Development of A Novel Single Phase Non-isolated AC-DC Buck-Boost Converter

Ahmed, Istiak

IUT Repository Home
→
Electrical and Electronics Engineering (EEE)
→
Thesis
→
Graduate
→
2021
→
View Item

dc.contributor.author	Ahmed, Istiak
dc.date.accessioned	2021-02-05T03:56:09Z
dc.date.available	2021-02-05T03:56:09Z
dc.date.issued	2021-01-31
dc.identifier.citation	[1] N. Mohan and T. M. Undeland, Power electronics: converters, applications, and design: John wiley & sons, 2007. [2] K. W. E. Cheng, Classical switched mode and resonant power converters: The Hong Kong Polytechnic University, 2002. [3] B. Singh, S. Singh, A. Chandra, and K. Al-Haddad, "Comprehensive study of single-phase AC-DC power factor corrected converters with high-frequency isolation," IEEE transactions on Industrial Informatics, vol. 7, pp. 540-556, 2011. [4] S.-H. Ham, H.-J. Choe, H.-S. Lee, and B. Kang, "Improvement of Power-Conversion Efficiency of AC–DC Boost Converter Using 1: 1 Transformer," IEEE Transactions on Power Electronics, vol. 33, pp. 6646-6655, 2017. [5] R. Dayal, S. Dwari, and L. Parsa, "Design and implementation of a direct AC–DC boost converter for low-voltage energy harvesting," IEEE Transactions on Industrial Electronics, vol. 58, pp. 2387-2396, 2010. [6] M. Pahlevaninezhad, P. Das, J. Drobnik, P. K. Jain, and A. Bakhshai, "A ZVS interleaved boost AC/DC converter used in plug-in electric vehicles," IEEE Transactions on Power Electronics, vol. 27, pp. 3513-3529, 2012. [7] S. Dwari and L. Parsa, "An efficient AC–DC step-up converter for low-voltage energy harvesting," IEEE Transactions on Power Electronics, vol. 25, pp. 2188-2199, 2010. [8] J. Gnanavadivel, V. Chellappa, and N. S. Kumar, "Comparison of power quality improvement techniques in ac-dc Cuk converter," in 2011 International Conference on Computer, Communication and Electrical Technology (ICCCET), 2011, pp. 400-404. [9] G. Sarowar, M. A. Hoque, and M. A. Choudhury, "Simulation of High Efficiency Switched Capacitor AC to DC SEPIC Converter for Improved Power Quality," International Journal of Computer Science and Network Security (IJCSNS), vol. 16, p. 9, 2016. [10] M. A. M. Noh and A. O. Udoh, "A performance comparison between bridgeless AC-DC Cuk and Sepic converter," in AIP Conference Proceedings, 2019, p. 020059. [11] S. Sakib, M. Khan, F. Hasan, M. Rahman, and M. Reza, "DC-DC and AC-DC Zeta and buck converter design and analysis for high efficiency application," Department of Electrical and Electronic Engineering, Islamic University of …, 2017. [12] D. Grant and Y. Darroman, "Watkins-Johnson converter completes tapped inductor converter matrix," Electronics letters, vol. 39, pp. 271-272, 2003. [13] S. Li, K. W. E. Cheng, Y. Ye, and Z. Shi, "Wide input and wide output topology analysis for tapped-inductor converters with consideration of parasitic elements," IET Power Electronics, vol. 9, pp. 1952-1961, 2016. 92 [14] A. Chadha, A. Ayachit, D. K. Saini, and M. K. Kazimierczuk, "Steady-state analysis of PWM tapped-inductor buck DC-DC converter in CCM," in 2018 IEEE Texas Power and Energy Conference (TPEC), 2018, pp. 1-6. [15] G. Hua and F. C. Lee, "Soft-switching techniques in PWM converters," in Proceedings of IECON'93-19th Annual Conference of IEEE Industrial Electronics, 1993, pp. 637-643. [16] Y. Zhang and P. C. Sen, "A new soft-switching technique for buck, boost, and buck-boost converters," IEEE transactions on Industry Applications, vol. 39, pp. 1775-1782, 2003. [17] H. A. Toliyat, A. Balakrishnan, M. Amirabadi, and W. Alexander, "Soft switched ac-link AC/AC and AC/DC buck-boost converter," in 2008 IEEE Power Electronics Specialists Conference, 2008, pp. 4168-4176. [18] K.