- IUT Repository Home
- →
- Mechanical and Production Engineering (MPE)
- →
- Thesis
- →
- Undergraduate
- →
- 2013
- →
- View Item
JavaScript is disabled for your browser. Some features of this site may not work without it.
| dc.contributor.author | Russel, Md. Omar Faruque | |
| dc.date.accessioned | 2021-09-08T06:16:07Z | |
| dc.date.available | 2021-09-08T06:16:07Z | |
| dc.date.issued | 2013-11-15 | |
| dc.identifier.citation | 1. E.O. Ezugwua, D.A Fadera, J. Bonneya, R.B. Da silvaa and W.F. Salesa, “Modeling the Correlation between Cutting and Process Parameters in High Speed Machining of Inconel 718 Alloy Using An Artificial Neural Network”, International. Journal. of Machine Tools and Manufacture, Vol.45, pp.1375-1385, 2005 2. Shaw MC (1984) Metal cutting principles. Oxford Science, Oxford, UK 3. Hastings, W.F., and Oxley, P.L.B, “Predicting tool life from fundamental work material properties and cutting conditions”, Annals of the CIRP, pp. 33–38(1976). 4. Opitz, H. and Konig, W., “On the wear of cuttingtools”, proceedings of the 8th International MTDR Conference, pp. 173-190(1967). 5. Wright, P.K, “Correlation of tool wear mechanisms with slip line fields for cutting in: K. Ludema (Ed.)”, Wear of Materials, ASME, pp. 482–488(1981). 6. Kurimoto, T. and Barrow, G., “The influence of aqueous fluids on the wear characteristics and life of carbide cutting tool”, Annals of the CIRP, pp. 19-25 (1982). 7. Usui, E., “Progress of predictive theories in metal cutting”, International Journal of Japan Society of Mechanical Engineers, Vol. 31 (2), pp. 363–369 (1998). 8. B. Sick,, “On-Line and Indirect Tool Wear Monitoring in Turning with Artificial Neural Networks: A Review of More Than A Decade of Research”, Mechanical Systems and Signal Processing, Vol.16, pp.487– 546, 2002. 9. D. E. Dimla, P.M. Lister and N.J. leightont, “Neural Network Solutions to the Tool Condition Monitoring Problem in Metal Cutting- A Critical Review Of Methods”, International Journal of Machine Tools and Manufacture, Vol.39, pp.1219-1241, 1997 10. Y. Liu and C. Wang, “Neural Network Based Adaptive Control and Optimization in the Milling Process”, International Journal of Advanced Manufacturing and Technology, Vol.15, pp.791–795, 1999 11. V. Karri,, “Performance in Oblique Cutting Using Conventional Methods and Neural Networks”, Neural Comput. Appl., Vol.8, pp.196– 205, 1999 108 12. X. Li,, S. Dong and P.K. Venuvinod, “Hybrid Learning for Tool Wear Monitoring”, International Journal of Advanced Manufacturing and Technology, Vol.16, pp.303–307, 2000 13. S. Elanayar and Y.C. Shin, “Robust Tool Wear Estimation with Radial Basis Function Neural Networks”, ASME Journal of Dynamic Systems, Measurement and Control, Vol.117, pp.459–467, 1995 14. A. Ghasempoor, J. Jeswiet and T.N. Moore, “Real Time Implementation of on-Line Tool Condition Monitoring in Turning”, Int. Journal of Machine Tools and Manufacture, Vol.39, pp.1883–1902, 1999 15. Q. Liu and Y. Altintas., “On-Line Monitoring of Flank Wear in Turning with Multilayered Feed-Forward Neural Network”, Int. Journal of Machine Tools and Manufacture, Vol.39, pp.1945–1959, 1999 16. R. Azouzi and M. Guillot, “On-Line Prediction of Surface Finish and Dimensional Deviation in Turning Using Neural Network Based Sensor Fusion”, International Journal of Machine Tools and Manufacture, Vol. 37 (9), pp.1201–1217, 1997 17. Kalpakjian, S. and Schmid, S.R., “Manufacturing Processes for Engineering Materials”, 5th Edition, Pearson Education Inc., pp. 440-447(2009). 18. Ginta, T.L, Amin, A.K.M.N. and Patwari, A.U., “Tool Wear Morphology And Chip Segmentation In End Milling Titanium Alloy Ti-6AL-4V”, Proceedings of CUTSE Int. Conference, (2008). 