Design of a Surface Plasmon Resonance Based Chemical and Bio Molecular Sensor

Islam, Saimon Bin; Iftekher, A.N.M.; Hasan, Kazi Rakibul; Nayen, Md Julkar

IUT Repository Home
→
Electrical and Electronics Engineering (EEE)
→
Thesis
→
Undergraduate
→
2019
→
View Item

dc.contributor.author	Islam, Saimon Bin
dc.contributor.author	Iftekher, A.N.M.
dc.contributor.author	Hasan, Kazi Rakibul
dc.contributor.author	Nayen, Md Julkar
dc.date.accessioned	2020-12-18T09:44:42Z
dc.date.available	2020-12-18T09:44:42Z
dc.date.issued	2019-11-15
dc.identifier.citation	[1] Homola, J., Surface Resonance Sensors for Detection of Chemical and Biological Species. Chem. Rev., 108(2): p. 462-493, 2008. [2] Homola, J., Present and future of surface plasmon resonance biosensors. Analytical and Bioanalytical Chemistry, 377(3): p. 528-539, 2003. [3] Rich, R.L. and D.G. Myszka, Survey of the year 2005 commercial optical biosensor literature. Journal of Molecular Recognition, 19(6): p. 478-534, 2006. [4] Leidberg, B., et al., Surface Plasmon Resonance for Gas-Detection and Biosensing. Sensors and Actuators, 4(2): p. 299-304, 1983. [5] Homola, J., et al., Spectral surface plasmon biosensor for detection of staphylococcal enterotoxin B in milk. International Journal of Food Microbiology, 75(1-2): p.61-69, 2002. [6] Blobe, G.C., et al., Mechanisms of disease: Role of transforming growth factor beta in human disease. New England Journal of Medicine, 342(18): p.1350-1358, 2000. [7] Adamczyk, M., et al., Application of surface plasmon resonance toward studies of low-molecular-weight antigen-antibody binding interactions. Methods-a Companion to Methods in Enzymology, 20(3): p. 319-328, 2000. [8] Dostalek, J., et al., Rich information format surface plasmon resonance biosensor based on array of diffraction gratings. Sensors and Actuators B-Chemical, 107(1): p. 154-161, 2005. [9] Islam, M. R., Arif Hossain, M., Ali, S. I., Sultana, J., & Saiful Islam, M., Design and Characterization of an Ultra-Low Loss, Dispersion-Flattened Slotted Photonic Crystal Fiber for Terahertz Application. Journal of Optical Communications, 0(0). doi:10.1515/joc-2018-0152 [10] J. A. Buck, “Fundamentals of Optical Fibers,” John Wiley and Sons Inc., USA, 2ndEdition, 2004. [11] K. Kaneshima, Y. Namihira, N. Zou, H. Higa, and Y. Nagata, “Numerical investigation of octagonal photonic crystal fibers with strong confinement field,” IEICE Transactions on Electronics, vol. E89-C, no. 6, pp. 830-837, 2006. [12] Y. Hibino and H. Hanafusa, “Formation mechanism of drawing induced peroxy radicals in pure silica optical fibers,” J. Appl. Phys. Vol. 62, pp. 1433, 1987. [13] B. Liedberg et al “Biosensing with surface plasmon resonance – how it all started.” Biosens.Bioelectron. 10: i-ix; 1995. 73 [14] D. Ferrarini, L. Vincetti, M. Zoboli, A. Cucinotta, and S. Selleri, “Leakage properties of photonic crystal fibers,” Optics Express, vol. 10, no. 23, pp.1314-1319, 2002. [15] G. P. Agrawal, “Nonlinear Fiber Optics,” Academic Press, 2nd Edition, 1995. [16] S. Sjolander and C. Urbaniczky, “Integrated fluid handling system for bio-molecular interaction analysis.” Analytical Chemistry vol. 63, pp. 2338-2345,1991. [17] Y. Hibino and H. Hanafusa, “Defect structure and formation mechanism of drawing induced absorption at 630 nm in silica optical fibers,” J. Appl. Phys. Vol. 60, pp. 1797,1986. [18] M. A. Habib and M. S. Anower, "A Novel Low Loss Porous-Core Photonic Crystal Fiber for Terahertz Wave Transmission," in International Conference on Electrical, Computer and Communication Engineering (ECCE), Cox’s Bazar, Bangladesh, 2017. [19] L. Chaudhary, A. Jb, and H. Purohit, “Photonic Crystal Fibre : Developments , Properties and Applications in Optical Fiber Communication,” International Journal for Research in Applied Science & Engineering Technology (IJRASET), vol. 5, no. Xi, pp. 1828–1832, 2017. [20] R. Islam, G. K. M. Hasanuzzaman, M. S. Habib, S. Rana, and M. A. G. Khan, “Low-loss rotated porous core hexagonal single-mode fiber in THz regime,” Opt. Fiber Technol., vol. 24, pp. 38–43, 2015. [21] I. K. Yakasai, A. Rahman, P. E. Abas, and F. Begum, “Theoretical Assessment of a Porous Core Photonic Crystal Fiber for Terahertz Wave Propagation,” Opt. Commun., pp. 1–11, 2018. [22] J. Sultana et al., “Highly birefringent elliptical core photonic crystal fiber for terahertz application,” Opt. Commun., vol. 407, pp. 92–96, 2017. [23] S. Ali et al., “Guiding properties of a hybrid core porous fiber (HCPF) for terahertz wave propagation,” 2nd International Conference on Electrical, Computer & Telecommunication Engineering (ICECTE), 2016, Rajshahi-6204, Bangladesh. [24] M. R. Hasan, S. Ali, and S. A. Emi, “Ultra-low material loss microstructure fiber for terahertz guidance,” Photonics Lett. Pol., vol. 9, no. 2, pp. 66–68, 2017. [25] Archenault, M., Gagnaire, H., Goure, J. P. and Jaffrezic-Renault, N., "A simple intrinsic optical fibre refractometer," Sensors and Actuators B: Chemical 5(1-4), 173-179 ,1991. 