-H. Liu and F. C. Lee, "Zero-voltage switching technique in DC/DC converters," IEEE transactions on power electronics, vol. 5, pp. 293-304, 1990. [19] A. Radić, S. Ahssanuzzaman, B. Mahdavikhah, and A. Prodić, "High-power density hybrid converter topologies for low-power dc-dc smps," in 2014 International Power Electronics Conference (IPEC-Hiroshima 2014-ECCE ASIA), 2014, pp. 3582-3586. [20] M. I. Marei, I. Abdallah, and H. Ashour, "Transformerless uninterruptible power supply with reduced power device count," Electric Power Components and Systems, vol. 39, pp. 1097-1116, 2011. [21] I. Abdelsalam, G. P. Adam, D. Holliday, and B. W. Williams, "Modified back-to-back current source converter and its application to wind energy conversion systems," IET Power electronics, vol. 8, pp. 103-111, 2014. [22] D. Xu and Z. Luo, "A novel AC-DC converter for PMSG variable speed wind energy conversion systems," in 2009 IEEE 6th International Power Electronics and Motion Control Conference, 2009, pp. 1117-1122. [23] A. Fernandez, J. Sebastián, M. M. Hernando, J. A. Martin-Ramos, and J. Corral, "Multiple output AC/DC converter with an internal DC UPS," IEEE Transactions on Industrial Electronics, vol. 53, pp. 296-304, 2006. [24] F. Wang, H. Zhang, and X. Ma, "Intermediate-scale instability in two-stage power-factor correction converters," IET power electronics, vol. 3, pp. 438-445, 2010. [25] A. El Aroudi, M. Orabi, R. Haroun, and L. Martinez-Salamero, "Asymptotic slow-scale stability boundary of PFC AC–DC power converters: theoretical prediction and experimental validation," IEEE Transactions on Industrial Electronics, vol. 58, pp. 3448-3460, 2011. [26] G. K. Andersen and F. Blaabjerg, "Current programmed control of a single-phase two-switch buck-boost power factor correction circuit," IEEE Transactions on Industrial Electronics, vol. 53, pp. 263-271, 2006. 93 [27] I. Abdelsalam, G. P. Adam, D. Holliday, and B. W. Williams, "Single-stage, single-phase, ac–dc buck–boost converter for low-voltage applications," IET Power Electronics, vol. 7, pp. 2496-2505, 2014. [28] I. Abdelsalam, G. P. Adam, D. Holliday, and B. W. Williams, "Single-stage ac–dc buck–boost converter for medium-voltage high-power applications," IET Renewable Power Generation, vol. 10, pp. 184-193, 2016. [29] L.-S. Yang and E.-C. Chang, "Analysis of modified single-phase PFC AC-DC buck-boost converter," in 2011 First International Conference on Robot, Vision and Signal Processing, 2011, pp. 272-275. [30] D.-K. Kwak, B.-S. Lee, C.-S. Kim, and J.-S. Shim, "A study on novel buck-boost AC-DC converter of high performance by partial resonance technique," in 2007 7th Internatonal Conference on Power Electronics, 2007, pp. 266-270. [31] A. K. Jha, B. Fernandes, and A. Kishore, "A single phase single stage AC/DC converter with high input power factor and tight output voltage regulation," PIERS Online, vol. 2, pp. 322-329, 2006. [32] A. Hernadi, R. Rudianto, and M. Anwari, "Performance study of power factor correction circuits," 2007. [33] O. García, J. A. Cobos, R. Prieto, P. Alou, and J. Uceda, "Single phase power factor correction: A survey," IEEE Transactions on Power Electronics, vol. 18, pp. 749-755, 2003. [34] C. Qiao and K. M. Smedley, "A topology survey of single-stage power factor corrector with a boost type input-current-shaper," IEEE Transactions on Power Electronics, vol. 16, pp. 360-368, 2001. [35] B. Singh, B. N. Singh, A. Chandra, K. Al-Haddad, A. Pandey, and D. P. Kothari, "A review of single-phase improved power quality AC-DC converters," 2003. [36] H. Wei and I. Batarseh, "Comparison of basic converter topologies for power factor correction," in Proceedings IEEE Southeastcon'98'Engineering for a New Era', 1998, pp. 348-353. [37] J. C. Salmon, "Techniques for minimizing the input current distortion of current-controlled single-phase boost rectifiers," IEEE Transactions on Power Electronics, vol. 8, pp. 