- IUT Repository Home
- →
- Civil and Environmental Engineering (CEE)
- →
- Thesis
- →
- Graduate
- →
- 2020
- →
- View Item
JavaScript is disabled for your browser. Some features of this site may not work without it.
| dc.contributor.author | Rahman, Mahfuzur | |
| dc.date.accessioned | 2021-01-06T10:03:09Z | |
| dc.date.available | 2021-01-06T10:03:09Z | |
| dc.date.issued | 2020-11-15 | |
| dc.identifier.citation | Alexander, K.M., and Ivanusec I. (1982), “Long term effects of cement SO3 content on the properties of normal and high-strength concrete, Part I. The effect on strength”, Cement and Concrete Research, Vol. 12, No. 1, pp. 51–60. Ali, S.P., Dehghanian, C., and Kosari, A. (2015), “Corrosion protection of the reinforcing steels in chloride-laden concrete environment through epoxy/polyaniline–camphor sulfonate nanocomposite coating”, Corrosion Science, 90, 239-247. Alonso, C., Andrade, C., Novoa, X. R., Izquierdo, D., and Perez, M. C. (1998), "Effect of protective oxide scales in the macro galvanic behavior of concrete reinforcements", Corrosion Science, 40(8), 1379-1389. American Concrete Institute (1996), “Corrosion of metals in concrete”, ACI Committee, ACI 222-96. Ann, K.Y. and Song, H. W. (2007), "Chloride threshold level for corrosion of steel in concrete", Corrosion Science, 49(11), 4113. Andrade, C., and Alonso, C. (2004), "Test methods for on-site corrosion rate measurement of steel reinforcement in concrete by means of polarization resistance method", Materials and Structures, 37(9), 623-643. Andrade. C., and Alanso, C. (2001), “On-site measurements of corrosion rate of reinforcements”, Construction and Building Materials, 15, 141-145. Andrade, C., Soler, L., and Novoa, X. R. (1995), "Advances in electrochemical impedance measurements in reinforced concrete", Materials Science Forum, 192-194, 843-56. Andrade, C.M., Feliu, S., Feliu, J.A., and Feliu, J.S. (1992), “The effects of macrocells between active and passive areas of steel reinforcements”, Corrosion Science, Vol: 33(2), page: 237-249. 96 Andrade, C., and Gonzales, J. A. (1978), "Quantitative measurements of corrosion rate of reinforcing steels embedded in concrete using polarization resistance measurements", Materials and Corrosion, 29, 515-519. Arya, C., and Ofori, F.K. (1996), “Influence of crack frequency on reinforcement corrosion in concrete”, Cement and Concrete Research, 26(3), 345-353. Arup, H. (1983), "The mechanisms of the protection of steel by concrete", Society of Chemical Industry Conference of Reinforcement in Concrete Construction London, 151. Arya, C., and Newman J.B. (1990), "Problem of predicting risk of corrosion of steel in chloride contaminated concrete", ICE Proceedings, 88, 875. ASTM C 192, (2003), "Standard test method for making and curing concrete test specimens in the laboratory", American Society for Testing and Materials. ASTM C39/C39M-16 (2016), “Standard test method for compressive strength of cylindrical concrete specimens”, ASTM International, West Conshohocken, PA. ASTM C 39 (2003), "Standard test method for compressive strength of cylindrical concrete specimen", American Society for Testing and Materials. Balma, J., Darwin, D., Browning, J. P., and Locke, C. E. (2005), "Evaluation of corrosion protection systems and corrosion testing methods for reinforcing steel in concrete", SM Report No. 76, The University of Kansas Center for Research, Inc., Lawrence, KS. Baweja, D., Roper, H., and Sirivivatnanon, V. (2003), "Improved electrochemical determinations of chloride induced steel corrosion in concrete", ACI Materials Journal, 100(3), 228-238. Barneyback., R.S. and Diamond, S. (1981), "Expression and analysis of pore fluids from hardened cement pastes and mortars", Cement and Concrete Research, 11(2), 279. 