashid, Abrar (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-06-10)
    Machine learning is quickly becoming a significant scientific computer tool, with enormous potential to broaden the field of computational fluid dynamics. Various research has been conducted in the recent past which ...
  • Thermodynamic Investigation of Combined Cycles And Polygeneration Systems With An Emphasis On Supercritical Carbon Dioxide Power Cycles 
    Bishal, Salim Sadman; Faysal, Dewan Fahim (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-31)
    Because of the tremendous growth in global population and economic activity, as well as growing environmental concerns, efficient energy use will be critical in creating the future energy landscape. Reduced waste heat ...
  • Numerical Simulation on Thermal Analysis of Single Borehole U Tube 
    Ahmad, Ahmad Tijjani; Kamara, Mohamed Alie (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-31)
    The most vital element in evaluating the thermal efficiency of a geothermal coupled heat pump system is the thermal layout of a borehole. It necessitates an understanding of the borehole's U-tube configuration and design. ...
  • Design and Fabrication of a Fire Fighting Drone 
    Mizan, Chowdhury Hassan Bin; Islam, Md Anwarul (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)
    Fire is a disaster that can occur from different natural causes and from manmade causes. Generally, natural fires are the wildfires that occur due to global warming caused by human beings. Generally, the manmade causes ...
  • Effect of Mechanical Vibrations In Sand Casting of Aluminium Alloy Using Organic Binders 
    Mahmud, Safayet; Rownak, Ragib (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)
    This paper represents a systematic finite element analysis to evaluate the various mechanical vibration impacts on sand mold casting during aluminum alloy cooling. In general, the mold materials govern the molten metal ...
  • Design and Analysis of Heat Sink Configurations for Passive Cooling of Solar Panels 
    Ahmed, Ishtiaq; Farhin, Hossain Azmain; Heme, Saziea Afrin (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)
    The reduction in efficiency of polycrystalline solar panels at very high operating temperatures demands the implementation of effective cooling solutions to dissipate the excess heat from the photovoltaic (PV) module. ...
  • A Machine Learning based assessment of OTEC potential in the Bay of Bengal and it's harvesting approach 
    Rashid, Abir; Nakib, Taher Hasan (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)
    Bangladesh has been steeply growing towards a concerning power demand. The coastal region and nearby islands surrounding the Bay of Bengal barely gets more than half of its required power through conventional power grid ...
  • Formulating a Conceptual Framework for Route Planning and Warehouse Design-Operation in the E- Commerce Based Logistics Companies In Bangladesh. 
    Aziz, Md Tawhid; Shahriar, Sk. Tahmid; Faiyaz, F.M. Farhan; Islam, Aseer Nehalul (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)
    Frameworks assist organizations in saving time and increasing the efficiency of their operations by providing a list of all the common process elements found in the majority of businesses that can be used as building blocks. ...
  • Design and Analysis of Heat Transfer of a Fully Spiral and Smooth Exhaust Gas Recirculation Cooler in a Diesel Engine. 
    Waqas, Muhammad; Ullah, Hameed; Javed, Usama (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)
    Currently our planet Earth is facing a severe climate change and the natural resources are consumed at a very vast rate, government strategies, technological companies and world organizations are working hard to reduce ...
  • Feasibility analysis of CSP Technology coupled with TES system for power generation in industrial plants of Bangladesh 
    Ahmed, Fahim; Mubarrat, Mitin (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh., 2022-05-30)
    Different technologies and approaches to diverse methodology may be used to convert solar energy into electrical power, making it an important renewable energy source across the world. Photovoltaic (PV) conversion and ...
  • A Review of the Technologies for Wave Energy Conversion 
    Mahatab, Fardin (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    The primary objective of this article is to provide a comprehensive overview of the wave energy extraction techniques currently in use. The overview will describe the potential of wave technologies as well as their ...
  • Analysis of different metamaterials based on low frequency sound transmission loss using comsol multiphysics 
    Rahman, S. M. Mustafizur; Zakir, Junayed Bin (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    In this day and age noise reduction is an increasingly relevant and rapidly progressing sector of technology. It is necessary due to the numerous psychological benefits of a relatively quiet atmosphere. In this paper, we ...
  • Design and Analysis of A Compressed Air Vehicle 
    Mohamed, Mohamoud; Sadeq, Mohammad; Harir, Kasmal; Adimbo, Ibrahim Zakari (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    Global climate change is the most pressing issue facing the entire globe.Vehicles are one of the primary contributors of pollution. As a result, non-conventional fuels must be substituted for conventional fuels. Compressed ...
  • Control of Seat Vibration of a Vehicle Due to Bump on Road 
    Rashid, Naqib Sadiq; Ishtyaq, Md. Nuhan (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    This work is focused on the seat suspension system of a vehicle. To control the vibration of the seat suspension in such a way so that it not only safe-guard a rider but also provide high level comfort. With that in mind ...
  • Autonomous Path Planning of Unmanned Air Systems Using Computational Methods and Optimization Algorithm 
    Islam, Tausiful; Tanvin, Jahiduzzaman; Hasan, Muhammad Samin (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    In recent years, the use of Unmanned Air Systems (UAS) has become popular in many industries including agriculture, logistics, security agencies and humanitarian missions. An Unmanned Air System consists of a drone or ...
  • Comparative Life Cycle Analysis of Electric and Conventional Vehicle in Bangladesh. 
    Mashiyat, Md Samawat Ahsan; Ahmed, Md. Asif; Atik, Raisul Islam (Department of Business and Technology Management(BTM), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2022-05-30)
    In many parts of the globe, electric cars are being promoted as a means to drastically improve urban air quality while also cutting greenhouse gas emissions. Utilizing a Life Cycle Analysis approach, this study examines ...
  • Photovoltaic Thermoelectric Cooling System For Off-grid Vaccine Refrigerator: An Experimental Study 
    Khan, Nazia Rodoshi; Sharmin, Tasnuva (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    The rapidly rising demand of refrigeration technologies mostly in the fields of refrigeration and air conditioning, medical applications and electronic component cooling resulted in much more energy being produced than ...
  • Design & Development of Firefighting Robot in the Scenario of Bangladesh 
    Alam, Shah Hasibul; Mahmud, Rezwan; Raad, Rakin Robbani (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    Firefighting is an essential yet hazardous profession. Technology has now crossed the gap between humans and machines, enabling for a much more effective and efficient firefighting strategy. Robots developed to locate a ...

Search IUT Repository


Advanced Search

Browse

My Account