509-520, 1993. [38] R. Erickson, M. Madigan, and S. Singer, "Design of a simple high-power-factor rectifier based on the flyback converter," in IEEE Applied Power Electronics Conference, 1990, pp. 792-801. [39] D. Tollik and A. Pietkiewicz, "Comparative analysis of 1-phase active power factor correction topologies," in [Proceedings] Fourteenth International Telecommunications Energy Conference-INTELEC'92, 1992, pp. 517-523. [40] O. Lopez, L. G. De Vicuna, M. Castilla, J. Matas, and M. López, "Sliding-mode-control design of a high-power-factor buck-boost rectifier," IEEE Transactions on Industrial Electronics, vol. 46, pp. 604-612, 1999. 94 [41] M. Brkovic and S. Cuk, "Input current shaper using Cuk converter," in [Proceedings] Fourteenth International Telecommunications Energy Conference-INTELEC'92, 1992, pp. 532-539. [42] P. F. de Melo, R. Gules, E. F. R. Romaneli, and R. C. Annunziato, "A modified SEPIC converter for high-power-factor rectifier and universal input voltage applications," IEEE Transactions on Power Electronics, vol. 25, pp. 310-321, 2010. [43] J. Wei, P. Xu, H.-P. Wu, F. C. Lee, K. Yao, and M. Ye, "Comparison of three topology candidates for 12 V VRM," in APEC 2001. Sixteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No. 01CH37181), 2001, pp. 245-251. [44] R. Ridley, "Analyzing the SEPIC converter," Power Systems Design Europe, pp. 14-18, 2006. [45] S. J. B. Ong and Y. J. Cheng, "An overview of international harmonics standards and guidelines (IEEE, IEC, EN, ER and STC) for low voltage system," in 2007 International Power Engineering Conference (IPEC 2007), 2007, pp. 602-607. [46] R. N. Beres, X. Wang, M. Liserre, F. Blaabjerg, and C. L. Bak, "A review of passive power filters for three-phase grid-connected voltage-source converters," IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 4, pp. 54-69, 2015. [47] N. Mohan, H. Peterson, W. Long, G. Dreifuerst, and J. Vithayathil, "ACTIVE FILTERS FOR AC HARMONIC SUPPRESSION," in IEEE Power Eng Soc, Winter Meeting, 2017. [48] S. Li, W. Qi, S.-C. Tan, S. R. Hui, and H. Wang, "Bi-directional active-filter-integrated AC/DC converter without electrolytic capacitor and extra power switches," in 2015 IEEE Energy Conversion Congress and Exposition (ECCE), 2015, pp. 653-660. [49] R. Tripathi and S. Das, "Utility friendly magnetic load supply," in 36th IEEE Power Electronics Specialists Conference., 2005. [50] J. Zhang, M. M. Jovanovic, and F. C. Lee, "Comparison between CCM single-stage and two-stage boost PFC converters," in APEC'99. Fourteenth Annual Applied Power Electronics Conference and Exposition. 1999 Conference Proceedings (Cat. No. 99CH36285), 1999, pp. 335-341. [51] E. P. S. M. Association, "Harmonic Current Emissions Guidelines to the standard EN 61000-3-2," Revision Date, pp. 11-08, 2010. [52] K.-H. Liu and Y.-L. Lin, "Current waveform distortion in power factor correction circuits employing discontinuous-mode boost converters," in 20th Annual IEEE Power Electronics Specialists Conference, 1989, pp. 825-829. [53] L. Petersen and M. Andersen, "Two-stage power factor corrected power supplies: The low component-stress approach," in APEC. Seventeenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No. 02CH37335), 2002, pp. 1195-1201. 95 [54] Y.-W. Cho, J.-M. Kwon, and B.