19. Matsumoto, Y., Hashimoto, F. and Lahoti, G., “Surface Integrity Generated By Precision Hard Turning”, Annals of the CIRP, Vol. 48(1), pp. 59-62 (1999). 20. Thiele, J. D., and Melkote, S. N.,“Effect Of Cutting Edge Geometry And Work piece Hardness On Surface Generation In The Finish Hard Turning Of AISI 52100 Steel,” Journal of Materials Processing Technology, Vol. 94, pp. 216-226 (1999). 21. Dawson, T. G. and Kurfess, T. R.,“Machining Hardened Steel With Ceramic-Coated And Uncoated CBN Cutting Tools”, Technical Paper -Society of Manufacturing Engineers, MR 02-156, pp. 1-7 (2002). 109 22. Özel, T., Hsu, T. K. and Zeren, E.,“Effects Of Cutting Edge Geometry, Workpiece Hardness, Feed Rate And Cutting Speed On Surface Roughness And Forces In Finish Turning Of Hardened AISI H13 Steel,” International Journal of Advanced Manufacturing Technology, (2004). 23. V.A. Bobrovoskii, Russ. Eng. J. 18 (1966) 70. 24. M. Kanji; D.K. Pal, Proceedings of the Third AIMTDR Conference, Bombay, 1969. 25. Zhou Q., Hong G. S. and Rahman M., (1995), “A New Tool Life Criterion For Tool Condition Monitoring Using a Neural Network”, Engineering Application Artificial Intelligence, Volume 8, Number 5, pp. 579-588. 26. H. Bisht, J. Gupta, S.K. Pal and D. Chakraborty, “Artificial Neural Network Based Prediction of Flank Wear in Turning”, International Journal of Materials and Product Technology, Vol. 22(4), pp. 328-338, 2005 27. D.Y. Jang, Y.G. Choi, H.G. Kim and A. Hsiao,“ Study of the Correlation between Surface Roughness and Cutting Vibrations to Develop An on-Line Roughness Measuring Technique In Hard Turning”, International Journal of Machine Tools and Manufacture , Vol. 36, pp.453–464, 1996. 28. W. Grzesik, “A Revised Model for Predicting Surface Roughness in Turning”, Wear, Vol. 194 pp. 143–148, 1996 29. B.Y. Lee, Y.S. Tarng, H.R. Lii,, “An Investigation of Modeling of the Machining Database in Turning Operations”, Journal of Materials Processing Technology, Vol. 105 pp. 1–6, 2000. 30. X.P. Li, K. Iynkaran and A.Y.C. Nee, “A Hybrid Machining Simulator Based on Predictive Machining Theory and Neural Network Modeling”, Journal of Material Processing Technology, Vol.89/90, pp.224–230, 1999 31. W Matsumura, T., Sekiguchi, H and E. Usui, “An Evaluation Approach of Machine Tool Characteristics with Adaptive Prediction”, Journal of Materials Processing Technology, Vol. 62, pp. 440–447, 1996. 110 32. S.-Y. Ho, K.-C. Lee, S.-S. Chen and S.-J. Ho, “Accurate Modeling and Prediction of Surface Roughness by Computer Vision in Turning Operations Using An Adaptive Neuro-Fuzzy Inference System”, International Journal of machine Tools and Manufacture, Vol. 4, pp. 1441–1446, 2002 33. Braghini, A. Jr., and Coelho, R.T, “An Investigation Of The Wear Mechanisms Of Polycrystalline Cubic Boron Nitride (PCBN) Tools When End Milling Hardened Steels At Low/Medium Cutting Speeds,” International Journal on Advanced Manufacturing Technology, Vol. 17, pp. 244-257 (2001). 34. Kumar, S., Durai, A.R. and Sornakumar, A. “The Effect Of Tool Wear On Tool Life Of Alumina-Based Ceramic Cutting Tools While Machining Hardened Martensitic Stainless Steel,” Journal of Materials Processing Technology, Vol. 173, pp. 151-156 (2006). 35. Ghani, J.A., Choudhury, I.A. and Hassan, H.H., “Application of taguchi method in the optimization of end milling parameters,” Journal of Materials Processing Technology, Vol. 145, pp. 84-92 (2004). 