Browsing Undergraduate by Title

Browsing Undergraduate by Title

Sort by: Order: Results:

  • Mass Production of Microalgae Using Low Cost Photobioreactor 
    Reza, Md. Asif; Rahman, Mohaimin (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    We are using fossil fuels as the main source of energy for a long time. As fossil fuels are harmful for its greater C2 emission and are also a limited source of energy they can’t be used as a main source of energy forever ...
  • Mechanical Properties of Composite Material Made of Natural Fibers 
    Khan, Iftakhar Hydar; Rabbani, Nihon (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    A composite material is a material which is composed of two or more materials. There are various kinds of composite materials. Among them, the natural fiber reinforced composite materials are notable as they are more ...
  • Micro-Hydro Power plant Design by Harnessing Wave Energy with ‘Searaser’- A Case Study For Saint Martin’s Island 
    Shahriar, Tanvir; Zaman, Mohammad Shahrear; Hossain, Asif (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    Electricity, the most suitable and convenient form of energy for transmission and usage purpose is the key to the development for a country. The demand of electricity in an underdeveloped country like Bangladesh is increasing ...
  • Microcontroller Based Temperature Sensor and Data Logger 
    Uddin, Kazi Ahsan; Arafat, Yeasir (2012-11-15)
    The average temperature during summer season in Bangladesh is quite high. The food industries & houses are exposed to excess heating not only due to the cooking temperature but also by cooking appliances and there‟s always ...
  • Minimization of Shrinkage Defect in Crankshaft Casting 
    Abubakar, Zayyad; Ullah, Najeeb (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    In our present study, we mainly focused on the reduction of the casting and moulding defects that mainly occurs during metallurgical process and we are able to depict some of those severe problems that might hamper the ...
  • Mobile Phone Automobile Security System (MASS) 
    Hossain, Mehedi (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    A car security system has become an essential part for all car users as it ensure safety to the properties car. The purpose of this project is to develop a car security system that is cheap and can be controlled by ...
  • Modal & Fatigue Analysis of Different Blade Profiles of Axial Flow Turbine 
    Rad, Shihabus Sakib; Akram, Md. Saleh (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    The profile shapes of axial turbine blades need to fulfil the requirements of not only aerodynamics but also mechanical criteria. A design requires aerodynamically favorable velocity distribution as well as mechanically ...
  • Model and Implementation of Supply Chain Management of Ready-Made Garments in Bangladesh Integrating Quick Response(QR) Code 
    Polok, Eftekhar Masum; Rahman, Tamzid (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
  • Modelling of NOx and SOx emission: A CFD case study in a small-scale furnace 
    Noor, Faria; Sarwar, Rezwana; Khan, Musarrat (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    A CFD case study was done to learn the impact of Flue Gas Recirculation in a horizontal axis small scale furnace. Flue Gas Recirculation was performed to seehow the emissions are affected with a change in recirculation ...
  • Molecular Dynamics Simulation of Two Dimensional Materials 
    Hezam, Ahmad Fatehi Ali Mohammed; Haider, A.S.M. Redwan (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-06-06)
    Ultra-thin materials like Graphene and Transition Metal dichalcogenides are a novel class of materials with robust applications in electronic devices. These 2D materials are one of the main driving forces behind the rise ...
  • Multi Objective Optimization of Turning Process Using Whale Algorithm 
    Tanvir, Mahamudul Hasan; Hussain, Afzal; Rahman, M.M. Towfiqur; Zishan, Khandoker; Ishraq, Sakib (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    This work is the optimization of machining parameters in steel turning operation. In this study, the experimental work was carried out by turning Stainless Steel 304 by using carbide inserts. There were three main purposes ...
  • Multi Objective Performance Optimization & Thermodynamic Analysis of Advanced Supercritical CO2 Power Cycles for CSP Using ANN & Genetic Algorithim 
    Turja, Asif iqbal; Hasan, Md. Mahmudul (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
  • Nanofluid Implementation in Heat Exchanger Geometries 
    Ahmad, Foyez; Mahmud, Sajjad (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-06-07)
    In recent years, nanotechnology has evolved as an important field that employs sophisticated "green" nanoparticles incorporated in conventional engineering resources. The heat transfer performance of nanofluids is superior ...
  • Noise Attenuation by Helmholtz Resonators Attached to a Duct 
    Mahmud, Md. Amin; Sameen, Zahin (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    The resonating frequency and the transmission loss due to two 1-DOF cylindrical Helmholtz resonator attached to a duct is thoroughly investigated in this literature to attenuate low frequency noise using finite element ...
  • Noise Cancellation for Small Type Generators 
    Mahdin, Saimum; Haque, Mahiul; Rafsan, Shafwat Kabir; Anjum, Tanvir; Rahman, Md.Tashrik (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    A simple, effective design for enclosing portable generators to reduce the radiated noise is an idea that seems to be desired by the consumers in this market. This investigation is to determine the feasibility of producing ...
  • A novel curved-corrugated channel: Thermal-hydraulic performance and design parameters with nanofluid 
    Ahamed, Rifat; Nusrat, Maisha (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
    In the present study, the impact of nanofluids has been analyzed in a corrugated channel with baffles. The primary objective of this study is to evaluate the thermodynamic performance of both single and hybrid nanofluids ...
  • Numerical Analysis for Enhancing the Performance of a Shell and Helical Coiled Tube Heat Exchanger bt adding Continuous Fin, Discontinuous Fins,and Annular Fins on the Coiled Tube 
    Majmader, Fawaz Bukht; Eazdani, Musfique (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
  • Numerical Analysis of Film Cooling on Gas Turbine Blades 
    Rohit, Rifat Bin Alam; Sultan, Zawad; Rahul, SK Tashowar Tanzim; Hridoy, Ibrahim Hossain (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    Various papers and research works regarding film cooling performance were studied. Parameters, conditions and geometry factors that affect the film cooling effectiveness were analyzed. The objective was to see how modifications ...
  • Numerical Evaluation of Thermal Hydraulic Performance in Compact Heat Exchangers with Vortex Generator 
    Abir, Md Atrehar; Bhuiyan, Abdul Aziz (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    The improvements in heat exchanger performance have long attracted many researchers as they are of great technical, economic, and ecological significance. The performance of the fin-and-tube heat exchanger (FTHE) can be ...
  • Numerical Investigation of a Hybrid Photovoltaic Thermal PVT Module 
    Chowdhury, Taspia Shawkat; Mita, Mita Noor Hasan; Mohsin, Fatima Tasneem (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-31)
    Over 173,000 terawatts of solar radiation continuously strike the Earth’s atmosphere however, most of this energy is reflected or absorbed and is lost due to insufficient space and technology required to harness the ...

Search IUT Repository


Advanced Search

Browse

My Account