• Circular Economy Dynamics in Bangladesh: A Cross-Industry Analysis of Sustainable Practices and Trends 

  Kaifa, Ismat Ara (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-06-25)

  The concept of a circular economy (CE) signifies transformation. The transformation is from a traditional take-make-dispose to a reduce-reuse-recycle model. This model emphasizes resource efficiency and waste reduction. ...
• Experimental study on health monitoring of ball bearing by analyzing the sound level 

  Chowdhury, Md. Jawad Rahman; Almas, Aarik (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-08-15)

  This study explores a novel approach to ball bearing health monitoring analyzing sound level. Ball bearings are crucial components in machinery, but they are prone to problems like pitting, misalignment, fatigue etc. These ...
• Circulating Tumor Cell Separation using Circular Reverse Wavy Channel: A Numerical Approach 

  Jabir, Ahmad; Rahman, Hamedur; Rafi, Rashid Naib (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-09-19)

  Early cancer detection is vital for the survival of a patient suffering from cancers of various types. A study done by the national census for the UK showed that the survival rates of patients suffering from Bowel, ...
• A Numerical Investigation on Heat Transfer Characteristics for Different Radiator Designs with Nanofluid Coolants 

  Salsabila, Saraban; Julfikar, MD Yousuf (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-07-04)

  This thesis presents a comprehensive numerical investigation into the heat transfer characteristics of different radiator designs using nanofluid coolants. The study focuses on evaluating and comparing the thermal ...
• Assessing the Ceramic Industry for Sustainable Supply Chain Management in Bangladesh: An Insight Using the Fuzzy DEMATEL Method 

  Syeed, Mohammad Khalid Bin; Faisal, Farhan; Alvee, Abdullah Al Muhid (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-06-23)

  This study looks closely at Bangladesh's ceramic industry's sustainable supply chain management. It analyzes the intricate cause-and-effect relationships that affect sustainability using the Fuzzy Decision Making Trial ...
• Reducing Food Wastage and Enhancing Restaurants' Operation in Dhaka City: A Data Driven Strategy For Pizza Demand Forecasting Using Machine Learning 

  Sazid, Tawhidul Islam; Nabil, Abdullah Al; Muhib, MD. Hasin Al (2024-07-02)

  In the framework of many pizza businesses in Bangladesh, this thesis examines the crucial problems of food waste. The study adopts a broad strategy to enhance demand forecasting by combining machine learning techniques ...
• Comparative Analysis of a novel Cascade Transcritical Carbon Dioxide cycle and Split Transcritical Carbon Dioxide cycle integrated with Advanced Absorption Refrigeration system 

  Arshil, Tahamid; Ahmed, Estiak (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-07-09)

  A transcritical carbon dioxide (t-CO2) Rankine cycle is capable of achieving high efficiency for waste heat recovery (WHR) from a gas turbine, despite being simpler and more compact than a steam/water cycle. Regarding ...
• Hybrid Grey Wolf Algorithm Development and Analysis for Effective Multi Objective Optimizat 

  Azad, Md Fahim Tanvir; Kawsar, Rifat Bin (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-07-07)

  This thesis presents an innovative approach to multi-objective optimization in industrial processes by hybridizing the Grey Wolf Optimizer (GWO) algorithm with Grey Relational Analysis (GRA). The study aims to enhance ...
• Compressive Strength Analysis of a Conventional and a Bio-Inspired 3D Printed Honeycomb Structure 

  Mahdi, Jawad; Jahan, Syoda Anamika; Tawassaf, Serniabat Wasit (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-06-24)

  This study introduces a novel bio-inspired honeycomb structure inspired by the intricate design of a coral skeleton. In contrast to conventional honeycomb structures, this innovative design reinforces the core with ...
• A Portable Seat Design for Rickshaw: Improving The Passenger Comfort against Excessive Jerking on The Road 

  Hamid, Alvee Jawad Bin; Hasan, Syeda Tahsina; Rabbi, M. Abrar Faiyaz (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-07-31)

  Passengers who travel in rickshaws in Bangladesh often face serious issues due to the uncomfortable sitting arrangements which can cause pain, health hazards from prolonged vibration exposure. Due to these vibration on ...
• Leaves to Energy: A Comprehensive Study on Biogas Production from Fallen Leaves 