74 [26] Egami, C., Takeda, K., Isai, M. and Ogita, M., "Evanescent-wave spectroscopic fiber optic pH sensor," Optics Communications 122(4-6), 122-126 ,1996. [27] Trolier-McKinstry, S., Fox, G. R., Kholkin, A., Muller, C. A. P. and Setter, N., "Optical fibers with patterned ZnO/electrode coatings for flexural actuators " Sensors and Actuators A: Physical 73(3), 267-274 ,1999. [28] Yuan, J. and El-Sherif, M. A., "Fiber-optic chemical sensor using polyaniline as modified cladding material," IEEE Sensors 3(1), 5-12 ,2003. [29] Guo, H. and Tao, S., "An active core fiber-optic temperature sensor using an Eu(III)-doped sol-gel silica fiber as a temperature indicator," IEEE Sensors Journal 7(6), 953-954 ,2007. [30] MacCraith, B. D., McDonagh, C. M., O'Keeffe, G., McEvoy, A. K., Butler, T. and Sheridan, F. R., "Sol-gel coatings for optical chemical sensors and biosensors," Sensors and Actuators B: Chemical 29(1-3), 51-57 ,1995. [31] Soloman, S., [Sensors Handbook], McGraw Hill 245-246 ,2009. [32] Yin, S., [Fiber optic sensors], 2nd edn, Taylor & Francis Group, CRC Press ,2008. [33] Fuhr, P. L., "Measuring with light (in four parts)," Sensors Magazine, San Jose, CA,2000. [34] Patrick, H. J., Kersey, A. D. and Bucholtz, F., "Analysis of the response of long period fiber gratings to external index of refraction," Journal of light wave technology 16(9), 1606-1612 ,1998. [35] Iadicicco, A., Cusano, A., Campopiano, S., Cutolo, A. and Giordano, M., "Thinned fiber Bragg grating as refractive index sensors," IEEE Sensors Journal 5(6), 1288-1295 ,2005. [36] Iadicicco, A., Campopiano, S., Cutolo, A., Giordano, M. and Cusano, A., "Refractive index sensor based on micro-structured fiber Bragg grating," IEEE Photonics Technology Letters 17(6), 1250-1252 ,2005. [37] Culshaw, B., Muhammad, F., Stewart, G., Murray, S., Pinchbeck, D., Norris, J., Cassidy, S., Wilkinson, M., Williams, D., Crisp, I., Van Ewyk, R. and McGhee, A., "Evanescent wave methane detection using optical fibres," Electronics Letters 28(24), 2232-2234 ,1992. [38] Cox, F. M., Lwin, R., Large, M. C. J. and Cordeiro, C. M. B., "Opening up optical fibres," Optics Express 15(19), 11843-11848 ,2007. 75 [39] Newby, K., Reichert, W. M., Andrade, J. D. and Benner, R. E., "Remote spectroscopic sensing of chemical absorption using a single multimode optical fiber," Applied Optics 23(11), 1812-1815 ,1984. [40] Allsop, T., Reeves, R., Webb, D. J., Bennion, I. and Neal, R., "A high sensitivity refractometer based upon a long period grating Mach-Zehnder interferometer," Review of Scientific Instruments(73), 1702-1705 ,2002. [41] Kurihara, K., Ohkawa, H., Iwasaki, Y., Niwa, O., Tobita, T. and Suzuki, K., "Fiber-optic conical microsensors for surface plasmon resonance using chemically etched single-mode fiber," Analytica Chimica Acta 523(2), 165-170 ,2004. [42] Chiu, M. H., Wang, S. F. and Chang, R. S., "D-type fiber biosensor based on surface-plasmon resonance technology and heterodyne interferometry," Optics Letters 30(3), 233-235 ,2005. [43] Asawa, C. K., Yao, S. K., Stearns, R. C., Mota, N. L. and Downs, J. W., "High-sensitivity fibre-optic strain sensors for measuring structural distortion," Electronics Letters 18(9), 362-364 ,1982. [44] Lagakos, N., Cole, J. H. and Bucaro, J. A., "Microbend fiber-optic sensor," Applied Optics 26(11), 2171-2180 ,1987. [45] Lee, S. T., Aneeshkumar, B., Radhakrishnan, P., Vallabhan, C. P. G. and Nampoori, V. P. N., "A microbent fibre optic pH sensor," Optics Communications 205(4-6), 253-256 ,2002. [46] Pandey, N. K. and Yadav, B. C., "Embedded fibre optic microbend sensor for measurement of high pressure and crack detection," Sensors and Actuators A: Physical 128(1), 33-36 ,2006. [47] Luo, F., Liu, J., Ma, N. and Morse, T. F., "A fiber optic microbend sensor for distributed sensing application in the structural strain monitoring," Sensors and Actuators A: Physical 75(1), 41-44 ,1999. [48] MacLean, A., Moran, C., Johnstone, W., Culshaw, B., Marsh, D. and Parker, P., "Detection of hydrocarbon fuel spills using a distributed fibre optic sensor," Sensors and Actuators A: Physical 109(1-2), 60-67 ,2003. 