-H. Kwon, "Single Power-Conversion AC--DC Converter With High Power Factor and High Efficiency," IEEE transactions on power electronics, vol. 29, pp. 4797-4806, 2013. [55] N. Ashraf, T. Izhar, G. Abbas, A. R. Yasin, and A. R. Kashif, "Power quality analysis of a three phase ac-to-dc controlled converter," in 2017 International Conference on Electrical Engineering (ICEE), 2017, pp. 1-6. [56] M. M. S. Khan, M. S. Arifin, M. R. T. Hossain, M. A. Kabir, A. H. Abedin, and M. Choudhury, "Input switched single phase buck and buck-boost AC-DC converter with improved power quality," in 2012 7th International Conference on Electrical and Computer Engineering, 2012, pp. 189-192. [57] G. Sarowar and M. A. Hoque, "High Efficiency Single Phase Switched Capacitor AC to DC Step Down Converter," Procedia-Social and Behavioral Sciences, vol. 195, pp. 2527-2536, 2015. [58] K. Saifullah, M. A. Al Hysam, M. Z. U. Haque, S. Asif, G. Sarowar, and M. T. Ferdaous, "Bridgeless AC-DC buck-boost converter with switched capacitor for low power applications," in TENCON 2017-2017 IEEE Region 10 Conference, 2017, pp. 1761-1765. [59] T. Sutikno, "IEEE trial-use standard definitions for the measurement nnon-sinusoidalower quantities under sinusoidal, nonsinusoidal, balanced, or unbalanced conditions," IEEE Std 1459-2000, 2011. [60] K. Rustom, "Steady state and dynamic analysis and optimization of single-stage power factor correction converters," 2007. [61] K. Rezaei, "A Control Scheme for an AC-DC Single-Stage Buck-Boost PFC Converter with Improved Output Ripple Reduction," 2012.	en_US
dc.identifier.uri	http://hdl.handle.net/123456789/805
dc.description	Supervised by Dr. Golam Sarowar Professor Department of Electrical and Electronic Engineering Islamic University of Technology (IUT), Board Bazar, Gazipur-1704	en_US
dc.description.abstract	Switched mode power converters have been studied broadly and used in industrial products. The classification comes as Buck, Boost and Buck-Boost for the basic topology in which single inductor is presented and also Cuk, Sepic and Zeta for higher order topology in which two inductors are presented in the circuit. A new topology of Single –Phase AC-DC Buck-Boost converter is presented in this thesis book. Conventional AC-DC converters use full-wave bridge rectifier that has the drawbacks like pulsating input current, high electromagnetic interference (EMI), high crest factor, low input power factor, low efficiency, and harmonic pollution at power system etc. Instead of using a single phase rectifier followed by DC-DC converter, two inductors and two capacitors are used with suitable combination of switch and diodes. The proposed converter provides better conversion efficiency than the conventional converter throughout the variation of duty cycle. Input power factor of the proposed converter is less than the conventional converter for lower and higher duty cycles. By using suitable feedback control in closed loop system, the problem of low input power factor has been corrected. The proposed converter with PFC controller provides very high input power factor (0.994) which is almost close to unity. The proposed converter has lesser total harmonic distortion (THD) of input current in comparison with the conventional one for higher duty cycles but for lower duty cycles the conventional converter shows better performance Again, using the feedback controller, the THD of input current is kept close to IEEE Standards for the proposed converter. The proposed converter with feedback controller provides higher conversion efficiency, reduced total harmonic distortion (THD) of input current and quality power factor. Dynamic response of the proposed converter has also been observed. The proposed converter can maintain a desired level of output voltage with sudden changes in load. Analysis and simulation results of the circuit are obtained using software simulation. The main advantage of this new AC-DC converter is it’s superior efficiency over conventional AC-DC converters.	en_US
dc.language.iso	en	en_US
dc.publisher	Department of Electrical and Electronic Engineering, Islamic University of Technology,Board Bazar, Gazipur, Bangladesh	en_US
dc.title	Development of A Novel Single Phase Non-isolated AC-DC Buck-Boost Converter	en_US
dc.type	Thesis	en_US