  Shahriar, Tarif; Bhuiyan, Md Shahriar Hossain; Matin, Alif Rafee Ibn (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-06-23)

  An experimental inquiry into the production of biogas from fallen leaves gathered on Islamic University of Technology (IUT) campus is presented in this paper. Five distinct leaf species were chosen as biogas production ...
• Development of an Effective Neck Injury Protection System for High-Speed Car Racing 

  Zawad, Md. Asif; Ilham, Tahia (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-07-30)

  High-speed racing car crashes can lead to neck injuries for drivers, particularly in frontal impacts. Current neck protective systems often prioritize protection over comfort, which can restrict driver mobility and ...
• Application of lean manufacturing in a small-scale manufacturing plant for performance enhancement 

  Hassan, Moho; Arefin, Nowshad (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-06-12)

  This study evaluates the readiness of Esabah Enterprise, a small-scale manufacturing plant in Bangladesh, to implement lean manufacturing techniques. The primary objectives are to assess employee engagement, performance ...
• Selection and Implementation of Biological Treatment Methods for Recycling Wastewater in the RMG Industry 

  Sayeed, Abdullah Al; Islam, MD. Sakibul; Sakib, MD. Saiman (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-07-02)

  Bangladesh's economy is predominantly based on the ready-made garment (RMG) industry. Along with producing enormous quantities of revenue, it also produces a lot of effluent that is contaminated by both organic and ...
• Integration of Diffuser Augmented Wind Turbine on Automobiles for Power Generation: A Novel Approach towards Sustainable Mobility 

  Naim, Naimur Rahaman; Islam, Md. Minhazul (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-06-07)

  Wind energy, a promising form of renewable energy, has evolved from basic windmills to complex wind turbines, playing a significant role in global energy supply. Innovations in wind turbine technology have led to exploring ...
• Numerical Validation of a Robust Positioning Controller in Machine Tools Application 

  Youssef, Vepouyoum Njouokouo; Mukaddas, Aminu Muhammad; Naji, Abdul Malek Thabet; Rook, Mohammed K A (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-06-27)

  Cutting force and friction force are two disturbance forces that directly affect the servo drive system during the milling process, causing a negative effect that reduces the positioning table’s precision. To maintain ...
• Numerical Evaluation to Analyze the Techno-Economic Feasibility of Supercritical CO2 Driven Concentrating Solar Power (CSP) Plant in Bangladesh 

  Prima, Kazi Refaya Noshin; Sevidzem, Wirba Aisha; Gaye, Amie (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-07-11)

  This study presents a techno-economic feasibility of supercritical CO2-driven Concentrated Solar Power (CSP) technologies in Bangladesh, with a focus on both solar tower and parabolic trough collectors. The study is ...
• Numerical Analysis of Tracking Performance in Machine Tools for Disturbance Forces Compensation Using PID And NPID Controller 

  Mansoor, Abdulsalam; Khmees, Abdulfatah; Elser, Mogtaba (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-07-12)

  In modern production, machine tool precision and reliability are critical for producing high quality goods. To meet these objectives, numerous new controllers and control algorithms have been developed, taking use of ...
• Thermal Analysis of Double Effect Absorption System Cascaded with Ejector and Enhanced Vapor Compression Refrigeration Cycle 

  Siddique, Sefat Mahmud; Uzzaman, Md. Muhtasim (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-07-04)

  The traditional Double Effect Absorption Refrigeration Cycle (DE-ARC) series and parallel configuration cascaded with the conventional Vapor Compression Refrigeration (VCR) technology solves the limitations faced with ...
• Modeling and sensitivity analysis of a PEM fuel cell with waste heat recovery via zeotropic mixture in Organic Rankine cycle 

  Mishi, Ruqaiya Islam; Islam, Nazmus Shameer; Arif, Md. Ar Rafi Bin (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2024-09-02)

  This study investigates the utilization of Proton Exchange Membrane Fuel Cells (PEMFC) in conjunction with Organic Rankine Cycle (ORC) systems to recover waste heat. It utilizes zeotropic mixes to enhance efficiency. The ...

View more