76 [49] Nath, P., Singh, H. K., Datta, P. and Sarma, K. C., "All-fiber optic sensor for measurement of liquid refractive index," Sensors and Actuators A: Physical 148(1), 16-18 ,2008. [50] Ilev, I. K. and Waynant, R. W., "All-fiber-optic sensor for liquid level measurement," Review of Scientific Instruments 70(5), 2551-2554 ,1999. [51] Komachiya, M., Fumino, T., Sakaguchi, T. and Watanabe, S., "Design of a sensing glass fiber with specific refractive-index composition for a system with 1.3 μm wavelength light source," Sensors and Actuators A: Physical 78(2), 172-179 ,1999. [52] Otsuki, S., Adachi, K. and Taguchi, T., "A novel fiber-optic gas-sensing configuration using extremely curved optical fibers and an attempt for optical humidity detection," Sensors and Actuators B: Chemical 53(1-2), 91-96 ,1998. [53] Yeo, T. L., Sun, T. and Grattan, K. T. V., "Fibre-optic sensor technologies for humidity and moisture measurement," Sensors and Actuators A: Physical 144(2), 280-295 ,2008. [54] Viets, C. and Hill, W., "Fibre-optic SERS sensors with angled tips," Journal of Molecular Structure 565-566(1-3), 515-518 ,2001. [55] Lucotti, A. and Zerbi, G., "Fiber-optic SERS sensor with optimized geometry," Sensors and Actuators B: Chemical 121(2), 356-364 ,2007. [56] Kostovski, G., White, D. J., Mitchell, A., Austin, M. W. and Stoddart, P. R., "Nanoimprinted optical fibres: Biotemplated nanostructures for SERS sensing," Biosensors and Bioelectronics 24(5), 1531-1535 ,2008. [57] Zhang, Y., Gu, C., Schwartzberg, A. M. and Zhang, J. Z., "Surface-enhanced Raman scattering sensor based on D-shaped fiber," Applied Physics Letters 87(12), 123105-123103 ,2005. [58] Jorgenson, R. C. and Yee, S. S., "A fiber-optic chemical sensor based on surface plasmon resonance," Sensors and Actuators B: Chemical 12(3), 213-220 ,1993. [59] Trouillet, A., Ronot-Trioli, C., Veillas, C. and Gagnaire, H., "Chemical sensing by surface plasmon resonance in a multimode optical fibre," Pure and Applied Optics 5(2), 227-237 ,1996. 77 [60] Piliarik, M., Homola, J., Manikova, Z. and Ctyroky, J., "Surface plasmon resonance sensor based on a single-mode polarization-maintaining optical fiber," Sensors and Actuators B: Chemical 90(1-3), 236-242 ,2003. [61] Tubb, A. J. C., Payne, F. P., Millington, R. B. and Lowe, C. R., "Single-mode optical fiber surface plasma wave chemical sensor," Sensors and Actuators B: Chemical 41(1-3), 71-79 ,1997. [62] Keith Refson, “Introduction to DFT and the plane-wave pseudo potential method,” Science and Technologies Facilities Council, pp. 1–55, Apr. 2014. [63] Stig E Barkou Libori, “Photonic Crystal Fiber- From theory to practice,” Ph.D thesis, Technical University of Denmark, Denmark, Feb. 2002. [64] Ray W. Clough and Edward L. Wilson, “Early Finite Element Research at Berkeley,” in the Fifth U.S. National Conference on Computational Mechanics, pp. 1–35, Aug. 1999. [65] Fernando L. Teixeira, “Time-Domain Finite-Difference and Finite-Element Methods for Maxwell Equations in Complex Media,” IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, vol. 56, no. 8, pp. 2150-2166, Aug. 2008. [66] Jo-Yu Wu and Robert Lee, “The Advantages of Triangular and Tetrahedral Edge Elements for Electromagnetic Modeling with the Finite-Element Method,” IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, vol. 45, no. 9, pp. 1431-1437, Sep. 1997. [67] Biacore AB BIACORE Technology Handbook. ,1994. [68] Kretschmann, E. and Reather, H. Radiative decay of nonradiative surface plasmon excited by light. Z.Naturf. 23A: 2135-2136; 1968. [69] Kretschmann, E. Die Bestimmung optischer Konstanten von Metallen durch Anregung von Oberflachenplasmaschwingugnen. Z Phys 241: 313-324; 1971. [70] Otto, A. Exitation of nonradiative surface plasma waves in silver by the method of frustrated total reflection. Z Phys 216: 398-410; 1968. [71] Pockrand, I. et al Surface plasmon spectroscopy of organic monolayer assemblies. Surface Sci. 74: 237-244; 1978. [72] Peterlinz, K. A. and Georgiadis, R. Two-color approach for determination of thickness and dielectric constant of thin films using surface plasmon resonance. Opt.Commun. 130: 260-266; 1996. 78 [73] Liedberg, B. et al Principles of biosensing with an extended coupling matrix and surface plasmon resonance. Sensors and Actuators B 11: 63-72; 1993. [74] Zhang, L. and Uttamchandani, D. Optical chemical sensing employing surface plasmon resonance. Electron Lett. 23: 1469-1470; 1988. [75] Striebel, Ch. et al Characterization of biomembranes by spectral elipsometry, surface plasmon resonance and interferometry with regard to biosensor application. Biosens.Bioelectron. 