Conversion of a simple bladeless standing fan into a split air conditioner

Abstract

In this project, Conversion of a simple blade less standing fan into a split air conditioning system is aimed, A split air conditioning imply means that the condenser (or sometimes referred to as the “outdoor unit”) is separated from the “indoor unit”, thus the term “split”. The separation of the two different part, splitting or bisecting the units into two: for the fan section it consist of (i) small vents at the base where air is being sucked (ii) the air is propelled through 3mm and slit in the frame 55mph. (iii) air passes over and airfoil is shaped ramp which channels it is direction, air intake. (iv) as it is pushed out at the surrounding air is drawn into the airflow in making the volume because there are no motor blades. For the air conditioning section, a copper connection pipe and electrical wiring connects the indoor unit to the outdoor unit of the split air conditioning. Gas refrigerant is pumped from the outdoor condenser coil and compressor through the connection pipe to the indoor unit or units. A fan then quietly distributes cool air drawn across the unit's evaporator coil. The main objective of this project is to convert a simple bladeless standing fan into a split air conditioning system and make use of it perfectly without any obstructions, High Electric supply and convenient to be moving around from one place to another comfortably. .