Browsing Undergraduate by Title

Browsing Undergraduate by Title

Sort by: Order: Results:

  • Pneumatically Operated Push on Capping System 
    Imran, Tushar (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    Automation is constantly making significant impact on many industries other than manufacturing. Automation has been taking over the manual operations that have been carried out in the industries for centuries. By reducing ...
  • Power Generation from Rice Husk 
    Anando, Ahmed Imtiaz (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-31)
    The alarming rate at which the deposit of non-renewable or fossil energy resources are depleting around the whole world has been nudging us in the direction of green energy for quite a long time. Considering the upcoming ...
  • Prediction and Optimization of Surface Roughness by Desirability Analysis 
    Ullah, S M Tawfiq; Khan, Ragib Ishraq; Rahman, Md. Mahfujur (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    This project deals with the prediction and optimization of surface roughness by desirability approach. There are some machining parameters that have significant effects on the surface of a metal and cause surface roughness. ...
  • Prediction of Fracture Behavior by Image Processing 
    Javed, Asif (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    The failure of structure leads to the loss of money but more importantly, the loss of life. Failures occur for many reasons, including uncertainties in the loading or environment, defects in the materials, propagation of ...
  • Preventive maintenance of automobile 
    Elgrashi, Abdalla; Hussein, Abdulraqeb; Nur, Muhamad Hussein (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
  • Production and Combustion Analysis of Microalgae-based Biodiesel 
    Amin, Md.Sameeul; Bari, A.B.M Najmul (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
    For over the past century, traditional fossil fuel has been the life force of modern society. However, with rising sea-levels and the impending global climate crisis, the entire world and especially tropical countries ...
  • Production of activated carbon and extraction of Silicon carbide from rice husk 
    Masum, Md. Shah; Foysal, Najmus Sakib (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    The abundance and availability of rice husk, an agricultural waste, make them as a good source for precursor of activated carbon and silicon carbide. The present work entitle “Production of Activated Carbon and Extraction ...
  • Production of Bio-Fuel & Bio-Plastic from Vegetable Waste as a Sustainable Waste Management 
    Turag, Md. Morsalin; Rajib, Md. Rayhan Uddin (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    Enlargement of different sectors like industrial, automobile etc. Depends upon the progressive demand of petroleum. Most of the petroleum are commonly known as Hydrocarbon. In Bangladesh, a huge amount of fuel needs to run ...
  • Production of Biodiesel from Microalgae Collected from Ponds 
    Shakib, Mahmudul Alam; Rahat, Md. Sazzadul Alam (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    In this paper, authentic empirical informations on the production of biodiesel from different species of microalgae have been demonstrated after a series of extensive experimentations and research. Two different species ...
  • Production of biogas by anaerobic digestion process and process simulation 
    Khan, Muhammad Nazmul Hasan; Baky, Md. Abdullah Hil (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    The objective of the paper is to study the production of biogas from an existing biogas plant using food waste. As food waste only rice is used. Also process simulation of methane production and comparison of simulated ...
  • Productivity and quality enhancement through implementation of Total Productive Maintenance (TPM) in a manufacturing plant 
    Rashid, Md. Mynur; Alam, Rabiul (IUT, MCE, 2016-11-20)
    Plant and equipment maintenance is a vital issue in manufacturing. The cost of regular maintenance might be low but the major breakdown of a machine can halt the entire production line. On the other hand effective machine ...
  • Prospect of solar irrigation system over conventiona l irrigation system 
    Matin, Md.Abdullah Al (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    Bangladesh is a third world country with less economic growth. About 36% (Rahimafrooz) of GDP and 64% (Rahimafrooz)of its employment comes from agriculture. But our agricultural history is declining due to lack of ...
  • Radioactive Analysis of Magneto hydrodynamic (MHD) Micro-pump 
    Abid, Abyaz (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
    This study aims to investigate blood-based hybrid nanofluids in a Magneto-hydrodynamic (MHD) micropump for biomedical applications. The study examines three blood-based bio-convective radiating hybrid nanofluids (Ti2O, ...
  • Redesigning of a warehouse facility layout for improving the inventory management system: a case study 
    Razee, Syed Muqsit (IUT, MCE, 2016-11-20)
    Warehouse layout is a classical production problem in engineering environment. Warehouse design often has a significant impact on the performance of a manufacturing plant. In modifying the warehouse floor layout, main issue ...
  • Reduction of Vibration of Drill Bucket Using Absorber 
    Sadman, Riasat; Khan, Md. Robius Sunny (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
  • Remote Controlled Lawn Mower 
    Abdi, Abshir Hassan Mohamud; Elsadig, Ayman; Ali, Abubakar Isak; Ali, Abdullah Mabkhot; Khawari, Ahmad Shuaib (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    The remote-controlled solar-powered lawnmower has been developed to reduce the amount of work required of humans in trimming the lawn. Due to the increased availability of sophisticated equipment, our work has become more ...
  • Renewable energy in Afghanistan 
    Nazari, Samiullah (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    Energy is as a soul necessary and a prerequisite in communities. It’s lead to growth the economic it can exist a strength relationship among the communities and makes unity between them. Energy can be use in various type ...
  • Review of Renewable Energy Projects in Bangladesh 
    Daiyan, Md. Mahir Abdud; Ahmad, Al-Rafin (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    Energy is one of the basic needs of the present human civilization. Without energy a nation can not be developed. All the developed countries in the world have the adequate power generation. But in the developing and third ...
  • A Review of the Technologies for Wave Energy Conversion 
    Mahatab, Fardin (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    The primary objective of this article is to provide a comprehensive overview of the wave energy extraction techniques currently in use. The overview will describe the potential of wave technologies as well as their ...
  • A review study on vortex generators 
    Tasnim, Nafisa; Anjum, M Raseed (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-11-15)
    This paper presents a review on the heat transfer increase and reduction in pressure drop for compact heat exchangers (CHXs) by using protrusion of surfaces in the form of surfaces in the form of vortex generators (VGs). ...

Search IUT Repository


Advanced Search

Browse

My Account