Browsing Undergraduate by Title

Browsing Undergraduate by Title

Sort by: Order: Results:

  • Rice Husk Ash Concrete: Study with Experimental and Theoretical result of Compressive Strength and Other Characteristics 
    Uday, Sultan Ul Iffat; Rahman, Ishfaqur (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    This book presents a study on the development of the physical properties of Portland cement by using rice husk ash (RHA) as a supplementary material instead of cement, where RHA from the local paddy milling industry in ...
  • Room Acoustic Parameters of an Auditorium using Ray Tracing Method 
    Antar, Abrar MD Mubashshir; Maruf, Md. Mesbahul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    Sound quality is important for concert halls, seminar room even in room of house too. Ray acoustic is used in simulating the high frequency limit when the wavelengths is smaller than the geometrical features. The ray ...
  • Sensitivity and performance analysis of a comprehensive PEM cell model and fuel cell based renewable autonomous RHFC system for Saint Martin Bangladesh 
    Tamim, Tahmidur Rahman; Chowdhury, Mohammed Arman; Sarkar, Shakhawat Hossain (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
    Providing uninterrupted electricity to remote regions, such as Saint-Martin Island, that have a high potential for renewable energy sources but lack a large-scale grid connection is a formidable challenge. Such ...
  • Simulation and comparison of heat flow through rectangular and cylindrical fins by ANSYS 
    Rahman, Md. Anisur; Zubaer, Nazran; Rizvan, Ratul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Heat generation has been a common phenomenon in different mechanical machines. Heat dissipation system thus has become more and more important for better performance and smooth running of the machine. The dissipation has ...
  • Solar Thermal Powered Steam Turbine Power Plant 
    Mohammed, Sami Hamid (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
  • Study and comparison of mechanical properties between scrap recycled steel and ship recycled steel. 
    Al-Noor, M. Sadik; Shuvo, Safayet Hossen; Khan, Tausif (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)
    Steel is the most recycled metal in the world and it is impossible to imagine life without steel. It must be recycled maintaining its proper quality and contributing to economy. Scrap recycling and ship recycling are two ...
  • Study and construction of a single person fuel efficient light weight vehicle and the feasibility of biogas as an alternative fuel 
    Rabbani, G. M.; Erfanullah, A. H. M.; Islam, Mir Thaufeequl; Abdullahi, Ahmed Md. (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    All around the world, the modern civilization is trying to harness as much energy as possible from renewable energy resources. Faced with the threat of depletion fossil based fuel and the negative effects of using fossil ...
  • Study of a Convective Heat Transfer for Laminar and Turbulent Flow of Nano-fluid through a Circular Pipe 
    Mehmood, Aqib; Ismail, Motapon Njikam; Ndiaye, Babacar (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2015-11-15)
  • Study of Automotive Battery Recycling and Development of a Sustainable Method 
    Rumi, Syed Shah Itqan; Hossain, Md. Nahid; Abdullah-Al-Mahtab, Md.; Hassan, Mettaul (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    Lead-acid batteries are most widely used automobile batteries all over the world. Many waste batteries are thrown away every year. But the fact is that lead is only found in nature and therefore it has limited supply. Also, ...
  • Study of Combustion of a Biofuel Innovation in Combustion Engines Internal Vehicles 
    Abushibh, Dhiaa Yahya Ali; Mojaly, Hassan Mohammed Ahmed (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
  • Study of Effect of Different Burnishing Conditions on Surface Roughness for a Flexible Burnishing Tool 
    Hossain, Tapos; Tuser, Md. Towkir Ahmed; Ovy, S.M. Al Islam (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2015-11-15)
    Burnishing is a very simple and effective method for improvement in surface finish and can be carried out using existing machines, such as lathe. Quality of Surface is an important factor to decide the performance of a ...
  • Study of environmental pollution by Petrol engines 
    Mohammed, Hammam Ali; Idris, Abdullahi; Mohammed, Abdallah (IUT, MCE, 2016-11-20)
  • Study of ergonomics and design of a driving seat in a vehicle considering ergonomics 
    Mandol, Saleh Ahmed Shibly; Shams, Md. Hasibul; Anik, A.T.M. Farhan Sadiq (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Automotive seats need to accommodate a wide range of driver sizes over relatively long periods of time and provide isolation from vehicle vibration and shock. To fulfill these requirements, there have been remarkable ...
  • Study of Fuel Consumption and GHG Emission of Motorcycles in Dhaka to Offset Pollution by Use of an Alternative Biofuel 
    Anindo, Muhaimin Wasif; Shefat, Md Khaledun Newaz; Abtahi, MD. Mustakim (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-05-30)
    The recent decade has been a prosperous period for Bangladesh's economic growth, which has elevated the country's economic position to developing or emergent. The accelerating expansion of this country's GDP from the Indian ...
  • Study of generation of electricity using wind turbine for IUT south hall residence 
    Mziarani, Abou Hanifa; Abdalla, Abdirazak; Abubakar, Aayyad (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    For as long as we remember the world source of energy evolved around fossil energy which are limited, expensive and above all are a source of danger to both mankind and its surrounding. This report main focus is to present ...
  • Study of Nanofluid Based Direct Absorption Solar Collector 
    Islam, Touhid; Antik, Asif Rahman; Alam, Mir Karim Ebne (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    As technology advances finding new sources of energy is getting more and more importance. Solar energy is the most significant source of renewable energy hence researches focus on using the most of it. Solar collectors are ...
  • Study of Ocean Wave Energy in an Optimum Wave Tank With a Plunger Type Wave maker 
    Haq, Rafiul; Abdullah, Syed Mohammad; Sunvy, Al Shaharia; Pasha, Tofael Ahmed (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    Renewable energy technology that can operate to rival with conventional energy sources at a monetary elevation. A wave power utensil comprises an energy harvesting strategy. Our Project provides the distinctive and ...
  • Study of supply chain management of an industry 
    Fahim, Mirza Abu (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Supply chain management (SCM) is a factory management technique that aims at maximum profit from a business by ensuring visibility in the supply chain. SCM is a dynamic management tool, which is a combination of many ...
  • Study of the Applicability of Chemical Precipitation and Electrocoagulation Method for Chromium Recovery in CETP at Savar Leather Industrial Park 
    Rahman, Sazedur; Karim, Tasdee Al; Khan, Munabbih Hasan Nadid (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    When we visited tanneries at Savar Tannery Industrial Estate in order to gain a deeper understanding of the leather tanning industry of Bangladesh, we realized that the lack of environmental compliance certification is ...
  • Study of the Economic Viability of Battery Second life 
    Akanto, M.K. Nahyan (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
    Lithium-ion batteries are now widely used in a variety of applications, from portable devices to electric cars and the integration of renewable energy sources, as a result of the growing demand for energy storage ...

Search IUT Repository


Advanced Search

Browse

My Account