9: 139-146; 1994. [76] Lofas, S. and Johnsson, B. A novel hydrogel matrix on gold surfaces in surface plasmon resonance sonsors for fast en efficient covalent immobilization of ligands. J.chem.soc., chem commun. 1526-1528; 1990. [77] Lofas, S. Dextran modified self-assembled monolayer surfaces for use in biointeraction analysis with surface plasmon resonance. Pure & Appl.Chem. 67: 829-834; 1995. [78] S. Lofas et al “Bioanalysis with surface plasmon resonance.” Sensors and Actuators B vol. 5, pp. 79-84,1991. [79] R. Karlsson et al “Kinetic analysis of monoclonal antibody-antigen interactions with a new biosensor based analytical system.” Journal of Immunological Methods 229-240; 1991. [80] P. Safsten et al, “Screening antibody-antigen interactions in parallel using Biacore A100.” Analytical Biochemistry ,2006. [81] B.D. Gupta and A.K. Sharma,“Sensitivity evaluation of a multi-layered surface plasmon resonance-based fiber optic sensor: A theoretical study.”Sens. Actuators B Chem., vol. 107, no. 9, pp. 40–46,2005. [82] K.M. Mc Peak, S.V. Jayanti, S.J. Kress, S. Meyer, S. Iotti, and A. Rossinelli, “Plasmonic films can easily be better: Rules and recipes.” ACS Photonics, vol. 2, pp. 326–333, 2015. [83] Y. Lu, C.J. Hao, B.Q. Wu, M. Musideke, L.C. Duan, W.Q. Wen, and J.Q. Yao, “Surface plasmon resonance sensor based on polymer photonic crystal fibers with metal nano layers.” Sensors, vol. 13, pp. 956–965, 2013. [84] B. D. Gupta and R. K. Verma, Surface Plasmon Resonance-Based Fiber Optic Sensors: Principle, Probe Designs, and Some Applications, Journal of Sensors, 2009,1-12,2009. 79 [85] Zamarreño, C. R., Rivero, P. J., Hernaez, M., Goicoechea, J., Matías, I. R., & Arregui, F. J. Optical Sensors for Corrosion Monitoring. Intelligent Coatings for Corrosion Control, 603–640 ; 2015. [86] Descrovi, E., Paeder, V., Vaccaro, L., & Herzig, H.-P. A virtual optical probe based on localized Surface Plasmon Polaritons. Optics Express, 13(18), 7017. doi:10.1364/opex.13.007017, 2005. [87] Anderson, G. P., & Taitt, C. R. EVANESCENT WAVE FIBER OPTIC BIOSENSORS. Optical Biosensors, 83–138, 2008. [88] Ligler, F. S. and Taitt, C. R. (eds), Optical biosensors: today and tomorrow, Elsevier Science, 2008. [89] Raether, H., [Surface plasmons on smooth and rough surfaces and on gratings], Springer, New York, 1988. [90] Ritchie, R. H., Arakawa, E. T., Cowanand, J. J. and Hamm, R. N., "Surface plasmon resonance effect in grating diffraction," Physical Review Letters 21(22), 1530-1533 ,1968. [91] Barnes, W. L., Murray, W. A., Dintinger, J., Devaux, E. and Ebbesen, T. W., "Surface plasmon polaritions and their role in the enhanced transmission of light through periodic arrays of subwavelength holes in a metal film," Physical Review Letters 92(10), 107401 ,2004. [92] Sharma, A. K, Jha, R. and Gupta, B. D., "Fiber-optic sensors based on surface plasmon resonance: a comprehensive review," IEEE Sensors 7(8), 1118-1129 ,2007. [93] Fan, X., White, I. M., Shopova, S. I., Zhu, H., Suter, J. D. and Sun, Y., "Sensitive optical biosensors for unlabeled targets: a review," Analytica Chimica Acta 620(1-2), 8-26 ,2008. [94] Wolfbeis, O. S., "Fiber-optic chemical sensors and biosensors," Analytical Chemistry 80(12), 4269-4283 ,2008. [95] Lee, B., Roh, S. and Park, J., "Current status of micro- and nano-structured optical fiber sensors," Optical Fiber Technology 15(3), 209-221 ,2009. [96] Homola, J., "Optical fiber sensor based on surface plasmon excitation," Sensors and Actuators B: Chemical 29(1-3), 401-405 ,1995. [97] Tseng, S. M., Hsu, K. Y., Wei, H. S. and Chen, K. F., "Analysis and experiment of thin metal-clad fiber polarizer with index overlay," IEEE Photonics Technology Letters 9(5), 628-630 ,1997. 