Browsing Undergraduate by Issue Date

Browsing Undergraduate by Issue Date

Sort by: Order: Results:

  • Effect of Scouring Around Bridge Piers 
    Enam, Samin (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    A series of relatively recent bridge failures due to pier scour, as reported in literature, has rekindled interest in furthering our understanding of the scour process and for developing improved ways of protecting bridges ...
  • CFD analysis of Thermal Comfort & Contaminant removal from a typical Hospital Operation Theater 
    Alam, Tousif Bin (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    This Thesis paper presents CFD analysis of Thermal Comfort & Contaminant removal from a typical Hospital Operation Theater. This is a three dimensional analysis. The operation theater model includes a patient lying on an ...
  • Vibration Analysis of a Simply Supported Cylindrical Shell 
    Ahmed, Abrar; Najib, Mehran; Masuk, Ashik Ullah Mohammad (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    The linear response of a cylindrical shell (thin cylinder) subjected to modal and harmonic excitations are investigated. Natural frequencies and forced vibration response are investigated for the simply supported-simply ...
  • Automotive Hybrid Vehicle System or Hybrid Automobile 
    Merfaq, Hemyar Ahmed Saleh; Yusuf, Abdulmalik Muhammad (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    An increasingly diverse set of hybrid-electric vehicles (HEVs) is now available in North America. The recent generation of HEVs have higher fuel consumption, are heavier, and are significantly more powerful than the first ...
  • Fabrication of Micro Heat Pipes of Different Diameter for Cooling of a Desktop Computer Processor 
    Chowdhury, A.M.Sufian (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    The experimental observations stated here is on the basis of heat transfer performance of parallel micro heat pipes (PMHPs) of different diameters (ID of 2mm & 3mm) taking Acetone as a working fluid that can be used for ...
  • Prediction and Optimization of Surface Roughness by Desirability Analysis 
    Ullah, S M Tawfiq; Khan, Ragib Ishraq; Rahman, Md. Mahfujur (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    This project deals with the prediction and optimization of surface roughness by desirability approach. There are some machining parameters that have significant effects on the surface of a metal and cause surface roughness. ...
  • Study of Tool Wear & Surface Roughness Using Artificial Neural Network 
    Reza, Md. Nayemul Islam; Chowdhury, Mohammed Gofran (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    In any machining operation, tools wear and surface roughness results inaccuracy and inefficiency. So it is always desirable to ensure minimum level of tool wear and surface roughness. Both of them depend on some parameters ...
  • Improvement of Machinability Responses of Mild Steel During Electromagnet Assisted Turning Process 
    Noor, Shafi (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    This project aims to investigate the effects of magnetic field applied in different orientation on the machinability responses of mild steel during turning operation. The machinability responses include tool wear, surface ...
  • Electro-Magnetic Suspesion System for Vehicles 
    Rahman, Kazi Moshiur (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    A conceptual model of electro-magnetic suspension system is presented. The goal is to provide better performance and smooth operation than the conventional one. Two electro-magnets are used to use the repulsive force to ...
  • Numerical Investigation of Natural Convection in a Cube filled with Nanofluid 
    Rifat, S. M. (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    In this project, natural convective heat transfer in a partitioned cube utilizing nanofluids is studied. The vertical left and right walls are considered as the hot and cold walls, respectively and the partitions assumed ...
  • Prospect of solar irrigation system over conventiona l irrigation system 
    Matin, Md.Abdullah Al (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    Bangladesh is a third world country with less economic growth. About 36% (Rahimafrooz) of GDP and 64% (Rahimafrooz)of its employment comes from agriculture. But our agricultural history is declining due to lack of ...
  • Comparison of Performance of a 500 Watt Refrigeration System With One Compressor and Three Refrigerants 
    Sakib, Nazmus; Azam, Rakib-Ul- (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    Currently in Bangladesh, most low capacity refrigerant systems (below 1 ton refrigerating effect) use R-12 compressors with R-12 refrigerant fluid. But with the global policy changes of phasing out R-12, these systems need ...
  • Development of The Capsule Orientation Mechanism of an Automatic Capsule Filling Machine 
    Khan, Towhid Alam (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    In the automatic Capsule filling machine Vacuum is used to separate the cap and body of a capsule before inserting the formulation into the body part of the capsule. This Vacuum pump consumes a very high amount of power. ...
  • Development of Carboxymethyl Cellulose (CMC) Based Electro Active Polymer Nano Composite & Its Potential Application As Solid State Dye Sensitized Solar Cell 
    Mahbub, Md. Zakaria (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    Organic solar cell research has developed during the past 30 years, but especially in the last decade it has attracted scientific and economic interest triggered by a rapid increase in power conversion efficiencies. This ...
  • An Investigation of Diaphragm Rupturing Phenomena for Generation of Shock Wave in the Shock Tube 
    Hussain, Shohag; Waseek, Ishfaque (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    Shock Wave generation in shock tube now a days very important for Shock Wave study in different fields. For educational purpose the student must visualize what is Shock Wave and it’s properties but it is not possible for ...
  • Construction and Mechanism of a Humanoid Robot leg 
    Al-Azad, Zubair; Sami, Swad-Us-; Chowdhury, Faiyaz; Chowdhury, Muhammad Faisal Uddin (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    This thesis describes designs of the robot-leg mechanisms, hardware and the leg control methods for walking machines. The body of knowledge that applies to mobile wheeled robots is quite well developed. However, autonomous ...
  • Microcontroller Based Temperature Sensor and Data Logger 
    Uddin, Kazi Ahsan; Arafat, Yeasir (2012-11-15)
    The average temperature during summer season in Bangladesh is quite high. The food industries & houses are exposed to excess heating not only due to the cooking temperature but also by cooking appliances and there‟s always ...
  • Review of Renewable Energy Projects in Bangladesh 
    Daiyan, Md. Mahir Abdud; Ahmad, Al-Rafin (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    Energy is one of the basic needs of the present human civilization. Without energy a nation can not be developed. All the developed countries in the world have the adequate power generation. But in the developing and third ...
  • Fabrication of a Quadrocopter 
    Abedin, Ahmed Afif Bin; Shuvo, Md. Jobayer Hossain; Khan, Abir (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    This paper presents a quadrocopter helicopter as a prototype platform usable for research and education. Apart from the description fabrication hardware and controlling software, we discuss several issues regarding drone ...
  • Study and construction of a single person fuel efficient light weight vehicle and the feasibility of biogas as an alternative fuel 
    Rabbani, G. M.; Erfanullah, A. H. M.; Islam, Mir Thaufeequl; Abdullahi, Ahmed Md. (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    All around the world, the modern civilization is trying to harness as much energy as possible from renewable energy resources. Faced with the threat of depletion fossil based fuel and the negative effects of using fossil ...

Search IUT Repository


Advanced Search

Browse

My Account