97 Beshr, H., Almusallam, A. A., and Maslehuddin, M. (2003), "Effect of coarse aggregate quality on the mechanical properties of high strength concrete", Construction and Building Materials, Vol.17, No.2, pp.97-103. Berke, N. S., Aldykiewicz, A. J., and Lianfang, L. (2003), "What's new in corrosion inhibitors? ", Structure, NCSEA, CASE, SEI, 10-12. Bentur, A. (1997), “Steel corrosion in concrete: Fundamentals and civil engineering practice”, E & FN Spon, London. Broomfield, J. P. (1997), “Corrosion of steel in concrete: Understanding, investigation, and repair”, E & FN Spon, London. Berkely, K. G. C., and Pathmanaban, S. (1990), “Cathodic protection of reinforcement steel in concrete”, Butterworths - Heinemann, London. Castellote, M., Alonso, C., Andrade, C., Castro, P., and Echeverria, M. (2001), "Alkaline leaching method for the determination of the chloride content in the aqueous phase of hardened cementitious materials", Cement and Concrete Research, 31(2), 233. Castellote, M., Andrade, C., and Alonso, C. (2002), "Accelerated simultaneous determination of the chloride depassivation threshold and of the non-stationary diffusion coefficient values", Corrosion Science, 44(11), 2409-2424. Cella, P. A., and Taylor, S. R. (2000), "Electrical resistance changes as an alternate method for monitoring the corrosion of steel in concrete and mortar", Corrosion, 56(9), 951-959. Chang, Z.-T., Cherry, B., and Marosszeky, M. (2007), "Polarization behavior of steel bar samples in concrete in seawater part 1: Experimental measurement of polarization curves of steel in concrete", Corrosion Science, In Press, Corrected Proof. Chappelow, C. C., McElroy, A. D., Blackburn, R. R., Darwin, D., Noyelles, F. G. D., and Locke, C. E. (1992), "Handbook of test methods for evaluating chemical deicers", SHRP98 H-332, Strategic Highway Research Program, National Research Council, Washington, DC. Clear, K. C. (1992). "Effectiveness of epoxy-coated reinforcing steel", Concrete International, 14(5), 58-64. Cody, R. D., Cody, A. M., Spry, P. G., and Gan, G. (1996), "Experimental deterioration of highway concrete by chloride deicing salts", Environmental & Engineering Geoscience, II(4), 575-588. CRSI. (1995), "Adhesion loss mechanisms of epoxy coatings on rebar surfaces", Surface Science Western, Concrete Reinforcement Steel Institute, Schaumburg, IL. Darwin, D., Browning, J. P., Ngyuen, T. V., and Locke, C. E. (2002), "Mechanical and corrosion properties of a high-strength, high chromium reinforcing steel for concrete", SD2001-05-F, University of Kansas Center for Research, Inc., Lawrence, Kansas. Demirboga, R., and Gul, R. (2006), "Production of high strength concrete by use of industrial by-products", Building and Environment, Vol.41, No.8, pp.1124-1127. Dhir, R. K., McCarthy, M.J., Zhou, S., and Tittle, P. A. J. (2004), "Role of cement content in specifications for concrete durability: Cement type influences", Structures and Buildings, No. 157, Institution of Civil Engineers, U.K., Vol.157, No.2, pp.113-127. Elsener, B., and Bohni, H, (1992), "Electrochemical methods for the inspection of reinforcement corrosion in concrete structures - field experience", Materials Science Forum, 111-112, 635-647. Feliu, S., Gonzalez, J. A., Andrade, M. C., and Feliu, V. (1988), "Determination of polarization resistance in reinforced concrete slabs", Corrosion, 44(10), 761-765. 99 Feliu, S., Gonzalez, J. A., Escudero, M. L., Feliu Jr., S., and Andrade, M. C. (1990). "Possibilities of the guard ring for electrical signal confinement in the polarization measurements of reinforcements", Corrosion, 46(12), 1015-1020. Feng, Z.S., Chun-hua, L., and Rong-gui, L. (2011), “Experimental determination of chloride penetration in cracked concrete of beams”, International Conference on Advances in Engineering, Procedia Engineering 24, page: 380-384. Gaal, G.C.M. (2004), "Prediction of deterioration of concrete bridges corrosion of reinforcement due to chloride ingress and carbonation", PhD thesis, Technical University at Delft, Delft, Netherland. Gaag, C.R., (2014), “Cement and concrete as an engineering material: An historic appraisal and case study analysis”, Engineering Failure