80 [98] Esteban, O., Alonso, R., Navarrete, M. C. and Cano, A. G., "Surface plasmon excitation in fiber-optics sensors: a novel theoretical approach," Journal of lightwave technology 20(3), 448-453 ,2002. [99] Lin, G. C., Wang, L., Yang, C. C., Shih, M. C. and Chuang, T. J., "Thermal performance of metal-clad fiber Bragg grating sensors," IEEE Photonics Technology Letters 10(3), 406-408 ,1998. [100] Schroeder, K., Ecke, W., Mueller, R., Willsch, R. and Andreev, A., "A fibre Bragg grating refractometer," Measurement Science and Technology 12(7), 757-764 ,2001. [101] Sharma, A. K and Gupta, B. D., "Fiber optic sensor based on surface plasmon resonance with nanoparticle films," Photonics and Nanostructures - Fundamentals and Applications 3(1), 30-37 ,2005. [102] Sharma, A. K and Gupta, B. D., "Fiber-optic sensor based on surface plasmon resonance with Ag-Au alloy nanoparticle films," Nanotechnology 17(1), 124-131 ,2006. [103] R. Hasan, S. Akter, A. A. Rifat, S. Rana, and S. Ali, “A Highly Sensitive Gold-Coated Photonic Crystal Fiber Biosensor Based on Surface Plasmon Resonance” Photonics, vol. 4, no. 4, pp. 18 ,2017. [104] A. Vial, A. Grimault, and D. Barchiesi, “Improved Analytical Fit of Gold Dispersion: Application to the Modeling of Extinction Spectra with a Finite-Difference Time-Domain Method,” Physical Review B, vol. 71, no.8, pp. 1–7, 2005. [105] J. Sultana et al., “Dual-Polarized Highly Sensitive Plasmonic Sensor in the Visible to Near-IR Dual-polarized highly sensitive plasmonic sensor in the visible to near-IR spectrum,” Optics Express, vol. 26, no. 23, pp. 30347- 30361, 2018. [106] M. A. Mollah, A. K. Paul and S. M. A. Razzak “Surface Plasmon Resonance based Dual-Polarized Photonic Crystal Fiber Refractive Index Sensor,” 2018 Int. Conf. Adv. Electr. Electron. Eng., pp. 1–4, 2018, Gazipur, Bangladesh. [107] A. A. Rifat, R. Ahmed, G. A. Mahdiraji, and F. R. M. Adikan, “Highly Sensitive D-Shaped Photonic Crystal Fiber Based Plasmonic Biosensor in Visible to Near-IR,” IEEE Sensors Journal, vol. 17, no. 9, pp. 2776–2783, 2017 [108] A. A. Rifat et al., “Photonic Crystal Fiber-Based Surface Plasmon Resonance Sensor with Selective Analyte Channels and Graphene-Silver Deposited Core,” Sensors, vol. 15, no. 5 pp. 11499–11510, 2015. 81 [109] R. K. Gangwar and V. K. Singh, “Highly Sensitive Surface Plasmon Resonance Based D-Shaped Photonic Crystal Fiber Refractive Index Sensor,” Plasmonics, vol. 12, no. 5, pp. 1–6, 2016. [110] A. A. Rifat, G. A. Mahdiraji, Y. M. Sua, Y. G. Shee, R. Ahmed, D. M. Chow, & F. R. M. Adrikan,” Surface Plasmon Resonance Photonic Crystal Fiber Biosensor: A Practical Sensing Approach,” IEEE Photonics Technology Letters, vol.27, no. 15, pp. 1628–1631, 2015. [111] Chao Liu et al., “Mid-infrared surface plasmon resonance sensor based on photonic crystal fibers,” Optics Express, vol. 25, no. 13, pp. 8427–8432, 2017. [112] A. Ullah, M. M. S. Hossain, and M. S. Alam, “SPR Biosensor Based on Microstructured Fiber with Lens Shaped Air Holes,” 2017 IEEE International Conference on Telecommunications and Photonics (ICTP), pp. 26–28, 2017, Dhaka, Bangladesh. [113] B. O. Liedberg, Claes Nylander and Ingemar Lundstrom, “Surface plasmon resonance for gas detection and biosensing*,” Sensors and Actuators, vol. 4, pp. 299–304, 1983. [114] S. Chakma, A. Khalek, B. K. Paul, R. Hasan, and A. N. Bahar, “Gold-Coated Photonic Crystal Fiber Biosensor based on Surface Plasmon Resonance: Design and Analysis,” Sensing and Bio-Sensing Research, vol. 18, pp. 7-12, 2018. [115] S. Islam et al., “A Hi-Bi Ultra-Sensitive Surface Plasmon Resonance Fiber Sensor,” IEEE Access, vol. 7, pp. 79085–79094, 2019. [116] S. Sharmin, A. Bosu and S. Akhtar, “A Simple Gold-Coated Photonic Crystal Fiber Based Plasmonic Biosensor,” 2018 International Conference on Advances in Electronics Engineering, pp. 1–4, 2018, Gazipur, Bangladesh. [117] J. N. Dash and R. Jha, “SPR Biosensor Based on Polymer PCF Coated With Conducting Metal Oxide,” IEEE Photonics Technology Letters, vol. 26, no. 6, pp. 595–598, 2014. [118] S. S. Yee, Jir'ı´ Homola and Gu¨ nter Gauglitz “Surface plasmon resonance sensors: review,” Sensors and Actuators, vol. 54, pp. 3–15, 1999. [119] S. Chu et al., “Design and Analysis of Surface Plasmon Resonance based Photonic Quasi-Crystal Fibre Biosensor for High Refractive Index Liquid Analytes,” EEE Journal of Selected Topics in Quantum Electronics, vol. 25, no. 2 , pp. 1–8, 2018. [120] M. R. Momota, & Hasan, M. R. Hasan, “Hollow-core silver coated photonic crystal fiber plasmonic sensor,” Optical Materials, vol. 76, pp. 287–294, 2018. 