Thesis: Recent submissions

  • Optimization of Micro EDM Process Using Multi Objective Grasshopper Optimization Algorithm (MOGOA) 
    Sakib, Mohmmad Shadman (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2021-03-30)
    The complex cross sectional micro-operation entails precise and stable micro machining processes. Localized electrochemical deposition in micro EDM operation is an inexpensive meticulous machining approach which can ...
  • ‘Performance analysis of a geothermal power plant. Case study: Comoros 
    Imamou, Abdoul-Enziz; Moustapha, Mohamadou; Yaya, Mounjouompou (Department of Mechanical and Production Engineering, 2021-03-30)
    The Khathala geothermal field in the Grande Comoros is under development. We propose design of a double flash geothermal power plant, which has a geofluid temperature of 2500 C. The performance analysis of this double ...
  • Assessment of Biogas Potential at IUT from Cafeteria Waste 
    Sayed, Abu; Islam, Khirul; Ali, Md. Hasan; Islam, Md. Shafiul (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur-1704, Bangladesh, 2021-03-30)
    Biogas is a source of clean energy and one kind of renewable energy resource which has highly influence in waste management. Anaerobic digestion is used in formation of biogas from different organic materials and it makes ...
  • Improvement of heat transfer in helical HX with multiple-head ribbed using water-based nanofluids 
    Hasan, Md. Jahid (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    This study shows the comparison between the helical and straight tube heat exchangers with multiple-head ribbed geometries. A computational fluid dynamics model with constant wall temperature condition was developed for ...
  • Heat transfer enhancement using different baffle Spacing arrangement 
    Rahman, Md. Muhibur (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    To enhance the heat transfer rate the feature of a shell and tube heat exchanger was developed by considering the baffle spacing and baffle cut.The research in this project was carried by manual calculations and was performed ...
  • Waste to Energy : Potential of using activated carbon and rice husk ash in primary cells 
    Hossain, Arman; Maroof, Irteza; Mahmud, Md. Fahim (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    Rapid growth of population has brought up some serious concerns, such as waste management and excessive use of fossil fuels causing pollution and negative impact on climate change. A large portion of the waste is organic ...
  • Vibration Analysis of Rotary Drill Rig and Modification Using Absorber Technique 
    Sadeque, Sumaiya Binta; Rahan, Md. Asif (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    Rotary drill rig being an essential tool in construction engineering, reducing its vibration became necessary due to avoiding any kind of fracture or failure. With the depth of hole getting increased, the vibration becomes ...
  • Vibration Analysis of Multi-Story Structures 
    Anam, S.M. Nazrul; Fahim, Abid Md. (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    To determine the dynamic characteristics and properties of an object, Modal analysis, and Harmonic response analysis both are quite essential tools. Natural frequency is a significant dynamic parameter as every structure ...
  • Thermodynamic Analysis of Cascade Refrigeration System for Low Temperature Applications 
    Faruque, Md Walid; Nabil, Mahdi Hafiz (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    In recent years, concern about global warming and ozone layer depletion has been growing. Increasing attention is being given to refrigerants used in refrigeration and air-conditioning systems as they have a signi cant ...
  • Techno-Economic and Environmental Feasibility Analysis of Solar water Heating System for a Textile Industry In Bangladesh 
    Rahman, Md. Ashiqur; Salahuddin, R.R.M.; Shoieb (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    Considering the energy crisis and environmental concerns, green energy technologies are being focused to harness energy from every available source. Extraction of thermal energy using solar collector is one such technology ...
  • Study of the Applicability of Chemical Precipitation and Electrocoagulation Method for Chromium Recovery in CETP at Savar Leather Industrial Park 
    Rahman, Sazedur; Karim, Tasdee Al; Khan, Munabbih Hasan Nadid (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    When we visited tanneries at Savar Tannery Industrial Estate in order to gain a deeper understanding of the leather tanning industry of Bangladesh, we realized that the lack of environmental compliance certification is ...
  • Room Acoustic Parameters of an Auditorium using Ray Tracing Method 
    Antar, Abrar MD Mubashshir; Maruf, Md. Mesbahul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    Sound quality is important for concert halls, seminar room even in room of house too. Ray acoustic is used in simulating the high frequency limit when the wavelengths is smaller than the geometrical features. The ray ...
  • Rice Husk Ash Concrete: Study with Experimental and Theoretical result of Compressive Strength and Other Characteristics 
    Uday, Sultan Ul Iffat; Rahman, Ishfaqur (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    This book presents a study on the development of the physical properties of Portland cement by using rice husk ash (RHA) as a supplementary material instead of cement, where RHA from the local paddy milling industry in ...
  • Performance Comparison of Microchannel Heat Sink using Nano-Liquid-Metal-Fluid Coolant 
    Khan, Yasin; Sarowar, Md Tanbir; Mobarrart, Mahir (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    Augmentation of heat transfer from compact areas is a growing concern for many researchers for quite a long time. The search for ultimate cooling solutions is one of the key aspects of transforming different micro-electr ...
  • Optimization Processes and Analysis of Impact on Productivity 
    Hassan, Abid; Islam, Md. Shihabul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    Optimization in industrial systems is crucial for the competitiveness of any industry in a competitive economy. A well optimized process can ensure most effective utilization of the limited resources, prove to be cost-effective ...
  • Design and Analysis of an Eddy Current Metal Separator in a Single Stream Solid Waste Management System 
    Al Naqib, Shakh Fahad (Department of Mechanical and Production Engineering, 2021-03-30)
    Recovery and recycling of metal items from waste sources is very important in economic and environmental aspects. The purpose of this study is to design and simulate and eddy-current metal separator which is used industrially ...
  • Concept of Eco Scrubbing Technology: A CFD case study in small furnace 
    Zidan, Md. Abidur Rahman; Shihab, S.M. Samiul Bashir; Suprova, Nabila Tabassum; Aktab, Mohd. Mahir (Department of Civil and Environmental Engineering (CEE), Islamic University of Technology (IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    The substantial rise in CO2 percentage in the atmosphere owing to the increasing demand in electrical power is alarming and needs to be addressed. Coal continues to be a key fuel in global energy systems, accounting for ...
  • Assessment of Quality Management System and Intervention of Lean Six Sigma Tools in a Ready Made Garments (RMG) Factory 
    Nafiz, Afsan; Aziz, Md. Abdul (Department of Mechanical and Production Engineering, 2021-03-30)
    Quality Management Systems have become an integral part of modern manufacturing processes. Lean Manufacturing approach, Six Sigma Methodologies and the various tools of Lean Six Sigma approaches are increasingly being ...
  • Well-to-Wheel Life Cycle Analysis of Liquefied Petroleum Gas: an analytical approach 
    Eva, Ishrat Jahan; Mahi, Afrin; Saharier, Fahim (Department of Mechanical and Production Engineering, 2021-03-30)
    Over the past few decades climate has been changed drastically and it has become a crying need to control greenhouse gas emissions for the gas and oil industries. So, it is important to know the impacts on the environment ...
  • Optimized Design of a PTC Based Power Plant in Saint Martin’s Island 
    Khairuzzaman, Md.; Raihanul Islam, Md.; Maheer Asef, S.M. (Department of Mechanical and Production Engineering, 2021-03-30)
    Solar energy is one of the key renewable energy sources of the globe and can be converted into power by using different technologies and approaching various methodologies. As a remote island and being disconnected from the ...

Search IUT Repository


Advanced Search

Browse

My Account