Browsing Undergraduate by Title

Browsing Undergraduate by Title

Sort by: Order: Results:

  • Techno-Economic and Environmental Feasibility Analysis of Solar water Heating System for a Textile Industry In Bangladesh 
    Rahman, Md. Ashiqur; Salahuddin, R.R.M.; Shoieb (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    Considering the energy crisis and environmental concerns, green energy technologies are being focused to harness energy from every available source. Extraction of thermal energy using solar collector is one such technology ...
  • Techno-economic and Feasibility Analysis of a Thermo-chemical Waste to Energy Conversion Technology from the Perspective of Dhaka City, Bangladesh 
    Hossain, Mohammad Masrur; Inan, Md. Navid (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    As a consequence of dynamic growth in its economy, Bangladesh has seen rapid urbanization in recent years. Dhaka, the capital of Bangladesh, serves as the economic, cultural, and educational center. Unfortunately, Dhaka ...
  • Techno-economic assessment of a stand-alone solar photovoltaic system at IUT campus 
    Thani, Soibahadine Mohamed; David, Saidou Mamadou; Abdallah, Abdirazak (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    Renewable energy resource is considered as clean, it can reduce the emission of greenhouse gases (GHGs) which become a big concern around the world. Electricity produced using solar energy which is one of the renewable ...
  • Thermal and Hydraulic Performance Comparison of Carbon Based and Metal Based Nano fluids in Flat Plate Solar Collector: A CFD Analysis 
    Nuhash, Mashrur Muntasir; Alam, Md. Ibthisum; Zihad, Ananta (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-31)
    The constant rise in global temperature and the need to reduce fossil fuel consumption has made renewable energy sources desirable, especially solar energy systems. Flat plate solar collector (FPSC) is one of the most ...
  • Thermo-hydraulic Analysis of Helically corrugated geometry using Single phase and Hybrid Nanofluids 
    Mustakim, Ashraf; Naqib-Ul-Islam, S.M. (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-04-30)
    This research set out to look at the aspects of flow and convective heat transfer in helically corrugated pipes. The main goal is to evaluate the thermo-hydrodynamic performance of single and hybrid nanofluids in this ...
  • Thermodynamic Analysis of Cascade Refrigeration System for Low Temperature Applications 
    Faruque, Md Walid; Nabil, Mahdi Hafiz (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    In recent years, concern about global warming and ozone layer depletion has been growing. Increasing attention is being given to refrigerants used in refrigeration and air-conditioning systems as they have a signi cant ...
  • Thermodynamic analysis of Supercritical CO2 Partial Cooling Cycle integrated with two Organic Rankine Cycles 
    Shakil, Md. Reduan Afroj (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), Board Bazar, Gazipur-1704, Bangladesh, 2023-05-30)
    This paper presents an innovative approach for increasing the thermal efficiency of supercritical CO2 (SCO2) power cycles by incorporating partial cooling with a two-bottom organic rankine cycles (ORC). The SCO2 power ...
  • Thermodynamic Investigation of Combined Cycles And Polygeneration Systems With An Emphasis On Supercritical Carbon Dioxide Power Cycles 
    Bishal, Salim Sadman; Faysal, Dewan Fahim (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2022-05-31)
    Because of the tremendous growth in global population and economic activity, as well as growing environmental concerns, efficient energy use will be critical in creating the future energy landscape. Reduced waste heat ...
  • Trajectory Planning and Tracking of an Autonomous Robot Vehicle 
    Rifat, Md Mahdiuzzahid; Islam, Md Raihanul; Kamal, Jonaed Bin Mustafa; Islam, Md Wasequl (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    This paper is about trajectory planning and tracking of an autonomous robot vehicle. The autonomous robot was made by transforming a simple RC car into a GPS guided robot. Present and the target locations were given from ...
  • Trajectory Planning and Tracking of an Autonomous Robot Vehicle 
    Rifat, Md Mahdiuzzahid; Islam, Md Raihanul; Kamal, Jonaed Bin Mustafa; Islam, Md Wasequl (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    This paper is about trajectory planning and tracking of an autonomous robot vehicle. The autonomous robot was made by transforming a simple RC car into a GPS guided robot. Present and the target locations were given from ...
  • Transitional change of conventional manufacturing system towards lean manufacturing system into the apparel manufacturing industry: a case study 
    Islam, Md. Aminul; Ashfaq, Shaikh (IUT, MCE, 2016-11-20)
    Traditionally operated garment industries are facing problems like low productivity, longer production lead time, high rework and rejection, poor line balancing, low flexibility of style changeover etc. These problems were ...
  • Two-phase numerical simulation of nanofluid laminar convection heat transfer through Flat-plate solar collector 
    Arif, Abdul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    Scarcity and continuous depletion of conventional energy sources gradually making renewable energy especially solar energy as an alternative energy source. One of the simplest and most direct applications of this energy ...
  • Vibration analysis and effect of internal Stiffener on the structural response of Steel wind turbine tower 
    Islam, Md. Mirazul; Al Saeed, Abdullah (IUT, MCE, 2016-11-20)
    In this paper, the structural response of steel tubular wind turbine towers with various design configuration is analyzed using FEM modeling. 50m tower with 3 different design option as follows: i) tower without stiffener, ...
  • Vibration Analysis of a Cracked Cantilever Flat Plate 
    Islam, Shawkat (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    This paper investigates the opportunities of observing the response of a cantilevered flat plate through vibration analysis using Eddy-Current Displacement sensors. External disturbance such as excitations, fluctuating ...
  • Vibration Analysis of a Rectangular Plate 
    Ahmed, Syed Shaheer Uddin; Mehfuz, Nagib; Rahman, Ebadur (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    Vibration is an inevitable occurrence in any structure. The effect of vibration however can be devastating. It can cause stark premature failure incurring huge cost for replacement or repair. Nevertheless if the vibration ...
  • Vibration Analysis of a Simple Cantilever Beam 
    Jamal, Kazi Asif; Hakim, Sheikh Tanvir Bin (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    Understanding the vibration behavior of a cantilever beam is the major priority of interest of our work. In this work, we have analyzed the real structure behavior of a 30 cm (length) cantilever beam and examined the ...
  • Vibration Analysis of a Simply Supported Cylindrical Shell 
    Ahmed, Abrar; Najib, Mehran; Masuk, Ashik Ullah Mohammad (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    The linear response of a cylindrical shell (thin cylinder) subjected to modal and harmonic excitations are investigated. Natural frequencies and forced vibration response are investigated for the simply supported-simply ...
  • Vibration analysis of a thin cylindrical shell 
    Bari, Md. Muhiminul; Enam, H.M. Khairul (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2013-11-15)
    In this paper, vibration characteristics of thin cylindrical shell are investigated by using & ANSYS WORKBENCH 14.0. Vibration response are investigated by Transient Structural analysis for the simply supported boundary ...
  • Vibration analysis of a thin cylindrical shell 
    Islam, Md. Akibul; Alam, Ahmed Nirjhar (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    In this paper, vibration characteristics of thin cylindrical shell are investigated by using & ANSYS WORKBENCH 14.0. Vibration response are investigated by Transient Structural analysis for the simply supported boundary ...
  • Vibration Analysis of a Tire 
    Nuhash, Mutasim Fuad; Masud, Md. Shams (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2019-11-15)
    Noise and vibration, transmitted from road to the body structure of a typical automotive wheel, considered as an important parameter in automotive NVH (Noise, Vibration and Harshness) performance optimization. Having a ...

Search IUT Repository


Advanced Search

Browse

My Account