82 [121] M. A. Mollah, A. K. Paul, and S. M. A. Razzak, “Dual Polarized Plasmonic Refractive Index Sensor based on Photonic Crystal Fiber,” 2018 10th International Conference on Computer and Electrical Engineering, pp. 73–76, 2018. [122] R. Hasan et al., “Spiral Photonic Crystal Fiber-Based Dual-Polarized,” IEEE Sensors Journal, vol. 18, no. 1, pp. 133–140, 2018. [123] A. Rifat, F. Haider, R. Ahmed, G. A. Mahdiraji, F. R. M. Adikan, and A. E. Miroshnichenko, “Highly sensitive selectively coated photonic crystal fiber-based plasmonic sensor,” Optics letters, vol. 43, no. 4, pp. 891–894, 2018. [124] G. Wang, S. Li, G. An, X. Wang, Y. Zhao, and W. Zhang, “Highly sensitive D-shaped photonic crystal fiber biological sensors based on surface plasmon resonance,” Optical Quantum Electronics., vol. 48, no. 1, pp. 1–9, 2016. [125] Min Liu, Hongtao Yuan, Ping Shun and Xu. Yang, “High-sensitivity birefringent and single-layer coating photonic crystal fiber biosensor based on surface plasmon resonance,” Applied Optics, vol. 57, no. 8, pp. 1883–1886, 2018. [126] A. A. Rifat, G. A. Mahdiraji, Y. G. Shee, J. Shawon, and F. R. Mahamd, " A Novel Photonic Crystal Fiber Biosensor Using Surface Plasmon Resonance,” Procedia Engineering, vol. 140, pp. 1–7, 2016. [127] E. Haque, A. Hossain, F. Ahmed, and Y. Namihira, “Surface Plasmon Resonance Sensor Based on Modified D -Shaped Photonic Crystal Fiber for Wider Range of Refractive Index Detection,” IEEE Sensors Journal, vol. 18, no.20, pp. 8287 - 8293, 2018. [128] S. Islam, J. Sultana, A. Dinovitser, Brian W.-H. Ng, and D. Abbott, “A gold coated plasmonic sensor for biomedical and biochemical analyte detection,” 43rd International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz), pp. 9–10, Nagoya Congress Center, Japan, 2018. [129] A. K. Paul, A. Bakar, S. Rahman, S. M. A. Razzak, and A. K. Sarkar, “Hybrid Cladding Structured Gold Coated Photonic Crystal Fiber Biosensor Based on Surface Plasmon Resonance,” 2nd International Conference on Electrical & Electronic Engineering (ICEEE), pp. 1–4, Rajshahi, Bangladesh, December, 2017. [130] R. Hasan, S. Akter, A. A. Rifat, S. Rana, and S. Ali, “A Highly Sensitive Gold-Coated Photonic Crystal Fiber Biosensor Based on Surface Plasmon Resonance” Photonics, vol. 4, no. 4, pp. 18 2017. 83 [131] M. S. Islam, Slam, J. Sultana, R. A. Aoni, M. S. Habib, A. Dinovitser, Brian W.-H. NG, and D. Abott, “Localized surface plasmon resonance biosensor : an improved technique for SERS response intensification,” Optics Letters, vol. 44, no. 5, pp. 1134–1137, 2019. [132] E. K. Akowuah, T. Gorman, H. Ademgil, S. Haxha “A highly sensitive photonic crystal fibre (PCF) surface plasmon resonance (SPR) sensor based on a bimetallic structure of gold and silver,” 2012 IEEE 4th International Conference on Adaptive Science & Technology (ICAST), Kumasi, Ghana, December, 2012 [133] J. N. Dash and R. Jha, “Graphene Based Birefringent Photonic Crystal Fiber Sensor Using Surface Plasmon Resonance,” IEEE Photonics Technology Letters, vol. 26, no. 11, pp. 1092-1095, 2014. [134] J. N. Dash and R. Jha, “Graphene Based Birefringent Photonic Crystal Fiber Sensor Using Surface Plasmon Resonance,” Plasmonics, vol. 11, no. 6, pp. 1505-1509, 2014. [135] C. Liu et al., “Symmetrical dual D-shape photonic crystal fibers for surface plasmon resonance sensing,” Optics Express, vol. 26, no. 7, pp. 481–490, 2018. [136] R. H. Ritchie, Plasma Losses by Fast Electrons in Thin Films, Phys. Rev. 106, 874, 1957. [137] Ahmmed, R., Ahmed, R., & Razzak, S. A. Design of large negative dispersion and modal analysis for hexagonal, square, FCC and BCC photonic crystal fibers. Paper presented at the Informatics, Electronics & Vision (ICIEV), 2013. [138] Rifat Ahmmed Aoni, Rajib Ahmed, and S. M. Abdur Razzak, Design and Simulation of Duel-Concentric-Core Photonic Crystal Fiber for Dispersion Compensation, CIOMP-OSA Summer Session on Optical Engineering, Design and Manufacturing, 2013. [139] Slavı́k, R., Homola, J., & Čtyroký, J. Single-mode optical fiber surface plasmon resonance sensor. Sensors and Actuators B: Chemical, 54(1), 74-79, 1999. [140] Shigeru Toyama,Akira Ohide,Fedosseeva Olga, Applications of Surface Plasmon Resonance Sensor in Medical Field, IEEJ Transactions on Sensors and Micromachines 121(8):430-433, 2001. [141] Sara Tombelli, Maria Minunni, Marco Mascini, Ronghui Wang, Improved surface plasmon resonance sensor for DNA sensing, Conference: Sensors and Microsystems - 8th Italian Conference, 2004. 