Analysis, Volume 40, Pages 114-140. Glass, G. K., and Buenfeld, N. R. (1997), "The presentation of the chloride threshold level for corrosion of steel in concrete", Corrosion Science, 39(5), 1001-1013. Hansson, C.M., Poursaee, A., and Laurent, A. (2006), “Macrocell and microcell corrosion of steel in ordinary Portland cement and high performance concretes”, Cement and concrete research, vol: 36, page: 2098-2102. Hassoun, M. N., and Al-Manaseer, A. (2008), "Structural concrete: Theory and design", 4th Edition., Canada: John Wiley and Sons, Inc. Hope, B.B., and Alan K.C. (1987), “Corrosion of steel in concrete made with slag cement”, Technical paper, ACI Materials Journal, Title No: 84-M47. Hope, B. B., Page, J. A., and Poland, J. S. (1985), "The determination of the chloride content of concrete", Cement and Concrete Research, 15(5), 863. Hossain, M. (2012), "Securing the environment: Potentiality of green brick in Bangladesh", BUP Journal, Vol.1, No.1, pp.79–89. 100 Kahrs, J. T., Darwin, D., and Locke, C. E. (2001), "Evaluation of corrosion resistance of type 304 stainless steel clad reinforcing bars", University of Kansas Center for Research, Inc., Lawrence, Kan. Kakizaki, M., Edahiro, H., Tochigi, T., and Niki, T. (1992), “Effect of mixing method on mechanical properties and pore structure of ultra-high-strength concrete”, ACI Special Publication, Vol. 132, pp. 997–1016. Kobayashi, K., Takewaka, K. (1984), “Experimental studies on epoxy coated reinforcing steel for corrosion protection”, International Journal of Cement Composites and Lightweight Concrete. 6(2) (1984) 99-116. Kropp, J. (1995), “Relations between transport characteristics and durability”, Rilem Report 12- Performance criteria for concrete durability. State of the art report by Rilem TC 116-PCD. E & FN Spon, p. 65–89. Lamond, J. F., and Pielert, J. H. (2006), "Significance, tests and properties of concrete and concrete-making materials", ASTM International, Vol.10, No. 41, pp. 65–67. Layssi, H., Ghods, P., Alizadeh, A.R., and Salehi, M. (2015), “Electrical resistivity of concrete”, Concrete International. pp. 41–46. Liu, Y., and Weyers, R. E. (2003), "Comparison of guarded and unguarded linear polarization CCD devices with weight loss measurements", Cement and Concrete Research, 33(7), 1093-1101. Lopez, H.Z., Kandratova, I., Bremner, T.W., and Thomas, M.D.A. (2012), “Epoxy-coated bars as corrosion control in cracked reinforced concrete”, Materials and Corrosion. 64(7), 599-608. Li, Z. (2011), “Advanced concrete technology: John Wiley and Sons”, ISBN 9780470902431. 101 Hossain, M., and Abdullah, A.M. (2012), “Securing the environment: Potentiality of green brick in Bangladesh”, BUP Journal, Volume 1, Issue 1, ISSN: 2219-4851. Jovancicevic, V., Bockris, J. O. M., Carbajal, J. L., Zelenay, P., and Mizuno, T. (1986), "Adsorption and absorption of chloride ions on passive iron systems", Journal of the Electrochemical Society, 133(11), 2219-2226. Martinez, S. L., Darwin, D., McCabe, S. L., and Locke, C. E. (1990), "Rapid test for corrosion effects of deicing chemicals in reinforced concrete", SL Report 90-4, University of Kansas Center for Research, Lawrence, KS. Ma, Z.,Duan, Z., and B. (2019), “Effects of an applied load on the chloride penetration of concrete with recycled aggregates and recycled powder”, Advances in Civil Engineering, Volume 2019, Article ID 1340803, 15 pages. Maslehuddin, M., Sharif, M. A., Shameem, M., Ibrahim, M., and Barry, M. S. (2003), "Comparison of properties of steel slag and crushed limestone aggregates", Constr. Build. Material., Vol.17, No.2, pp.105–112. McDonald, D. B., Pfeifer, D. W., and Sherman, M. R. (1998), "Corrosion evaluation of epoxy-coated, metallic clad, and solid metallic reinforcing bars in concrete", FHWA-RD- 98-153, Federal Highway Administration, McLean, VA. Medgar, L. M., Nisbet, M. A., and Van Geem, M. G. (2006), "Life cycle inventory of Portland cement manufacture", PCA Rand Serial No. 2095b. Skokie, IL: Portland Cement Association. Mehta, K. P., and Monteiro, P. J. M. (1993), "Concrete structure, properties, and materials", 2nd Edition, Prentice Hall, New Jersey. Mindess, S., Young, J. F., and Darwin, D. (2003), "Concrete", 2nd Ed., Prentice-Hall Inc., Englewood Cliffs, New Jersey. 