Browsing Undergraduate by Title

Browsing Undergraduate by Title

Sort by: Order: Results:

  • Designing and construction of an actuator 
    Hasan, Imran; Uddin, Imtiaz (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Actuator is a mechanism that puts something into automatic action.The goal of our project is to design and construct an actuator which will give an automatic action. For achieving this goal we needed to design a model of ...
  • Designing and Construction of Solar Tracker 
    Abdullah; Muhammad, Jebreel (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    The crucial purpose of our systematic experimental technique is to concentrate the solar radiation on the solar panel i.e. to construct a solar tracker system which will be capable of converting maximum sun light to ...
  • Designing and Manufacturing the control system of an underwater robot 
    Islam, MD. Maidul; Sumon, MD. Shums (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    As the ocean attracts great attention on environmental issues and resources as well as scientific and military tasks, the need for and use of underwater robotic systems has become more apparent. Underwater robotics represents ...
  • Designing of an Advanced Reactor to Harness Fuel Oil from Waste Plastic 
    Rafi, Abdullah Al; Haque, Redwanul; Sikandar, Faizan (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur, Bangladesh, 2018-11-15)
    Pyrolysis of waste plastic is a prospective way of conversion of waste plastic into low-emissive hydrocarbon fuel. The present research is focused on the conversion of waste plastic into low-emissive hydrocarbon fuel by ...
  • Detection of Cracks in a Cantilever Metal Plate Using Vibrational Techniques 
    Shuvo, Sharif Rezwan (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2020-11-15)
    The main objective of this research is to detect crack at different positions of the thin metal cantilever plate based on the natural frequency. Most of the researchers have investigated on beam. Few researchers have ...
  • Determination of the Optimum Phenomena of Universal Refrigeration System & Development of A Testing Bench to Measure Cooling Load of A/C System 
    Asad, Yasin Bin; Shovon, Kaisar Mahmud; Shah, Quazi Md. Zobaer (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    Air conditioning and refrigeration definitely belong in the most important engineering achievements of the 20th century. Both technologies make the lives of others far more comfortable and enjoyable. In our project, we ...
  • Determining factors hampering the implementation of techniques for the reduction of prominent wastes in export-oriented garments factories: a case study 
    Rahman, Hussein Areefur; Islam, Shehroze (IUT, MCE, 2016-11-20)
    In the competitive global market, the position of garments industry, the most important remittance-earning industry, is deteriorating by day due to numerous reasons one of which being increase in cost. To keep up with ...
  • Development of an Innovative Fireball Fire Extinguishing System 
    Elahi, Ashique E; Rahman, Minhajur (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    Industries are facing a lot of fire based accidents these days. As a result, massive losses of lives as well as money are suffered by the owners. The conventional fire extinguishing systems are found to be not enough to ...
  • Development of Carboxymethyl Cellulose (CMC) Based Electro Active Polymer Nano Composite & Its Potential Application As Solid State Dye Sensitized Solar Cell 
    Mahbub, Md. Zakaria (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    Organic solar cell research has developed during the past 30 years, but especially in the last decade it has attracted scientific and economic interest triggered by a rapid increase in power conversion efficiencies. This ...
  • Development of IOT Based Smart Irrigation System 
    Salah, Awad; Oumarou, Almouzzammil; Ismaila, Mouhammad Hamza; Amadou, Oumarou (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
    This project presents an IOT based smart irrigation system in order to optimize watering schedules for plants and lawns. The system uses an Arduino Uno microcontroller in conjunction with IoT(Internet of Things) sensors ...
  • Development of The Capsule Orientation Mechanism of an Automatic Capsule Filling Machine 
    Khan, Towhid Alam (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    In the automatic Capsule filling machine Vacuum is used to separate the cap and body of a capsule before inserting the formulation into the body part of the capsule. This Vacuum pump consumes a very high amount of power. ...
  • EAHE-Solar Chimney Coupled Passive Cooling System and the Simulation 
    Alam, Chowdhury Sadid; Dhrubo, Tm Abir Ahsan (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    In the 21st century the talk of the time has been proper use of renewable energy sources due to the continuous depletion of non-renewable energy sources and global warming as a result of combustion of fossil fuels. The ...
  • Effect of holes placed on the perforated finned heat exchanger at different angles on the Nusselt and Reynolds numbers 
    Saad, Muhammad (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    In this research, 6mm diameter holes were opened on each circular fin on a heating tube in order to increase convective heat transfer. This is different from the other studies in the literature. These holes were placed ...
  • Effect of Mechanical Vibrations In Sand Casting of Aluminium Alloy Using Organic Binders 
    Mahmud, Safayet; Rownak, Ragib (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-30)
    This paper represents a systematic finite element analysis to evaluate the various mechanical vibration impacts on sand mold casting during aluminum alloy cooling. In general, the mold materials govern the molten metal ...
  • Effect of Point and Line Defects on the Mechanical Behavior of Single Layer MoTe2 
    Aziz, Md. Jobayer (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
    Following the groundbreaking discovery of graphene, the scientific community has witnessed a surge of interest in two-dimensional (2D) materials during recent times, remarkable capabilities and versatility for technological ...
  • Effect of Rake Angle & Relief Angle in Chip Formation During Turning Operation 
    Ahmed, Tanvir; Anik, Eftekharul Hoque; Rythm, Fahim Ajmal (2018-11-15)
    The simulation of various machining processes is a matter of interest in active research for over two decades. This study develops a combined simulation based and experimental approach to find the effect of rake Angle & ...
  • Effect of rake angle and cutting speed in chip morphology and prediction of tip temperature and cutting forces with FEA software 
    Khalid, Saifullah; Tanzil, Sifat Ullah (IUT, MCE, 2016-11-20)
    To minimize experimental time and expensive experimental test, researchers always refer FEA as most effective system. In this paper, we tried to show the effect of rake angle, cutting speed in chip morphology for different ...
  • Effect of Scouring Around Bridge Piers 
    Enam, Samin (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    A series of relatively recent bridge failures due to pier scour, as reported in literature, has rekindled interest in furthering our understanding of the scour process and for developing improved ways of protecting bridges ...
  • Effect of tool geometry ob chip morphology and cutting parameters in turning process by FEM analysis 
    Meem, Rahnum Tahia (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
  • Effect of Tool Geometry on Chip Morphology and Cutting Parameters in Turning Process by FEM Analysis 
    Meem, Rahnum Tahia (Department of Mechanical and Production Engineering, 2021-03-30)
    The purpose of this study is to analyze various parameters like temperature, pressure, max shear stress etc while keeping two parameters constant

Search IUT Repository


Advanced Search

Browse

My Account