36. Mativenga P.T., Abdukhsim N.A., Sheikh M.A. and Hon B.K.K., An Investigation of Tool Chip Contact Phenomena in High-Speed Turning Using Coated Tools, Sage Publications, 20(5), 657-667 (2006) 37. Sutter G., Faure L., Molinari A., Ranc N. and Pina V., An experimental technique for the measurement of temperature fields for the orthogonal cutting in high speed machining, International Journal of Machine Tools and Manufacture, 43(7), 671-678 (2003) 38. Astakhov V.P. and Shvets S.V., A Novel Approach to Operating Force Evaluation in High Strain Rate Metal- Deforming Technological process, Journal of Material Processing Technology, 117(1-2), 226-237 (2001) 39. Lalwani D.I., Mehta N.K., Jain P.K., Experimental Investigations of Cutting Parameters Influence on Cutting Forces and Surface Roughness in Finish Hard Turning of MDN250 Steel, Journal of Material Processing Technology, 206(1-3), 167-179 (2007) 111 40. Gupta B., Gopala K.V. and Yadav J.S., Aerospace materials: With General Metallurgy for Engineers, S. Chand and Co. Ltd., New Delhi, India (1996) 41. Aneiro F.M., Coelho R.T. and Brandao L.C., Turning Hardened Steel Using Coated Carbide at High Cutting Speeds, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 30(2), 104-109 (2008) 42. Abele E., Dietz S. and Schiffler A., Analysis of Cutting Force during Milling with regards to the dependency on the penetration angle, Production Engineering, 3, 483-487 (2009) 43. Patel K., Batish A. and Bhattacharya A., Optimization of Surface Roughness in an end-milling operation using nested experimental design, Production Engineering, 3(4- 5), 361-373 (2009) 44. Miles J., R-squared, Adjusted R-squared, Encyclopaedia of Statisticsin Behavioural Science, John Wiley and Sons, Ltd, (2005) 45. Ricci L. and Martínez R., Adjusted R2-type measures for Tweedie models, Computational Statistics and Data Analysis, 52(3), 1650-1660 (2008) 46. Amin, A. K. M. N., Hafiz, A. M. K., Lajis, M. A. and Patwari, A. U., “Prediction of tool life and experimental investigation during hot milling of AISI H13 tool steel,” Advanced Materials Research, Vol. 83-86, pp. 190-197 (2010). 47. Takeyama, H. And Murata, R., “Basic Investigation of Tool Wear”, Trans.ASME, J. Eng. Ind. Vol. 85, pp. 33–38 (1963). 48. M.K. Muju, A. Radhakrishna, Wear 58 (1980) 49 49. M.K. Muju; A. Ghosh, ASME Paper 75-PT-5, 1975. 50. M.K. Muju, A. Ghosh, Wear 41 (1977) 103. 51 .M.K. Muju, A. Ghosh, Wear 58 (1980) 137. 52. Oxley, P.L.B., “The Mechanics of Machining: An Analytical Approach to Assessing Machinability”, Ellis Horwood, Chichester, (1989). 112 53 .Arsecularatne, J.A., “On prediction of tool life and tool deformation conditions in machining with restricted contact tools”, International Journal of Machine Tools and Manufacture, Vol. 43, pp. 657–669 (2003). 54. Arsecularatne, J.A., “Prediction of tool life for restricted contact and grooved tools based on equivalent feed”, International Journal of Machine Tools and Manufacture, Vol. 44, pp. 1271–1282 (2004). 55. Kitagawa, T., Maekawa, K., Shirakashi, T. and Usui, E., “Analytical prediction of flank wear of carbide tools in turning plain carbon steels (part 1)”, Japanese Society of Precision Engineering, Vol. 22 (4), pp. 263–269 (1988). 56. Iwata, K., Ashara, J. and Okushima, K., “On the mechanism of built-up edge formation in cutting”, Annalsof the CIRP, Vol.19 (2), pp. 323–330 (1971). 57. Trent EM, Wright PK (2000) Metal cutting. Butterworth–Heinemann, Boston, MA 58. Srikanth T. and Kamala V., (2008), “A Real Coded Genetic Algorithm for Optimization of Cutting Parameters in Turning IJCSNS”, International Journal of Computer Science and Network Security, Volume 8 Number 6, pp. 189-193. 59. Lin, W. S., Lee B. Y., Wu C. L., “Modeling the surface roughness and cutting force for turning”, Journal of Materials Processing Technology, Vol. 108, pp. 286-293(2001). 60. Kirby, E. D., Zhang, Z. and Chen, J. C., “Development of An Accelerometer based surface roughness Prediction System in Turning Operation Using Multiple Regression Techniques”, Journal of Industrial Technology, Vol. 20 (4), pp. 1-8 (2004). 