102 Miyaji, M., Okazaki, K., and Ochaii, C. (2017), “A study on the use of cyclone shelters in Bangladesh”, 82 (737), 1871-1880, July 2017. Mohammed, T.U., Otsuki, N., Hisada, M., and Tsunenori, S. (2001), “Effect of crack width and bar types on corrosion of steel in concrete”, Journal of Materials in Civil Engineering, 13 (3), 194-201. Mohammed, T. U., Hidenori, H., and Toru, Y. (2001), “Macro-cell and micro-cell corrosions of steel bars in cracked concrete exposed to marine environment”, 5th CANMET/ ACI International Conference on recent advances in concrete technology, Singapore, Vol: Supplementary volume, pp. 155- 169. Mohammed, T.U., Hamada, H., and Yokota, H. (2004), “Macro-cell and micro-cell corrosion of steel bars in cracked concrete made with various cements”, ACI Materials Journal, Vol: 221, page: 51-72. Mohammed, T.U., Otsuki, N., and Hamada, H. (2003), “Corrosion of steel bars in cracked concrete under marine environment”, Materials in Civil Engineering, 15, No.5. Mohammad, T.U., Otsuki, N., and Hamada, H. (2003), “Corrosion of steel bars in cracked concrete under marine environment”, ASCE, Journal of Material in Civil Engineering, 15,460-469,DOI: 10.1061/(ASCE)0899-1561(2003)15:5(460). Mohammed, T.U., Otsuki, N., and Hamada, H. (2003), “Corrosion of steel bars in cracked concrete under marine environment”, Journal of Materials in Civil Engineering, Vol.15, No.5. Mohammed, T. U., Hasnat, A., Sarwar, N., Das, H. K., Miah, J. M., and Awal, M. A. (2011), “Sustainable development of construction works in Bangladesh”, The 3rd International Conference of EACEF (European Asian Civil Engineering Forum), pp. 271– 277. 103 Mohammed, T.U., Otsuki N., Hamada, H., and Yamaji, T. (2011), “Macro-cell and microcell corrosions of steel bars in cracked concrete exposed to marine environment”, 5th CANMET/ACI International Conference on recent advances in concrete technology, Singapore, Supplementary volume, pp. 155- 169. Mohammed, T.U., Hamada, H., Mamun, M.A.A., and Hasnat, A. (2013), “Corrosion of cement paste coated steel bars in marine environment” 3rd International Conference on Sustainable Construction Materials and Technologies (SCMT3). Mohammed, T.U., Ariful, H., Mohammad, A.A., and Shamim, Z.B. (2013), “Recycling of brick aggregate concrete: an extended study on some key issues”, Third International Conference on Sustainable Construction Materials and Technologies (SCMT3). Mohammed, T.U., Hamada, H.,Mamun, M.A.A., and Hasnat, A. (2013), “Corrosion of cement paste coated steel bars in marine environment”, 3rd International Conference on Sustainable Construction Materials and Technologies (SCMT3), Japan. Mohammed, T. U., Hasnat, A., Awal, M. A., and Bosunia, S. Z. (2014), “Recycling of brick aggregate concrete as coarse aggregate”, ASCE Journal of Materials in Civil Engineering, Vol. 27, pp. 1–9. Mohammed, T.U., Khan, A. Z., and Mahmood, A.H. (2015), “Recycling of demolished brick aggregate concrete as coarse and fine aggregates”, International Conference on the Regeneration and Conservation of Concrete Structures (RCCS), Nagasaki, Japan, pp. 1-12. Mohammed, T.U., Khan, A.Z., and Mahmood, A.H. (2015), “Recycling of demolished brick aggregate concrete as coarse and fine aggregates”, International Conference on the Regeneration and Conservation of Concrete Structures (RCCS), Nagasaki, Japan, pp. 1-12. Mohammed, T.U., Masud, M.M.U., Rahman, M., and Mamun, M.A.A. (2019), “Effects of cement types on chloride ingress in concrete”, The 3rd ACF Symposium, Hokkaido University, Japan. 104 Nanayakakkara, O., and Kato, M. (2009), “Macro-cell corrosion in reinforcement of concrete under non-homogeneous chloride environment”, Journal on Advanced Concrete Technology. 