Undergraduate: Recent submissions

  • Effect of holes placed on the perforated finned heat exchanger at different angles on the Nusselt and Reynolds numbers 
    Saad, Muhammad (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    In this research, 6mm diameter holes were opened on each circular fin on a heating tube in order to increase convective heat transfer. This is different from the other studies in the literature. These holes were placed ...
  • 3d Numerical Investigation of Flow and Heat Transfer Characteristics in Smooth Wavy Fin and Elliptical Tube Heat Exchangers Using ARW Vortex Generator 
    Sabbir, Shah Mohammad; Chowdhury, Sadat Hasan (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2017-11-15)
    3D computational analysis was performed to investigate heat transfer and pressure drop characteristics of flow in SWFET (Smooth Wavy Fin-and-Elliptical Tube) heat exchanger with VGs (vortex generators). The numerical model ...
  • Investigation of the effect of machinability parameters by voice activated ultrasonic sound wave device during turning process of pre-heated mild steel 
    Latif, Md. Sharafat; Neelav, Afzal Hossain (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    Surface roughness represents the dimensional accuracy of the finished product and is one of the most important quality requirements of the finished product. Surface roughness is generally detrimental to the efficient ...
  • Conversion of petrol engine to LPG system (dual fuel system) 
    Aishan, Abdulaziz; Alhajaji, Yousef Ahmed (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    Pollution from automobiles has been great concern all over the world Also the increasing demand of energy has soared up the prices of controlling it. Researchers are being carried out throughout the developed and ...
  • Prediction of Fracture Behavior by Image Processing 
    Javed, Asif (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    The failure of structure leads to the loss of money but more importantly, the loss of life. Failures occur for many reasons, including uncertainties in the loading or environment, defects in the materials, propagation of ...
  • Performance of the Solar Photovoltaic Panels with Water Cooling System 
    Shams, Khaled; Reza, MD. Tahmid; Abyaz, Safawan (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    It is a common phenomenon that absorption of solar radiation increases the temperature of photo voltaic cells , which results in a decrease of efficiency . The objective of this research is to decrease the cell temperature ...
  • Surface Roughness Optimization of Stainless Steel using ABC (Artificial Bee Colony) Algorithm 
    Khan, Koushik Alam; Tomal, A.N.M. Amanullah (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    In any machining operation surface roughness results inaccuracy and inefficiency. So it is always desirable to ensure minimum level of surface roughness. Both of them depend on some parameters like feed, spindle speed and ...
  • Design & construction of an ergonomic footrest for an electric three wheeler vehicle and development of an entrepreneurship scheme including supply chain management 
    Islam, Mohimenul; Khan, Md. Rakin Mashrur; Noman, Khandaker (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    At present Bangladesh, electrical three wheeler vehicles are the most common means of short-distance transport. It is actually a modification of “Rickshaw”, a very old and popular transport of this region. Unlike rickshaw ...
  • Experimental performance evalution of heat transfer rate in automotive radiator by adding nanoparticles in different proportions 
    Hemal, Sayed Ahmed AL Hasan; Uddin, Md. Rakib (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    CNG converted engines produces much more heat than Petrol or Diesel Engines .This is because the compression ratio of CNG is higher than other types of engines, high combustion temperature & low performance of coolants. ...
  • CFD Analysis of Heat Transfer Enhancement Using Nanofluid And Observation Of The Geometric effect in case of Flat Cross Section 
    Faysal, Syed Rafat; Ovi, Ifat Rabbil Qudrat (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    In the present study, the heat transfer enhancement using aluminium oxide with 1% volume fraction nanofluids in laminar pipe flow for different cross-sections with constant heat flux(H1 boundary condition) has been studied ...
  • Experimental And Numerical Study Of Thermal Distribution And Emission In Conventional Kitchen 
    Chowdhury, Mahmood Arifin; Haque, Md. Moinul (2014-11-15)
    Building Energy Simulation (BES) programs often use conventional thermal comfort theories to make decisions, whilst recent research in the field of thermal comfort clearly shows that important effects are not incorporated. ...
  • Analysis of muscles and gripping activities of human hand during drilling operation 
    Khan, Taimur Hassan; Alaqad, Mohammed H (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    Drilling is the most common machining process. One estimate is that 75% of all material removed comes drilling operations. Drilling involves the creation of holes that are right circular cylinders. This is accomplished ...
  • Design and construction of mobile phone based automatic security door locking system 
    Idi, Mubaraka; Ahmed, Sayed Noor (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-10-15)
    This project will basically focus on the use of mobile phones to control the security locking system . The basic concept of the project is to detect a particular ringtone from a SIM supporting modem and use it to toggle ...
  • Trajectory Planning and Tracking of an Autonomous Robot Vehicle 
    Rifat, Md Mahdiuzzahid; Islam, Md Raihanul; Kamal, Jonaed Bin Mustafa; Islam, Md Wasequl (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    This paper is about trajectory planning and tracking of an autonomous robot vehicle. The autonomous robot was made by transforming a simple RC car into a GPS guided robot. Present and the target locations were given from ...
  • Trajectory Planning and Tracking of an Autonomous Robot Vehicle 
    Rifat, Md Mahdiuzzahid; Islam, Md Raihanul; Kamal, Jonaed Bin Mustafa; Islam, Md Wasequl (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    This paper is about trajectory planning and tracking of an autonomous robot vehicle. The autonomous robot was made by transforming a simple RC car into a GPS guided robot. Present and the target locations were given from ...
  • Blood Flow Dynamics in Cerebral Aneurysm - A CFD Simulation 
    Shishir, Shamiul Sarker; Miah, Md. Abdul Karim (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-10-15)
    In the present study, the dynamics of blood flow in saccular cerebral aneurysms is investigated. The aneurysm is considered to be located at an arterial bend in human vascular system. The flow field is analyzed computationally ...
  • Vibration analysis of a thin cylindrical shell 
    Islam, Md. Akibul; Alam, Ahmed Nirjhar (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    In this paper, vibration characteristics of thin cylindrical shell are investigated by using & ANSYS WORKBENCH 14.0. Vibration response are investigated by Transient Structural analysis for the simply supported boundary ...
  • Performance comparison of built-in-storage type solar water heaters 
    Haque, Md. Azazul; Sadri, Asif Mohaisin; Rahman, K.M. Mahbubur; Rakib, Md. Abdur; Ahmed, Syed Adeeb; Hossain, Md. Shahjalal; Bhuiyan, Md. Fahmid Matin; Haque, Iftehajul; Islam, Md. Rejwan-Ul- (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    Three identical built-in storage type solar water heaters (BSWH) were tested under same conditions simultaneously in IUT campus, Bangladesh. All of the heaters having corrugated plates as absorbers, they differ as one has ...
  • Noise Attenuation by Helmholtz Resonators Attached to a Duct 
    Mahmud, Md. Amin; Sameen, Zahin (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)
    The resonating frequency and the transmission loss due to two 1-DOF cylindrical Helmholtz resonator attached to a duct is thoroughly investigated in this literature to attenuate low frequency noise using finite element ...
  • Fuel Injector Tester 
    Ibrahim, Mohamed Ahmed; Gorashi, Abdallh Mohammed (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2014-11-15)

Search IUT Repository


Advanced Search

Browse

My Account