84 [142] Dominic Siedhoff, Martin Strauch, Victoria M. Shpacovitch, Dorit Merhof, Unsupervised Data Analysis for Virus Detection with a Surface Plasmon Resonance Sensor, Image Processing, Theory and Applications (IPTA) At: Montréal, Canada, 2017. [143] Kirill Tomyshev, Diana Tazhetdinova, Egor Manuylovich, Oleg Butov, High-resolution fiber optic surface plasmon resonance sensor for biomedical applications, Journal of Applied Physics 124(11):113106, 2018. [144] Xue Tianyu, Weiyuan Liang, Yawen Li, Yuanhui Sun, Y. J. Xiang, Yupeng Zhang, Zhigao Dai, Yanhong Duo, Leiming Wu, Kun Qi, Dr. Shivananju B N, Lijun Zhang, Xiaoqiang Cui, Han Zhang, Qiaoliang Bao, Ultrasensitive detection of miRNA with an antimonene-based surface plasmon resonance sensor, Researchgate,2019. [145] Haidar Jalal Ismail, Theoretical Investigation of Diabetic Urine Detection by Surface Plasmon Resonance Sensor, Optimization Biosensors, 2018 [146] Shpacovitch Victoria, Application of Surface Plasmon Resonance (SPR) for the Detection of Single Viruses and Single Biological Nano-objects, Journal of Bacteriology & Parasitology 03(07), 2012. [147] Nancy Tawil, Edward Sacher, Rosemonde Mandeville, Michel Meunier, Surface plasmon resonance detection of E. coli and methicillin-resistant S. Aureus using bacteriophages, Biosensors & Bioelectronics 37(1):24-9, 2012. [148] Qiaohui Luo, Neng Yu, Chunfei Shi, Xiaoping Wang, Jianmin Wu, Surface plasmon resonance sensor for antibiotics detection based on photo-initiated polymerization molecularly imprinted array, Talanta 161, 2016. [149] Chen Zhou, Haimin Zou, Ming Li, Chengjun Sun, Dongxia Ren, Yong-Xin Li, Fiber Optic Surface Plasmon Resonance Sensor for Detection of E. coli O157:H7 based on Antimicrobial Peptides and AgNPs-rGO, Biosensors & Bioelectronics 117, 2018. [150] Jin Wang, Masaki Muto, Rui Yatabe, Yusuke Tahara, Takeshi Onodera, Masayoshi Tanaka, Mina Okochi Kiyoshi Toko, Highly Selective Rational Design of Peptide-Based Surface Plasmon Resonance Sensor for Direct Determination of 2,4,6-trinitrotoluene (TNT) Explosive, Sensors and Actuators B: Chemical,264, 279-284, 2018. [151] Wenhua Wang, Xinlei Zhou, Shengxu Wu, Sidong Li, Weina Wu, Zhengye Xiong, Wenqing Shi, Xiuyun Tian, Qingxu Yu, Reusable surface plasmon resonance sensor for 85 rapid detection of Cu2+ based on modified-chitosan thin film as an active layer, Sensors and Actuators A: Physical, 286, 59-67, 2019. [152] Sushil Kumar, Gaurav Sharma, VivekSingh, Modelling of surface plasmon resonance sensor for detection of mass concentration of ethanol and methanol in a binary mixture, Infrared Physics & Technology, 67, Pages 190-196, 2014. [153] Aslı Göçenoğlu Sarıkaya, Bilgen Osman, Tülay Çam, Adil Denizli, Molecularly imprinted surface plasmon resonance (SPR) sensor for uric acid determination, Sensors and Actuators B: Chemical, 251, 763-772, 2017. [154] Thi-Dung Tran, Moonil Kim, A Surface Plasmon Resonance Sensor for Detection of Toluene (C₆H₅CH₃), Applied Science and Convergence Technology 2018; 27(6): 184-188, 2018. [155] Takeshi Onodera, Haoyu Luo, Miaomiao Ma, Rui Yatabe, Kiyoshi Toko, Detection of Furfural Using Surface Plasmon Resonance Sensor with Indirect Competitive Method, IEEJ Transactions on Sensors and Micromachines 137(4):121-122, 2017. [156] K. Nanameki, S. Kamata, Determination of benzethonium by using a surface plasmon resonance sensor, Japanese Journal of Forensic Toxicology 18(3):253-260, 2000. [157] J. B. Maurya, Y. K. Prajapati, S. Raikwar, J. P. Saini, A silicon-black phosphorous based surface plasmon resonance sensor for the detection of NO2 gas, Optik,160, 428-433, 2018. [158] Geoffrey J Ashwell, M.P.S. Roberts, Highly Selective Surface Plasmon Resonance Sensor for NO2, Electronics Letters 32(22):2089 – 2091, 1996. [159] Amal Ibrahim Mahmood, Design and Simulation of Surface Plasmon Resonance Sensors for Environmental Monitoring, Conference: IHSCICONF2017, 2018. [160] Vladimir Chegel, Yu.M Shirshov, E.V Piletskaya, Sergey A Piletsky, Surface plasmon resonance sensor for pesticide detection, Sensors and Actuators B Chemical 48(1):456-460, 1998. [161] Jean-Francois Masson, Saome Banerji, Yoon-Chang Kim,Karl S. Booksh, Surface plasmon resonance sensors for industrial applications, Proceedings of SPIE - The International Society for Optical Engineering 5586, 2004. 86 [162] Jiangcai Wang, Weihua Lin, En Cao, Xuefeng Xu, Wenjie Liang, Xiaofang Zhang, Surface Plasmon Resonance Sensors on Raman and Fluorescence Spectroscopy, Sensors 17(12):2719, 2017. [163] Jinru Zhou, Qinqin Qi, Chong Wang, Yifan Qian, Guangming Liu, Yanbo Wang, Linglin Fu, Surface plasmon resonance (SPR) biosensors for food allergen detection in food matrices, Biosensors and Bioelectronics, 142, 111449, 2019. [164] Nurul Hida Zainuddin, Yap Wing Fen, Ali Abdul Khaleq Al Wahib, Mohd Hanif Yaacob, Noriah Bidin , Nur Alia Sheh Omer, Mohd Adzir Mahdi, Detection of adulterated honey by surface plasmon resonance optical sensor, Optik, 168, 134-139, 2018. [165] C Mouvet, R. D. Harris, C. Maciag, B.J.Luff, J.S. Wilkinson, J. Piehler, A. Brecht, G. Gauglitz, R. Abuknesha, G. Ismail, Determination of simazine in water samples by waveguide surface plasmon resonance, Analytica Chimica Acta, 338, 1–2,1997 [166] Yuzhi Chen, Yongqin Yu, Xuejin Li, Zhixin Tan, Youfu Geng, Experimental Comparison of Fiber-Optic Surface Plasmon Resonance Sensors with Multi Metal Layers and Single Silver or Gold Layer, Plasmonics 10,6, 2015. [167] M.R. Hasan, M.I. Hasan, M.S. Anower, Tellurite glass defectcore spiral photonic crystal fiber with low loss and large negative flattened dispersion over S+C+L+U wavelength bands, Appl. Opt. 54, 9456–9461, 2015. [168] E.K. Akowuah, T. Gorman, H. Ademgil, S. Haxha, G.K. Robinson, J.V. Oliver, Numerical analysis of a photonic crystal fiber for biosensing applications, IEEE J. Quantum Electron. 