7(1), 31-40. Nygaard, P., and Geiker, M. (2005), "A method for measuring the chloride threshold level required to initiate reinforcement corrosion in concrete", Materials and Structures, 38(4), 489-494. Page, C. L., and Vennesland, Q. (1983), "Pore solution composition and chloride binding capacity of silica-fume cement pastes", Materiaux Et Constructions, 16(91), 19. Popovics, S. (1990), "Analysis of the concrete strength versus water-cement ratio relationship", ACI Materials Journal, Vol.87, No.5, pp.517–529. Price, W., Jones, M., Ting, S., and Dhir, R. (2003) “Effect of aggregate porosity on chloride ingress into concrete”, Proceedings of the International Symposium dedicated to Professor Surendra Shah, Northwestern University, USA held on 3–4 September 2003 at the University of Dundee, Scotland, UK. Pyc, W., Weyers, R. E., Sprinkel, M. M., Weyers, R. M., Mokarem, D. W., and Dillard, J. G. (2000), "Performance of epoxy-coated reinforcing steel", Concrete International, 22(2), 57-62. Ramezanianpour, A.A., Ghoreishian, S.A.H., Ahmadi, B., Balapour, M., and Ramzezanianpour, A.M., (2018), “Modelling of chloride ions penetration in cracked concrete structures exposed to marine environment”, International Federation for Structural Concrete, 1-12. Relim (1988), “Corrosion of steel in concrete. State of the art report”, Committee 60-CSC, Chapman & Hall, London. 105 Rixom, R., and Mailvaganam, N. (1999), "Chemical admixtures for concrete", 3rd Ed., Taylor and Francis, E and FN Spon. Rodríquez, P., Ramirez, E., and Bonzales, J. A. (1994), "Method for studying corrosion in reinforced concrete", Concrete Research Magazine, 46(167), 81-90. Sarker, D. (2015), "Reduction of carbon emission by using green bricks: Bangladesh perspective", International Journal of Engineering Trends and Technology, Vol.24, No.1, pp.15–20. Sagues, A. A., Powers, R. G., and Kessler, R. (1994), "Corrosion processes and field performance of epoxy-coated reinforcing steel in marine structures", Corrosion 94, National Association of Corrosion Engineers (NACE), Houston, TX, Paper number 229. Sehgal, A., Kho, Y. T., Osseo-Asare, K., and Pickering, H. W. (1992), "Reproducibility of polarization resistance measurements in steel-in-concrete systems", Corrosion, 48, 706- 714. Sofia, R., and Bogas, J.A., (2018), “Chloride ingress into structural lightweight aggregate concrete in real marine environment”, Marine Structures, 61, 170–187. Schulze, J. (1999), "Influence of water-cement ratio and cement content on the properties of polymer-modified mortars", Cement and Concrete Research, Vol.29, No.6, pp.909–915. Sizov, V. P. (1997), "Effect of sand content in concrete and aggregate size on cement consumption and strength of concrete", Hydrotechnical Construction, Vol.31, No.3, pp. 194–196. Schwensen, S. M., Darwin, D., and Locke, C. E. (1995), "Rapid evaluation of corrosion resistant concrete reinforcing steel in the presence of deicers", SL Report 95-6, University of Kansas Center for Research, Inc., Lawrence, KS. 106 Senecal, M. R., Darwin, D., and Locke, C. E. (1995), "Evaluation of corrosion-resistant steel reinforcing bars", SM Report No. 40, University of Kansas Center for Research, Inc., Lawrence, KS. Song, H.-W., and Saraswathy, V. (2007), "Corrosion monitoring of reinforced concrete structures - a review", International Journal of Electrochemical Science, 2, 1-28. Soleymani, H. R., and Ismail, M. E. (2004), "Comparing corrosion measurement methods to assess the corrosion activity of laboratory OPC and HPC concrete specimens", Cement and Concrete Research, 34(11), 2037. Stern, M., and Geary, A. L. (1957), "A theoretical analysis of the shape of polarization curves", Journal of the Electrochemical Society, 104, 56. Smith, J. L., Darwin, D., and Locke, C. E. (1995), "Corrosion-resistant steel reinforcing bars", SL Report 95-1, University of Kansas Center for Research, Inc., Lawrence, KS. Smith, J. L., and Virmani, Y. P. (1996), "Performance of epoxy-coated