61. Özel, T. and Karpat, Y.,“Predictive modeling of surface roughness and tool wear in hard turning using regression and neural networks”, International Journal of Machine Tools and Manufacture, Vol.45, pp. 467–479 (2005). 62. Singh, H. and Kumar, P., “Optimizing Feed Force for Turned Parts through the Taguchi Technique”, Sadhana, Vol. 31(6), pp. 671–681(2006). 113 63. Ahmed, S. G., “Development of a Prediction Model for Surface Roughness in Finish Turning of Aluminium”, Sudan Engineering Society Journal,Vol. 52 (45), pp. 1-5 (2006). 64. Abburi, N. R. and Dixit, U. S., “A knowledge-based system for the prediction of surface roughness in turning process”, Robotics and Computer-Integrated Manufacturing, Vol. 22, pp. 363–372 (2006). 65. Zhong, Z. W., Khoo, L. P. and Han, S. T., “Prediction of surface roughness of turned surfaces using neural networks”, International Journal of Advance Manufacturing Technology, Vol. 28, pp. 688–693(2006). 66. Doniavi, A., Eskanderzade, M. and Tahmsebian, M.,“Empirical Modeling of Surface Roughness in Turning Process of 1060 steel using Factorial Design Methodology”, Journal of Applied Sciences, Vol. 7 (17), pp. 2509-2513 (2007). 67. Kassab, S. Y. and Khoshnaw, Y. K., “The Effect of Cutting Tool Vibration on Surface Roughness of Work piece in Dry Turning Operation”, Engineering and Technology, Vol. 25(7), pp. 879-889 (2007). 68. Biswas, C. K., Chawla, B. S., Das N. S., Srinivas, E. R. K. N. K.,“Tool Wear Prediction using Neuro-Fuzzy System”, Institution of Engineers (India) Journal (PR), Vol. 89, pp. 42-46 (2008). 69. A. G. Rehorn, J. Jiang, and P. E. Orban, “State-of the art methods and results in tool conditioning monitoring: a review”, International Journal of Advanced Manufacturing Technology , vol. 26, pp. 693- 710, 2005. 70. Patwari, A. U., Arif, M. D. and Mahmood, M.N., “An innovative application of Digital Image Processing to Analyze Tool wear in Turning Operation”, Submitted to INRIT 2012, Thailand (2012). 71. Anayet U. Patwari, Arif M.D., Chowdhury N.A., and Chowdhury Md. S. I., “3-D contour generation and determination of surface roughness and determination of surface roughness of shaped and horizontally milled plates using digital image processing,” International Journal of Engineering, Annals of Faculty of Engineering, Hunedoara, Romania. 114 72. Arif M.D., Patwari A.U., Chowdhury N.A., “Surface roughness characterization using digital image processing technique.” Proceedings of the 13th Annual Paper Meet, Mechanical Engineering Department, Institute of Engineers, Bangladesh (2010). 73. G. T. Smith, The Machinability and Surface Integrity of Engineering Components, Chapter 6 of Advanced Machining: The Handbook of Cutting Technology, IFS Publications Ltd., 1989 74. Md. Anayet U. Patwari, M.N. Mahmood, Shafi Noor, Md. Ziaul Haque Shovon, “Investigation of machinability responses during magnetic field assisted turning process of preheated mild steel” Submitted to 5th BSME-ICTE, Bangladesh (2012) 75. Dr. Anayet U. Patwari, M.N. Mahmood, Shafi Noor, Md. Ziaul Haque Shovon, S.M. Tawfiqullah, “Study of the effect of external magnetic field on tool wear and surface roughness during turning operation of mild steel” Submitted to International Conference on Mechanical, Industrial and Energy Engineering 2012,Khulna, Bangladesh. | en_US |
| dc.identifier.uri | http://hdl.handle.net/123456789/879 | |
| dc.description | Supervised by Dr. Md. Anayet Ullah Patwari, Professor Department of Mechanical & Chemical Engineering (MCE), Islamic University of Technology(IUT) Board Bazar, Gazipur-1704 | en_US |
