Undergraduate: Recent submissions

  • Experimental study on acoustic energy harvesting using single and double PZT film configuration in Helmholtz resonator 
    Shan, A.N.M Nihaj Uddin; Mostafa, Md. Zayed; Shohan, Md. Iftekhar Uddin (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    Acoustic energy harvesting has been the main attraction for many researchers because of energy scarcity. Low-frequency energy harvesting is a highly complicated process. However, the physical characteristics of piezoelectric ...
  • Numerical investigation of local scour around different shaped bridge piers using flow 3d software 
    Shahriyar, Md Abid (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
  • Study of Nanofluid Based Direct Absorption Solar Collector 
    Islam, Touhid; Antik, Asif Rahman; Alam, Mir Karim Ebne (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    As technology advances finding new sources of energy is getting more and more importance. Solar energy is the most significant source of renewable energy hence researches focus on using the most of it. Solar collectors are ...
  • Energy analysis of 171 mw combined cycle power plant in Bangladesh 
    Sifat, Syed Musabbir Al; Piash, Mehedi Hasan (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    The Kushiara Combined Cycle Cogeneration Plant is investigated in this research by energy and exergy analyses. Energy analysis using key operating conditions is used to evaluate the basic thermodynamic properties of the ...
  • Effect of tool geometry ob chip morphology and cutting parameters in turning process by FEM analysis 
    Meem, Rahnum Tahia (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
  • Modelling of NOx and SOx emission: A CFD case study in a small-scale furnace 
    Noor, Faria; Sarwar, Rezwana; Khan, Musarrat (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    A CFD case study was done to learn the impact of Flue Gas Recirculation in a horizontal axis small scale furnace. Flue Gas Recirculation was performed to seehow the emissions are affected with a change in recirculation ...
  • Experimental and numerical modelling of break water overtopping for plain, converging and stairs slope 
    Ahmed, Niyaz Afnan; Tahsin, Maysha (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    In recent years, emphasis has been given on converting wave energies in a stable form to protect coastal areas from erosion. Wave energy has grown to develop the reputation of being a major and promising energy resource ...
  • Pneumatically Operated Push on Capping System 
    Imran, Tushar (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    Automation is constantly making significant impact on many industries other than manufacturing. Automation has been taking over the manual operations that have been carried out in the industries for centuries. By reducing ...
  • Remote Controlled Lawn Mower 
    Abdi, Abshir Hassan Mohamud; Elsadig, Ayman; Ali, Abubakar Isak; Ali, Abdullah Mabkhot; Khawari, Ahmad Shuaib (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    The remote-controlled solar-powered lawnmower has been developed to reduce the amount of work required of humans in trimming the lawn. Due to the increased availability of sophisticated equipment, our work has become more ...
  • Vibration Analysis of a Rectangular Plate 
    Ahmed, Syed Shaheer Uddin; Mehfuz, Nagib; Rahman, Ebadur (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    Vibration is an inevitable occurrence in any structure. The effect of vibration however can be devastating. It can cause stark premature failure incurring huge cost for replacement or repair. Nevertheless if the vibration ...
  • Vibration Analysis of a Simple Cantilever Beam 
    Jamal, Kazi Asif; Hakim, Sheikh Tanvir Bin (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    Understanding the vibration behavior of a cantilever beam is the major priority of interest of our work. In this work, we have analyzed the real structure behavior of a 30 cm (length) cantilever beam and examined the ...
  • Designing a Single Passenger Car: a three-wheeler 
    Barrie, Alusine; Aziz, Mohammed Abdo (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    The world automobile industry had experienced near constant growth through to the mid-1980’s. The transition from horse carriages to automobiles brought about uncertainty over the development of the product during the ...
  • Preventive maintenance of automobile 
    Elgrashi, Abdalla; Hussein, Abdulraqeb; Nur, Muhamad Hussein (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
  • Fabrication of a Quadrocopter 
    Abedin, Ahmed Afif Bin; Shuvo, Md. Jobayer Hossain; Khan, Abir (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    This paper presents a quadrocopter helicopter as a prototype platform usable for research and education. Apart from the description fabrication hardware and controlling software, we discuss several issues regarding drone ...
  • Development of Carboxymethyl Cellulose (CMC) Based Electro Active Polymer Nano Composite & Its Potential Application As Solid State Dye Sensitized Solar Cell 
    Mahbub, Md. Zakaria (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    Organic solar cell research has developed during the past 30 years, but especially in the last decade it has attracted scientific and economic interest triggered by a rapid increase in power conversion efficiencies. This ...
  • Determination of the Optimum Phenomena of Universal Refrigeration System & Development of A Testing Bench to Measure Cooling Load of A/C System 
    Asad, Yasin Bin; Shovon, Kaisar Mahmud; Shah, Quazi Md. Zobaer (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    Air conditioning and refrigeration definitely belong in the most important engineering achievements of the 20th century. Both technologies make the lives of others far more comfortable and enjoyable. In our project, we ...
  • Review of Renewable Energy Projects in Bangladesh 
    Daiyan, Md. Mahir Abdud; Ahmad, Al-Rafin (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    Energy is one of the basic needs of the present human civilization. Without energy a nation can not be developed. All the developed countries in the world have the adequate power generation. But in the developing and third ...
  • An Investigation of Diaphragm Rupturing Phenomena for Generation of Shock Wave in the Shock Tube 
    Hussain, Shohag; Waseek, Ishfaque (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    Shock Wave generation in shock tube now a days very important for Shock Wave study in different fields. For educational purpose the student must visualize what is Shock Wave and it’s properties but it is not possible for ...
  • Microcontroller Based Temperature Sensor and Data Logger 
    Uddin, Kazi Ahsan; Arafat, Yeasir (2012-11-15)
    The average temperature during summer season in Bangladesh is quite high. The food industries & houses are exposed to excess heating not only due to the cooking temperature but also by cooking appliances and there‟s always ...
  • Study and construction of a single person fuel efficient light weight vehicle and the feasibility of biogas as an alternative fuel 
    Rabbani, G. M.; Erfanullah, A. H. M.; Islam, Mir Thaufeequl; Abdullahi, Ahmed Md. (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2012-11-15)
    All around the world, the modern civilization is trying to harness as much energy as possible from renewable energy resources. Faced with the threat of depletion fossil based fuel and the negative effects of using fossil ...

Search IUT Repository


Advanced Search

Browse

My Account