rebars in bridge decks", FHWA-RD-96-092, Federal Highway Administration, McLean, VA. Su, J. K., Cho, S. W., Yang, C. C., and Huang, R. (2002), "Effect of sand ratio on the elastic modulus of self-compacting concrete", Journal of Marine Science and Technology, Vol.10, No.1, pp.8–13. Tuutti, K. (1982), “Corrosion of steel in concrete”, Swedish Cement and Concrete Research Institute, Stochkolm. Videm, K. (2001), "Phenomena disturbing electrochemical corrosion rate measurements for steel in alkaline environments", Electrochimica Acta, 46(24-25), 3895-3903. Viedma, P. G., Castellote, M., and Andrade, C. (2006), "Comparison between several methods for determining the depassivation threshold value for corrosion onset" Journal of Physique IV, 136, 79-88. 107 Wassermann, R., Katz, A., and Bentur, A. (2009), "Minimum cement content requirements: a must or a myth", Materials and Structures, Vol.42, No.7, pp.973–982. Weyers, R. E., Sprinkel, M. M., Pyc, W., Zemajtis, J., Liu, Y., and Mokarem, D. W. (1998), "Field investigation of the corrosion protection performance of bridge decks and piles constructied with epoxy-coated reinforcing steel in virginia", VTRC 98-R4, Virginia Transportation Research Council, Charlottesville, VA. Wipf, T. J., Phares, B. M., and Fanous, F. S. (2006), "Evaluation of corrosion resistance of different steel reinforcement types", CTRE Project 02-103, Center for Transportation Research and Education, Iowa State University, Ames, IA. | en_US |
| dc.identifier.uri | http://hdl.handle.net/123456789/780 | |
| dc.description | Supervised by Dr. Md. Tarek Uddin, PEng. Professor Department of Civil and Environmental Engineering Islamic University of Technology Board Bazar, Gazipur 1704 | en_US |
| dc.description.abstract | Chloride-induced corrosion of reinforced concrete structures is one of the main reasons of deterioration of concrete structures in the marine exposures. A detailed investigation was carried out to compare macro-cell, micro-cell corrosion progress and chloride ingress in concrete made with different types of aggregates, such as recycled brick aggregate (RBA), fresh brick aggregate (BA) and stone aggregate (SA) as coarse aggregate. As fine aggregate natural river sand (NS) and recycled brick fine aggregate (RBFA) were used. CEM Type I (Ordinary Portland Cement (OPC)) was used as binding material. Cement contents were 340 and 400 kg/m3. W/C ratios were 0.45 and 0.55. For investigation, reinforced specimens were made. As reinforcement both deformed bars and epoxy coated bars were used for investigation. Both cracked and un-cracked specimens were investigated. A total 16 cases was investigated. The cracked prism specimens were splashed with natural seawater one in a day. Un-cracked cylindrical specimens were submerged in 3% NaCl solution of temperature 400C for 180 days. The cylindrical specimens were cut to collect concrete samples from the depths of 0-10, 10-20, 20-30, 30-40 and 40-50 mm. Chloride profiles in concrete were evaluated by titration with AgNO3 solution at 120 and 180 days of exposure. The recycled brick aggregate showed the highest level of chloride ingress compared to the other aggregates. The rate of macro-cell corrosion with respect to the type of aggregate is ordered as recycled brick aggregate (RBA) > fresh brick aggregate (BA) > stone aggregate (SA). It was also observed that chloride ingress as well as corrosion formation rate reduces with the increase of cement content and decrease of W/C ratio. No significant amount of corrosion was observed for the cases with epoxy coated bars. | en_US |
| dc.language.iso | en | en_US |
| dc.publisher | Department of Civil and Environmental Engineering, Islamic University of Technology, Gazipur, Bangladesh | en_US |
| dc.title | Chloride Ingress and Corrosion of Steel Bars in Reinforced Concrete Made with Different Aggregates | en_US |
| dc.type | Thesis | en_US |
Files in this item
This item appears in the following Collection(s)
-
2020 [2]