| dc.description.abstract | This project aims to investigate the effects of ultrasonic sound signal on the machinability control of mild steel during turning operation. The machinability responses include tool wear, surface roughness, temperature, chip morphology. A control experiment was also done where no ultrasonic sound is applied at all. Turning is a form of machining which is used to create rotational parts by removing unwanted material. In turning process sometimes tool life, machined surface quality is damaged because of formation of chatter. Chatter causes unwanted excessive vibratory motion in between the tool and the work-piece causing adverse effects on the product quality and machine-tool and tool life. In addition to the damage of the work-piece surface due to chatter marks, the occurrence of severe chatter results in many adverse effects, which include poor dimensional accuracy of the work-piece, reduction of tool life, and damage to the machine. The main purpose of this research is to send sound signal in the cutting processes and to investigate the effect of ultrasonic sound waves signal during turning operation on the machinability responses such as tool wear, surface roughness, and chip behavior. The ultrasonic sound wave that has been used is 40 KHZ. There are two ultrasound modules from where that sound wave has formed. The results show clear improvement in the machinability responses during the turning process which include significant reduction in the tool wear, improvement in surface quality, and decrease in the serration behavior of chips. The quality of the finished product along with the productivity play a significant role in today‟s manufacturing market. From customers‟ viewpoint quality is very important because the extent of quality of the produced item influences the degree of satisfaction of the consumers during usage of the product. Every manufacturing industry aims at producing a large number of products within relatively lesser time. But it is felt that reduction in manufacturing time may cause severe quality loss. However application of ultrasonic sound can result in the surface quality of the product conditioned by the cutting parameter. The surface quality during ultrasound cutting is significantly improved than that obtained from normal cutting. The 7 frequency change of ultrasonic sound also has some impact on the surface quality which is mainly because of the chip adhering to the tool during cutting operation. Behavior of chips indicate the vibration nature of the machine and the tool. Chips produced during cutting operation have some teeth in its cross section which have been viewed with microscope to find out the effect of these ultrasonic sounds on the serration behavior. Here also it is clearly shown that the teeth produced during ultrasound cutting are smaller in size whereas they are much bigger for normal cutting. This phenomenon indicates that application of external ultrasonic sound reduces the vibration of the machine tool. The increase of the force increases the temperature of the work piece and the tool insert. Having difficulties in measuring the temperature of the work piece, I have measured the temperature of the insert near the cutting junction with the aid of a thermocouple. The project is successful in establishing an improvement in tool life with the application of ultrasonic sound on the tool insert during turning operation. | en_US |
| dc.language.iso | en | en_US |
| dc.publisher | Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh | en_US |
| dc.title | Effect of ultrasonic sound wave on machinability parameters during turning operation of mild steel | en_US |
| dc.type | Thesis | en_US |
Files in this item
This item appears in the following Collection(s)
-
2013 [28]