48, 1403–1410, 2012. [169] MD. SAIFUL ISLAM, CRISTIANO M. B. CORDEIRO, JAKEYA SULTANA, RIFAT AHMED AONI, SHILUN FENG, RAJIB AHMED, MOHSEN DORRAKI, ALEX DINOVITSER, BRIAN W.-H. NG, AND DEREK ABBOTT, A Hi-Bi Ultra-Sensitive Surface Plasmon Resonance Fiber Sensor, IEEE Access, 2019. [170] Md. Nazmul Hossen, Md. Ferdous, Md. Abdul Khalek, Sujan Chakma, Bikash Kumar Paul, Kawsar Ahmed, Design and analysis of biosensor based on surface plasmon resonance, Sensing and Bio-Sensing Research 21, 1-6, 2018. 87 [171] Md. Saiful Islam, Mohammad Rakibul Islam, Jakeya Sultana, Alex Dinovitser, Brian W. -H. Ng, Derek Abbott, Exposed core localized surface plasmon resonance biosensor, Journal of OSA B,36,8, 2019. [172] Md. Rabiul Hasan, Sanjida Akter, Ahmmed A. Rifat, Sohel Rana, Kawsar Ahmed, Rajib Ahmed, Harish Subbaraman, and Derek Abbott, Spiral Photonic Crystal Fiber-Based Dual-Polarized Surface Plasmon Resonance Biosensor, IEEE Sensors Journal-18, 2018. [173] Alok Kumar Paul, Ajay krishno Sarkar, Abu Bakar Siddiqur Rahman and Abdul Khaleque, Twin Core Photonic Crystal Fiber Plasmonic Refractive Index Sensor, IEEE Sensors Journal, 2018. [174] Md. Ekhlasur Rahaman, Rekha Shaha, Md. Shamim Ahsan, Ik-Bu Sohn, Design and Performance Analysis of a D-shaped PCF and Surface Plasmon Resonance Based Glucose Sensor, 4th international conference on Electrical Engineering and Information and Communication Technology, 2018 [175] Duanming Li, Wei Zhang, Huan Liu, Jiangfei Hu, and Guiyao Zhou, High sensitivity refractive index sensor based on multi-coating photonic crystal fiber with surface plasmon resonance at near-infrared wavelength, IEEE Photonics Journal, 2017	en_US
dc.identifier.uri	http://hdl.handle.net/123456789/726
dc.description	Supervised by Prof. Dr. Mohammad Rakibul Islam Professor, Department of Electrical and Electronic Engineering, Islamic University of Technology (IUT)	en_US
dc.description.abstract	Many researchers have already proved their excellence in the fields of SPR based PCF sensor research work. In the last years, they have proposed great designs with high amplitude sensitivity. But the challenge for designing is that most of the designs exhibit high sensitivity with high loss or they exhibit low sensitivity with low loss. And most importantly the designs become complex in order to achieve high sensitivity. We tried to remove these restrictions and gain high sensitivity with a low loss in simple design where we succeeded. For our thesis paper, we proposed a circular shaped PCF sensor using the principles of SPR. In our proposed design, we compared between circular, elliptical and rectangular airholes for the same design and explored the best results for further investigation. The proposed design is surrounded by a thin Perfectly Matched Layer (PML). A thin gold layer is used as the plasmonic material. TiO2 layer is also used for better adhesion of the gold layer. COMSOL Multiphysics 5.3a and MATLAB was used for the research work. The technique used for the exploration is Finite Element Method (FEM). The proposed design shows highest confinement loss of 340dB/cm and maximum amplitude sensitivity of 1189.46 RIU-1. The wavelength sensitivity of the design is 13,000 nm/RIU. The design also achieved a sensor resolution of 7.69x10-6 which is remarkable. The investigation process covers a wider range of optical spectrum from 0.59 𝜇m to 1 𝜇m. The Refractive Index (RI) of the proposed design ranges from 1.33 to 1.4. For its high amplitude sensitivity and relatively low loss, the proposed design can be used for medical and bio-chemical research.	en_US
dc.language.iso	en	en_US
dc.publisher	Department of Electrical and Electronic Engineering, Islamic University of Technology,Board Bazar, Gazipur, Bangladesh	en_US
dc.title	Design of a Surface Plasmon Resonance Based Chemical and Bio Molecular Sensor	en_US
dc.type	Thesis	en_US