Designing and construction of an actuator

Hasan, Imran; Uddin, Imtiaz

IUT Repository Home
→
Mechanical and Production Engineering (MPE)
→
Thesis
→
Undergraduate
→
2013
→
View Item

dc.contributor.author	Hasan, Imran
dc.contributor.author	Uddin, Imtiaz
dc.date.accessioned	2021-09-08T09:45:56Z
dc.date.available	2021-09-08T09:45:56Z
dc.date.issued	2013-11-15
dc.identifier.citation	 SolidWorks 2012  Solid body contact tutorial-2006  Motion study-solidworks 2012  Solid-State Sensor and Actuator Workshop, 1992. 5th Technical Digest., IEEE  Micro-Nanomechatronics and Human Science, 2004 and The Fourth Symposium Micro-Nanomechatronics for Information-Based Society, 2004. Proceedings of the 2004 International Symposium  Control, Automation, Robotics and Vision, 2008. ICARCV 2008. 10th International Conference Electrical Machines and Systems, 2008. ICEMS 2008. International Conference	en_US
dc.identifier.uri	http://hdl.handle.net/123456789/900
dc.description	Supervised by Prof. Dr. Md. Zahid Hossain Dr. Mir Md. Maruf Morshed Department of Mechanical and Chemical Engineering (MCE), Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh.	en_US
dc.description.abstract	Actuator is a mechanism that puts something into automatic action.The goal of our project is to design and construct an actuator which will give an automatic action. For achieving this goal we needed to design a model of an actuator.By using designing software SOLIDWORKS we have proposed a design.After that we proceed with motion analysis of the system.From the analysis,we see that,we need some modification.Than we modified the design by consulting with our project teacher.When the designing part is completed,we look forward for its construction.Though we couldn’t establish the system completely in the lab yet,but if it is established in future then, It will supply and transmit a measured amount of energy for the operation of another mechanism or system. Nevertheless, there remains ample room for further development and analysis.	en_US
dc.language.iso	en	en_US
dc.publisher	Department of Mechanical and Production Engineering (MPE),Islamic University of Technology(IUT), Board Bazar, Gazipur, Bangladesh	en_US
dc.title	Designing and construction of an actuator	en_US
dc.type	Thesis	en_US