Undergraduate: Recent submissions

  • Molecular Dynamics Simulation of Two Dimensional Materials 
    Hezam, Ahmad Fatehi Ali Mohammed; Haider, A.S.M. Redwan (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-06-06)
    Ultra-thin materials like Graphene and Transition Metal dichalcogenides are a novel class of materials with robust applications in electronic devices. These 2D materials are one of the main driving forces behind the rise ...
  • Nanofluid Implementation in Heat Exchanger Geometries 
    Ahmad, Foyez; Mahmud, Sajjad (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-06-07)
    In recent years, nanotechnology has evolved as an important field that employs sophisticated "green" nanoparticles incorporated in conventional engineering resources. The heat transfer performance of nanofluids is superior ...
  • Numerical study on thermal performance analysis of radiator: effect of the number of pipes 
    Ousmanou, Yaya; Tchari, Madi Abba (Department of Mechanical and Production Engineering(MPE), Islamic University of Technology(IUT), 2022-06-10)
    The car Radiator is one the most important of its parts which plays a very important role in the heat transfer of the engine. Our study is based on the number of pipes or tubes in a car radiator. By varying the number of ...
  • A brief review of phase change materials and CFD study of thermal management technique for electronic cooling using phase change material (PCM) 
    Khan, Basit; khan, Muhammad Wasim; Almojamer, Momen; Khan, Muhammad Asif Nawaz (Department of Mechanical and Production Engineering, 2021-03-30)
    In this project two different studies were performed, coupled with the review study a numerical study of (2D/3D) transient numerical simulation of a phase change material (PCM) based finned heat sink were performed to ...
  • Performance evaluation of wave-carpet in wave energy extraction at different coastal regions: an analytical approach 
    Miskati, Sajia; Farin, Farhana Mumtahin (Department of Mechanical and Production Engineering, 2021-03-30)
    Globally, muddy seafloors have been reported to extract a significant percentage of energy in wave that interacts at different wavelengths. Since mud is capable of taking so much energy out of ocean waves, the researchers ...
  • Studying the effect of various contact materials in perovskite/silicon tandem solar cell 
    Shabnam, Shamaita (Department of Mechanical and Production Engineering, 2021-03-30)
    In the last decade, Perovskite based solar cells have seen massive enhancement, as opposed to conventional silicon (Si) based solar cells. As a result, its research has attracted a lot of attention in recent times. The ...
  • Study of the Effect of Stacking Sequence on the Tensile and Flexural Behaviour of Carbon/Jute Epoxy Composite Materials: Experimental and Numerical/FE Analysis 
    Mohaimen, Teena; Anjum, Hakim Dina; Haque, Md. Enamul; Serajee, Mokid Mohammad Shelley (Department of Mechanical and Production Engineering, 2021-03-30)
    Currently, there is an increasing trend of utilizing composite materials in various sectors of engineering and technology, particularly aerospace and industrial application, for their exceptional mechanical and thermal ...
  • Design and analysis of a compressed air vehicle 
    Shatat, Khalil I A; Alawawda, Amro A A; Alqedra, Sohaib O A; Haniyeh, Hassn A. H.; Abukashef, Abdallah N M; Alfarra, Said A B (Department of Mechanical and Production Engineering, 2021-03-30)
  • Conducting a heat flow study in a vessel with the presence of natural convection and phase change material (PCM) 
    Hassan, Ahmad Muntar (Department of Mechanical and Production Engineering, 2021-03-30)
    Experiments on the liquid and convectional circulator heat transfer and cooling in a rectangular heat storage tank with natural circulation As a phase change material 0.1 to ten , paraffin is used (PCM). The effect of ...
  • Optimization of Micro EDM Process Using Multi Objective Grasshopper Optimization Algorithm (MOGOA) 
    Sakib, Mohmmad Shadman (Department of Mechanical and Production Engineering, Islamic University of Technology, Gazipur, Bangladesh, 2021-03-30)
    The complex cross sectional micro-operation entails precise and stable micro machining processes. Localized electrochemical deposition in micro EDM operation is an inexpensive meticulous machining approach which can ...
  • ‘Performance analysis of a geothermal power plant. Case study: Comoros 
    Imamou, Abdoul-Enziz; Moustapha, Mohamadou; Yaya, Mounjouompou (Department of Mechanical and Production Engineering, 2021-03-30)
    The Khathala geothermal field in the Grande Comoros is under development. We propose design of a double flash geothermal power plant, which has a geofluid temperature of 2500 C. The performance analysis of this double ...
  • Assessment of Biogas Potential at IUT from Cafeteria Waste 
    Sayed, Abu; Islam, Khirul; Ali, Md. Hasan; Islam, Md. Shafiul (Department of Mechanical and Production Engineering, Islamic University of Technology, Board Bazar, Gazipur-1704, Bangladesh, 2021-03-30)
    Biogas is a source of clean energy and one kind of renewable energy resource which has highly influence in waste management. Anaerobic digestion is used in formation of biogas from different organic materials and it makes ...
  • Improvement of heat transfer in helical HX with multiple-head ribbed using water-based nanofluids 
    Hasan, Md. Jahid (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    This study shows the comparison between the helical and straight tube heat exchangers with multiple-head ribbed geometries. A computational fluid dynamics model with constant wall temperature condition was developed for ...
  • Heat transfer enhancement using different baffle Spacing arrangement 
    Rahman, Md. Muhibur (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    To enhance the heat transfer rate the feature of a shell and tube heat exchanger was developed by considering the baffle spacing and baffle cut.The research in this project was carried by manual calculations and was performed ...
  • Waste to Energy : Potential of using activated carbon and rice husk ash in primary cells 
    Hossain, Arman; Maroof, Irteza; Mahmud, Md. Fahim (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    Rapid growth of population has brought up some serious concerns, such as waste management and excessive use of fossil fuels causing pollution and negative impact on climate change. A large portion of the waste is organic ...
  • Vibration Analysis of Rotary Drill Rig and Modification Using Absorber Technique 
    Sadeque, Sumaiya Binta; Rahan, Md. Asif (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    Rotary drill rig being an essential tool in construction engineering, reducing its vibration became necessary due to avoiding any kind of fracture or failure. With the depth of hole getting increased, the vibration becomes ...
  • Vibration Analysis of Multi-Story Structures 
    Anam, S.M. Nazrul; Fahim, Abid Md. (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    To determine the dynamic characteristics and properties of an object, Modal analysis, and Harmonic response analysis both are quite essential tools. Natural frequency is a significant dynamic parameter as every structure ...
  • Thermodynamic Analysis of Cascade Refrigeration System for Low Temperature Applications 
    Faruque, Md Walid; Nabil, Mahdi Hafiz (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    In recent years, concern about global warming and ozone layer depletion has been growing. Increasing attention is being given to refrigerants used in refrigeration and air-conditioning systems as they have a signi cant ...
  • Techno-Economic and Environmental Feasibility Analysis of Solar water Heating System for a Textile Industry In Bangladesh 
    Rahman, Md. Ashiqur; Salahuddin, R.R.M.; Shoieb (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    Considering the energy crisis and environmental concerns, green energy technologies are being focused to harness energy from every available source. Extraction of thermal energy using solar collector is one such technology ...
  • Study of the Applicability of Chemical Precipitation and Electrocoagulation Method for Chromium Recovery in CETP at Savar Leather Industrial Park 
    Rahman, Sazedur; Karim, Tasdee Al; Khan, Munabbih Hasan Nadid (Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh, 2021-03-30)
    When we visited tanneries at Savar Tannery Industrial Estate in order to gain a deeper understanding of the leather tanning industry of Bangladesh, we realized that the lack of environmental compliance certification is ...

Search IUT Repository


Advanced Search

Browse

My Account